SOR-2016-311 Energy Efficiency Regulations, 2016

The following definitions apply in these Regulations.

In these Regulations, a reference to an energy-using product is a reference to that product as defined in the Division or Subdivision associated with it.

In these Regulations, a reference to an AHRI, ANSI, ASHRAE, CGA, CIE, CSA, IEC, IEEE, IES or NEMA standard or to a technical standards document is to be read as a reference to the standard or technical standards document as amended from time to time.

In these Regulations, a reference to a testing standard that is incorporated by reference does not include any test procedure waiver that may be set out in that standard.

Subject to subsection (4), every energy-using product that, for the purpose of sale or lease, is shipped from one province to another or imported into Canada must be labelled with a verification mark that is issued by

The verification mark must be readily visible on the surface of the energy-using product. However, in respect of the following energy-using products, the verification mark may be on the exterior of the product’s package:

An external power supply is not required to be labelled with a verification mark if

A dealer who, for the purpose of sale or lease, ships an energy-using product from one province to another or imports an energy-using product into Canada must, for the purpose of subsection 5(1) of the Act, provide the following information to the Minister:

The information must be provided electronically or by fax, hand delivery, courier or mail before the product is imported into Canada or shipped from one province to another.

Despite any provision in these Regulations requiring that the information referred to in this section be collected in accordance with an identified standard, a dealer may instead provide the information as generated by a mathematical model that, by means of an engineering or statistical analysis or a computer simulation or model, emulates the manner in which the information is collected under the identified standard.

A dealer who, for the purpose of sale or lease, imports an energy-using product into Canada must, for the purpose of subsection 5(1) of the Act, provide the following information to the Minister:

However, the following energy-using products are not energy-using products for the purpose of subsection (1) if, at the time of their importation, they are incorporated into another product:

The information must be provided by including it in any customs invoice or commercial invoice that is required to be provided in respect of the energy-using product under subsection 6(1) of the Accounting for Imported Goods and Payment of Duties Regulations and must be provided before the product is released under the Customs Act.

A dealer is exempt from the application of paragraph 4(1)(a) of the Act if the dealer, for the purpose of modifying an energy-using product to comply with the applicable energy efficiency standard, ships the product from the province in which it was manufactured to another province or imports the product into Canada.

The dealer must

An energy-using product prescribed in any of Subdivisions A to G or K of this Division must be labelled in the form set out in Schedule 1.

The label must be an adhesive tag, flap tag or hang tag that is attached to the product so that the tag is readily visible when the product is viewed from the front.

The paper that is used for adhesive tags or flap tags must weigh, exclusive of the release liner and adhesive, not less than the equivalent of 26.31 kg (58 pounds) per 500 sheets measuring 63.5 cm (25 inches) by 96.52 cm (38 inches).

The adhesive that is used to attach an adhesive tag or a flap tag to an energy-using product must

The paper that is used for hang tags must weigh not less than the equivalent of 49.9 kg (110 pounds) per 500 sheets measuring 64.77 cm (25.5 inches) by 77.47 cm (30.5 inches).

The material that is used to attach a hang tag to an energy-using product must be of sufficient strength to ensure that when gradual pressure is applied to the tag by pulling it away from the product, the tag will tear before the material breaks.

A clothes dryer is prescribed as an energy-using product.

However, for the purposes of sections 4, 5, 13 to 15 and 19, a clothes dryer is not considered to be an energy-using product unless it is manufactured on or after February 3, 1995.

The energy efficiency standards set out in column 2 of the table to this section apply to clothes dryers that are manufactured during the periods set out in column 3.

A clothes dryer complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 1 that are applicable to a clothes dryer as defined in section 16. TABLE Column 1 Column 2 Column 3 Item Testing Standard Energy Efficiency Standard Period of Manufacture 1 CSA C361-92 CSA C361-92, Table 8.1 On or after February 3, 1995 and before January 1, 2015 2 CSA C361-16 or 10 C.F.R. Appendix D2 CSA C361-16, Table 1 On or after January 1, 2015

A clothes washer is prescribed as an energy-using product.

However, a clothes washer is not considered to be an energy-using product

The energy efficiency standards set out in column 3 of the table to this section apply to clothes washers described in column 1 that are manufactured during the periods set out in column 4.

A clothes washer complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 2 that are applicable to a clothes washer as defined in section 21. TABLE Column 1 Column 2 Column 3 Column 4 Item Energy-using Product Testing Standard Energy Efficiency Standard Period of Manufacture 1 Clothes washers CSA C360-03 CSA C360-03, Table 9 On or after February 3, 1995 and before January 1, 2007 2 Clothes washers, other than household clothes washers CSA C360-03 CSA C360-03, Table 10 On or after January 1, 2007 and before January 8, 2013 3 Clothes washers, other than household clothes washers CSA C360-03 CSA C360-13, Table 11 On or after January 8, 2013 and before January 1, 2018 4 Clothes washers that are top-loaded, other than household clothes washers CSA C360-13 On or after January 1, 2018 5 Clothes washers that are front-loaded, other than household clothes washers CSA C360-13 On or after January 1, 2018 6 Household clothes washers CSA C360-03 CSA C360-03, Table 10 On or after January 1, 2007 and before March 7, 2015 7 Household clothes washers CSA C360-13 CSA C360-13, Table 9 On or after March 7, 2015 and before January 1, 2018 8 Household clothes washers CSA C360-13 CSA C360-13, Table 10 On or after January 1, 2018

For the purposes of these Regulations, the size category of an integrated clothes washer-dryer that is not a combination clothes washer-dryer is

For the purposes of these Regulations, the size category of an integrated clothes washer-dryer that is a combination clothes washer is

An integrated clothes washer-dryer is prescribed as an energy-using product.

However, for the purposes of sections 4, 5, 13 to 15 and 30, an integrated clothes washer-dryer is not considered to be an energy-using product unless it is manufactured on or after February 3, 1995.

The energy efficiency standards set out in column 2 of the table to this section apply to integrated clothes washer-dryers that are manufactured during the periods set out in column 3.

An integrated clothes washer-dryer complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 1 that are applicable to an integrated clothes washer-dryer as defined in section 26. TABLE Column 1 Column 2 Column 3 Item Testing Standard Energy Efficiency Standard Period of Manufacture 1 On or after February 3, 1995 and before January 1, 2007 2 On or after January 1, 2007 and before March 7, 2015 3 On or after March 7, 2015 and before January 1, 2018 4 On or after January 1, 2018

A dishwasher is prescribed as an energy-using product.

However, for the purposes of sections 4, 5, 13 to 15 and 37, a dishwasher is not considered to be an energy-using product unless it is manufactured on or after February 3, 1995.

The energy efficiency standards set out in column 3 of the table to this section apply to dishwashers described in column 1 that are manufactured during the periods set out in column 4.

A dishwasher complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 2 that are applicable to a dishwasher as defined in section 32. TABLE Column 1 Column 2 Column 3 Column 4 Item Energy-using Product Testing Standard Energy Efficiency Standard Period of Manufacture 1 Dishwashers CSA C373-04 CSA C373-04, Table 2 On or after February 3, 1995 and before January 1, 2010 2 Dishwashers that are standard CSA C373-04 Total annual energy consumption ≤ 355 kWh On or after January 1, 2010 and before May 30, 2013 3[Repealed, SOR/2018-201, s. 11] 4 Dishwashers that are compact CSA C373-04 Total annual energy consumption ≤ 260 kWh On or after January 1, 2010 and before May 30, 2013 5 Dishwashers CSA C373-14 CSA C373-14, Table 2 On or after May 30, 2013

Refrigerators and combination refrigerator-freezers are prescribed as energy-using products.

However, for the purposes of sections 4, 5, 13 to 15 and 43, a refrigerator or combination refrigerator-freezer is not considered to be an energy-using product unless it is manufactured on or after February 3, 1995.

The energy efficiency standards set out in column 3 of the table to this section apply to refrigerators and combination refrigerator-freezers described in column 1 that are manufactured during the periods set out in column 4.

A refrigerator complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 2 that are applicable to a refrigerator as defined in section 39.

A combination refrigerator-freezer complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 2 that are applicable to a combination-refrigerator freezer as defined in section 39. TABLE Item Column 1 Column 2 Column 3 Column 4 Energy-using Product Testing Standard Energy Efficiency Standard Period of Manufacture 1 Refrigerators and combination refrigerator-freezers CSA C300-12 CSA C300-12, Table 1 On or after February 3, 1995 and before September 15, 2014 2 Refrigerators and combination refrigerator-freezers CSA C300-15 CSA C300-15, Table 1 On or after September 15, 2014

For the purpose of subsection 5(1) of the Act, the following information must be provided to the Minister in respect of a refrigerator or combination refrigerator-freezer:

The information must be collected in accordance with one of the following standards:

A freezer is prescribed as an energy-using product.

However, for the purposes of sections 4, 5, 13 to 15 and 49, a freezer is not considered to be an energy-using product unless it is manufactured on or after February 3, 1995.

The energy efficiency standards set out in column 3 of the table to this section apply to freezers described in column 1 that are manufactured during the periods set out in column 4.

A freezer complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 2 that are applicable to a freezer as defined in section 45. TABLE Item Column 1 Column 2 Column 3 Column 4 Energy-using Product Testing Standard Energy Efficiency Standard Period of Manufacture 1 Freezers CSA C300-12 CSA C300-12, Table 1 On or after February 3, 1995 and before September 15, 2014 2 Freezers CSA C300-15 CSA C300-15, Table 1 On or after September 15, 2014

For the purpose of subsection 5(1) of the Act, the following information must be provided to the Minister in respect of a freezer:

The information must be collected in accordance with one of the following standards:

An electric range is prescribed as an energy-using product.

However, for the purposes of sections 4, 5, 13 to 15 and 55, an electric range is not considered to be an energy-using product unless it is manufactured on or after February 3, 1995.

The energy efficiency standards set out in column 2 of the table to this section apply to electric ranges described in column 1 that are manufactured during the periods set out in column 3.

An electric range complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by CSA C358-03 that are applicable to an electric range as defined in section 51. TABLE Column 1 Column 2 Column 3 Item Energy-using Product Energy Efficiency Standard Period of Manufacture 1 Electric ranges that have at least one surface element and at least one oven E ≤ 0.93 V + 14.3 On or after February 3, 1995 and before August 1, 2003 2 Electric ranges that have at least one surface element and at least one oven CSA C358-03, clause 8(a) On or after August 1, 2003 3 Electric ranges that have at least one oven but no surface elements E ≤ 38 On or after February 3, 1995 and before August 1, 2003 4 Electric ranges that have at least one oven but no surface elements CSA C358-03, clause 8(c) On or after August 1, 2003 5 Electric ranges that are counter-mounted and have at least one surface element on a conventional cooking top but have no oven E ≤ 34 On or after February 3, 1995 and before August 1, 2003 6 Electric ranges that are counter-mounted and have at least one surface element on a modular cooking top but have no oven E ≤ 43 On or after February 3, 1995 and before August 1, 2003 7 Electric ranges that are counter-mounted and have at least one surface element but have no oven CSA C358-03, clause 8(b) On or after August 1, 2003

A gas range is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 59, a gas range is not considered to be an energy-using product unless it is manufactured on or after February 3, 1995.

A dehumidifier is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 63, a dehumidifier is not considered to be an energy-using product unless

The energy efficiency standards set out in column 3 of the table to this section apply to dehumidifiers described in column 1 that are manufactured during the periods set out in column 4.

A dehumidifier complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 2 that are applicable to a dehumidifier as defined in section 61. TABLE Column 1 Column 2 Column 3 Column 4 Item Energy-using Product Testing Standard Energy Efficiency Standard Period of Manufacture 1 Dehumidifiers CSA C749-94 CSA C749-94, clause 4.2 On or after December 31, 1998 and before October 1, 2007 2 Dehumidifiers CSA C749-07 CSA C749-07, Table 1 On or after October 1, 2007 and before October 1, 2012 3 Dehumidifiers CSA C749-07 CSA C749-07, Table 1B On or after October 1, 2012 and before June 13, 2019 4 Portable dehumidifiers 10 C.F.R. Appendix X1 Minimum integrated energy factor applicable, based on product’s capacity, as set out in 10 C.F.R. §430.32(v)(2) On or after June 13, 2019 5 Whole-home dehumidifiers 10 C.F.R. Appendix X1 Minimum integrated energy factor applicable, based on product’s case volume, as set out in 10 C.F.R. §430.32(v)(2) On or after June 13, 2019

A microwave oven is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 68, a microwave oven is not considered to be an energy-using product unless it is manufactured on or after March 31, 2019.

The energy efficiency standard for a microwave oven is the standard set out for that type of microwave oven in 10 C.F.R. §430.32(j)(3).

A microwave oven complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by CSA C388-15 or 10 C.F.R. Appendix I that are applicable to a microwave oven as defined in section 65.

A miscellaneous refrigeration product is prescribed as an energy-using product.

However, for the purposes of sections 4, 5, 13 to 15 and 73, a miscellaneous refrigeration product is not considered to be an energy-using product unless

The energy efficiency standards set out in column 3 of the table to this section apply to miscellaneous refrigeration products described in column 1 that are manufactured during the periods set out in column 4.

A miscellaneous refrigeration product complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 2 that are applicable to a miscellaneous refrigeration product as defined in section 70. TABLE Item Column 1 Column 2 Column 3 Column 4 Energy-using Product Testing Standard Energy Efficiency Standard Period of Manufacture 1 Miscellaneous refrigeration products CSA C300-12 CSA C300-12, Table 1 On or after January 1, 2008 and before September 15, 2014 2 Miscellaneous refrigeration products CSA C300-15 CSA C300-15, Table 1 On or after September 15, 2014 and before October 28, 2019 3 Miscellaneous refrigeration products – coolers 10 C.F.R. Appendix A 10 C.F.R. §430.32(aa)(1) On or after October 28, 2019 4 Miscellaneous refrigeration products – combination cooler refrigeration products 10 C.F.R. Appendix A 10 C.F.R. §430.32(aa)(2) On or after October 28, 2019

For the purpose of subsection 5(1) of the Act, the following information must be provided to the Minister in respect of a miscellaneous refrigeration product:

The information must be collected in accordance with one of the following standards:

A ceiling fan is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 78, a ceiling fan is not considered to be an energy-using product unless it is manufactured on or after January 21, 2020.

The energy efficiency standard for a ceiling fan is the standard as set out in 10 C.F.R. §430.32(s)(2)(i).

A ceiling fan complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by 10 C.F.R. Appendix U that are applicable to a ceiling fan as defined in section 75.

A room air conditioner is prescribed as an energy-using product.

However, for the purposes of sections 4, 5, 112, 114 and 115, a room air conditioner is not considered to be an energy-using product unless it is manufactured on or after February 3, 1995.

The energy efficiency standards set out in column 2 of the table to this section apply to room air conditioners that are manufactured during the periods set out in column 3.

A room air conditioner complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 1 that are applicable to a room air conditioner as defined in section 108. TABLE Column 1 Column 2 Column 3 Item Testing Standard Energy Efficiency Standard Period of Manufacture 1 CSA C368.1 CSA C368.1, Table 2, second column On or after February 3, 1995 and before June 1, 2014 2 Part 1 of TSD D2SA001 Part 2 of TSD D2SA001 On or after June 1, 2014

A large air conditioner is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 118, a large air conditioner is not considered to be an energy-using product unless

The energy efficiency standards set out in column 3 of Table 1 to this section apply to large air conditioners that are cooled by air and described in column 1 and that are manufactured during the period set out in column 4.

The energy efficiency standards set out in column 3 of Table 2 to this section apply to large air conditioners that are cooled by water and described in column 1 and that are manufactured during the period set out in column 4.

The energy efficiency standards set out in column 3 of Table 3 to this section apply to large air conditioners that are cooled by evaporation and described in column 1 and that are manufactured during the period set out in column 4.

A large air conditioner complies with the energy efficiency standard set out in column 3 if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 2 that are applicable to a large air conditioner as defined in section 116. TABLE 1 Column 1 Column 2 Column 3 Column 4 Item Energy-using Product Testing Standard Energy Efficiency Standard Period of Manufacture 1 Large air conditioners that have a cooling capacity of ≥ 19 kW and < 40 kW and either without a heating section or with an electric heating section CSA C746-98 Energy efficiency ratio ≥ 10.3 On or after December 31, 1998 and before January 1, 2010 2 Large air conditioners that have a cooling capacity of ≥ 19 kW and < 40 kW and either without a heating section or with an electric heating section On or after January 1, 2010 and before January 1, 2018 3 Large air conditioners that have a cooling capacity of ≥ 19 kW and < 40 kW and either without a heating section or with an electric heating section CSA C746-17 On or after January 1, 2018 and before January 1, 2026 4 Large air conditioners that have a cooling capacity of ≥ 19 kW and < 40 kW and either without a heating section or with an electric heating section CSA C746-17 or 10 C.F.R. Appendix A On or after January 1, 2026 5 Large air conditioners that have a cooling capacity of ≥ 40 kW and < 70 kW and either without a heating section or with an electric heating section CSA C746-98 Energy efficiency ratio ≥ 9.7 On or after December 31, 1998 and before January 1, 2010 6 Large air conditioners that have a cooling capacity of ≥ 40 kW and < 70 kW and either without a heating section or with an electric heating section On or after January 1, 2010 and before January 1, 2018 7 Large air conditioners that have a cooling capacity of ≥ 40 kW and < 70 kW and either without a heating section or with an electric heating section CSA C746-17 On or after January 1, 2018 and before January 1, 2026 8 Large air conditioners that have a cooling capacity of ≥ 40 kW and < 70 kW and either without a heating section or with an electric heating section CSA C746-17 or 10 C.F.R. Appendix A On or after January 1, 2026 9 Large air conditioners that have a cooling capacity of ≥ 70 kW and < 223 kW and either without a heating section or with an electric heating section On or after January 1, 2010 and before January 1, 2018 10 Large air conditioners that have a cooling capacity of ≥ 70 kW and < 223 kW and either without a heating section or with an electric heating section CSA C746-17 On or after January 1, 2018 and before January 1, 2026 11 Large air conditioners that have a cooling capacity of ≥ 70 kW and < 223 kW and either without a heating section or with an electric heating section CSA C746-17 or 10 C.F.R. Appendix A On or after January 1, 2026 12 Large air conditioners that have a cooling capacity of ≥ 19 kW and < 40 kW and a heating section other than an electric heating section CSA C746-98 Energy efficiency ratio ≥ 10.1 On or after December 31, 1998 and before January 1, 2010 13 Large air conditioners that have a cooling capacity of ≥ 19 kW and < 40 kW and a heating section other than an electric heating section On or after January 1, 2010 and before January 1, 2018 14 Large air conditioners that have a cooling capacity of ≥ 19 kW and < 40 kW and a heating section other than an electric heating section CSA C746-17 On or after January 1, 2018 and before January 1, 2026 15 Large air conditioners that have a cooling capacity of ≥ 19 kW and < 40 kW and a heating section other than an electric heating section CSA C746-17 or 10 C.F.R. Appendix A On or after January 1, 2026 16 Large air conditioners that have a cooling capacity of ≥ 40 kW and < 70 kW and a heating section other than an electric heating section CSA C746-98 Energy efficiency ratio ≥ 9.5 On or after December 31, 1998 and before January 1, 2010 17 Large air conditioners that have a cooling capacity of ≥ 40 kW and < 70 kW and a heating section other than an electric heating section On or after January 1, 2010 and before January 1, 2018 18 Large air conditioners that have a cooling capacity of ≥ 40 kW and < 70 kW and a heating section other than an electric heating section CSA C746-17 On or after January 1, 2018 and before January 1, 2026 19 Large air conditioners that have a cooling capacity of ≥ 40 kW and < 70 kW and a heating section other than an electric heating section CSA C746-17 or 10 C.F.R. Appendix A On or after January 1, 2026 20 Large air conditioners that have a cooling capacity of ≥ 70 kW and < 223 kW and a heating section other than an electric heating section On or after January 1, 2010 and before January 1, 2018 21 Large air conditioners that have a cooling capacity of ≥ 70 kW and < 223 kW and a heating section other than an electric heating section CSA C746-17 On or after January 1, 2018 and before January 1, 2026 22 Large air conditioners that have a cooling capacity of ≥ 70 kW and < 223 kW and a heating section other than an electric heating section CSA C746-17 or 10 C.F.R. Appendix A On or after January 1, 2026 TABLE 2 Column 1 Column 2 Column 3 Column 4 Item Energy-using Product Testing Standard Energy Efficiency Standard Period of Manufacture 1 Large air conditioners that have a cooling capacity of ≥ 19 kW and < 40 kW and either without a heating section or with an electric heating section CSA C746-98 Energy efficiency ratio ≥ 11.5 On or after December 31, 1998 and before January 1, 2010 2 Large air conditioners that have a cooling capacity of ≥ 19 kW and < 40 kW and either without a heating section or with an electric heating section On or after January 1, 2010 and before January 1, 2018 3 Large air conditioners that have a cooling capacity of ≥ 19 kW and < 40 kW and either without a heating section or with an electric heating section CSA C746-17 On or after January 1, 2018 4 Large air conditioners that have a cooling capacity of ≥ 40 kW and < 70 kW and either without a heating section or with an electric heating section CSA C746-98 Energy efficiency ratio ≥ 11.0 On or after December 31, 1998 and before January 1, 2010 5 Large air conditioners that have a cooling capacity of ≥ 40 kW and < 70 kW and either without a heating section or with an electric heating section On or after January 1, 2010 and before January 1, 2018 6 Large air conditioners that have a cooling capacity of ≥ 40 kW and < 70 kW and either without a heating section or with an electric heating section CSA C746-17 On or after January 1, 2018 7 Large air conditioners that have a cooling capacity of ≥ 19 kW and < 40 kW and a heating section other than an electric heating section CSA C746-98 Energy efficiency ratio ≥ 11.3 On or after December 31, 1998 and before January 1, 2010 8 Large air conditioners that have a cooling capacity of ≥ 19 kW and < 40 kW and a heating section other than an electric heating section On or after January 1, 2010 and before January 1, 2018 9 Large air conditioners that have a cooling capacity of ≥ 19 kW and < 40 kW and a heating section other than an electric heating section CSA C746-17 On or after January 1, 2018 10 Large air conditioners that have a cooling capacity of ≥ 40 kW and < 70 kW and a heating section other than an electric heating section CSA C746-98 Energy efficiency ratio ≥ 10.8 On or after December 31, 1998 and before January 1, 2010 11 Large air conditioners that have a cooling capacity of ≥ 40 kW and < 70 kW and a heating section other than an electric heating section On or after January 1, 2010 and before January 1, 2018 12 Large air conditioners that have a cooling capacity of ≥ 40 kW and < 70 kW and a heating section other than an electric heating section CSA C746-17 On or after January 1, 2018 13 Large air conditioners that have a cooling capacity of ≥ 70 kW and < 223 kW and either without a heating section or with an electric heating section On or after January 1, 2010 and before January 1, 2018 14 Large air conditioners that have a cooling capacity of ≥ 70 kW and < 223 kW and either without a heating section or with an electric heating section CSA C746-17 On or after January 1, 2018 15 Large air conditioners that have a cooling capacity of ≥ 70 kW and < 223 kW and a heating section other than an electric heating section On or after January 1, 2010 and before January 1, 2018 16 Large air conditioners that have a cooling capacity of ≥ 70 kW and < 223 kW and a heating section other than an electric heating section CSA C746-17 On or after January 1, 2018 TABLE 3 Column 1 Column 2 Column 3 Column 4 Item Energy-using Product Testing Standard Energy Efficiency Standard Period of Manufacture 1 Large air conditioners that have a cooling capacity of ≥ 19 kW and < 40 kW and either without a heating section or with an electric heating section CSA C746-98 Energy efficiency ratio ≥ 11.5 On or after December 31, 1998 and before January 1, 2010 2 Large air conditioners that have a cooling capacity of ≥ 19 kW and < 40 kW and either without a heating section or with an electric heating section On or after January 1, 2010 and before January 1, 2018 3 Large air conditioners that have a cooling capacity of ≥ 19 kW and < 40 kW and either without a heating section or with an electric heating section CSA C746-17 On or after January 1, 2018 4 Large air conditioners that have a cooling capacity of ≥ 40 kW and < 70 kW and either without a heating section or with an electric heating section CSA C746-98 Energy efficiency ratio ≥ 11.0 On or after December 31, 1998 and before January 1, 2010 5 Large air conditioners that have a cooling capacity of ≥ 40 kW and < 70 kW and either without a heating section or with an electric heating section On or after January 1, 2010 and before January 1, 2018 6 Large air conditioners that have a cooling capacity of ≥ 40 kW and < 70 kW and either without a heating section or with an electric heating section CSA C746-17 On or after January 1, 2018 7 Large air conditioners that have a cooling capacity of ≥ 19 kW and < 40 kW and a heating section other than an electric heating section CSA C746-98 Energy efficiency ratio ≥ 11.3 On or after December 31, 1998 and before January 1, 2010 8 Large air conditioners that have a cooling capacity of ≥ 19 kW and < 40 kW and a heating section other than an electric heating section On or after January 1, 2010 and before January 1, 2018 9 Large air conditioners that have a cooling capacity of ≥ 19 kW and < 40 kW and a heating section other than an electric heating section CSA C746-17 On or after January 1, 2018 10 Large air conditioners that have a cooling capacity of ≥ 40 kW and < 70 kW and a heating section other than an electric heating section CSA C746-98 Energy efficiency ratio ≥ 10.8 On or after December 31, 1998 and before January 1, 2010 11 Large air conditioners that have a cooling capacity of ≥ 40 kW and < 70 kW and a heating section other than an electric heating section On or after January 1, 2010 and before January 1, 2018 12 Large air conditioners that have a cooling capacity of ≥ 40 kW and < 70 kW and a heating section other than an electric heating section CSA C746-17 On or after January 1, 2018 13 Large air conditioners that have a cooling capacity of ≥ 70 kW and < 223 kW and either without a heating section or with an electric heating section On or after January 1, 2010 and before January 1, 2018 14 Large air conditioners that have a cooling capacity of ≥ 70 kW and < 223 kW and either without a heating section or with an electric heating section CSA C746-17 On or after January 1, 2018 15 Large air conditioners that have a cooling capacity of ≥ 70 kW and < 223 kW and a heating section other than an electric heating section On or after January 1, 2010 and before January 1, 2018 16 Large air conditioners that have a cooling capacity of ≥ 70 kW and < 223 kW and a heating section other than an electric heating section CSA C746-17 On or after January 1, 2018

A packaged terminal air conditioner is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 122, a packaged terminal air conditioner is not considered to be an energy-using product unless it is manufactured on or after December 31, 1998.

The energy efficiency standards set out in column 2 of the table to this section apply to packaged terminal air conditioners that are manufactured during the periods set out in column 3.

A packaged terminal air conditioner complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 1 that are applicable to a packaged terminal air conditioner as defined in section 120. TABLE Column 1 Column 2 Column 3 Item Testing Standard Energy Efficiency Standard Period of Manufacture 1 CSA C744-04 CSA C744-04, Table 2 On or after December 31, 1998 and before September 30, 2012 2 CSA C744-14 CSA C744-14, Table 2 On or after September 30, 2012 and before January 1, 2017 3 CSA C744-17 CSA C744-17, Table 2 On or after January 1, 2017

For the purpose of subsection 5(1) of the Act, the following information must be provided to the Minister in respect of a packaged terminal air conditioner:

The information must be collected in accordance with

A single package central air conditioner is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 126, a single package central air conditioner is not considered to be an energy-using product unless it is manufactured on or after February 3, 1995.

The energy efficiency standards set out in column 3 of Table 1 to this section apply to single-phase single package central air conditioners described in column 1 that are manufactured during the periods set out in column 4.

The energy efficiency standards set out in column 3 of Table 2 to this section apply to three-phase single package central air conditioners described in column 1 that are manufactured during the periods set out in column 4.

A single package central air conditioner complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 2 that are applicable to a single package central air conditioner as defined in section 124. TABLE 1 Column 1 Column 2 Column 3 Column 4 Item Energy-using Product Testing Standard Energy Efficiency Standard Period of Manufacture 1 Single package central air conditioners, other than those that are through-the-wall or small-duct and high-velocity On or after February 3, 1995 and before January 1, 2023 2 Single package central air conditioners that are through-the-wall On or after February 3, 1995 and before January 1, 2023 3 Single package central air conditioners that are small-duct and high-velocity On or after February 3, 1995 and before January 1, 2023 4 Single package central air conditioners, other than those that are space-constrained 10 C.F.R. Appendix M1 On or after January 1, 2023 5 Single package central air conditioners that are space-constrained 10 C.F.R. Appendix M1 On or after January 1, 2023 TABLE 2 Column 1 Column 2 Column 3 Column 4 Item Energy-using Product Testing Standard Energy Efficiency Standard Period of Manufacture 1 Single package central air conditioners, other than those that are through-the-wall, or small-duct and high-velocity CSA C656-14 Seasonal energy efficiency ratio ≥ 14.0 On or after February 3, 1995 and before January 1, 2023 2 Single package central air conditioners, other than those that are space-constrained CSA C656-14 Seasonal energy efficiency ratio ≥ 14.0 On or after January 1, 2023 and before January 1, 2026 3 Single package central air conditioners, other than those that are space-constrained 10 C.F.R. Appendix F1 Seasonal energy efficiency ratio 2 ≥ 13.4 On or after January 1, 2026 4 Single package central air conditioners that are through-the-wall CSA C656-05 Seasonal energy efficiency ratio ≥ 12.0 On or after February 3, 1995 and before January 1, 2023 5 Single package central air conditioners that are space-constrained CSA C656-14 Seasonal energy efficiency ratio ≥ 12.0 On or after January 1, 2023 and before January 1, 2026 6 Single package central air conditioners that are space-constrained 10 C.F.R. Appendix F1 Seasonal energy efficiency ratio 2 ≥ 13.9 On or after January 1, 2026 7 Single package central air conditioners that are small-duct and high-velocity CSA C656-14 Seasonal energy efficiency ratio ≥ 12.0 On or after January 1, 2017 and before January 1, 2023

A single package vertical air conditioner is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 130, a single package vertical air conditioner is not considered to be an energy-using product unless it is manufactured on or after January 1, 2011 and has a cooling capacity of less than 70 kW (240,000 Btu/h).

The energy efficiency standards set out in column 2 of the table to this section apply to single package vertical air conditioners described in column 1 that are manufactured during the periods set out in column 3.

A single package vertical air conditioner complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by CSA C746-17 that are applicable to a single package vertical air conditioner as defined in section 128. TABLE Item Column 1 Column 2 Column 3 Energy-using Product Energy Efficiency Standard Period of Manufacture 1 Single package vertical air conditioners that have a cooling capacity of < 19 kW (65,000 Btu/h) Energy efficiency ratio ≥ 9.0 On or after January 1, 2011 and before September 23, 2019 2 Single package vertical air conditioners that have a cooling capacity of < 19 kW (65,000 Btu/h) Energy efficiency ratio ≥ 11.0 On or after September 23, 2019 3 Single package vertical air conditioners that have a cooling capacity of ≥ 19 kW (65,000 Btu/h) and < 39.5 kW (135,000 Btu/h) Energy efficiency ratio ≥ 8.9 On or after January 1, 2011 and before October 9, 2015 4 Single package vertical air conditioners that have a cooling capacity of ≥ 19 kW (65,000 Btu/h) and < 39.5 kW (135,000 Btu/h) Energy efficiency ratio ≥ 10.0 On or after October 9, 2015 5 Single package vertical air conditioners that have a cooling capacity of ≥ 39.5 kW (135,000 Btu/h) and < 70 kW (240,000 Btu/h) Energy efficiency ratio ≥ 8.6 On or after January 1, 2011 and before October 9, 2016 6 Single package vertical air conditioners that have a cooling capacity of ≥ 39.5 kW (135,000 Btu/h) and < 70 kW (240,000 Btu/h) Energy efficiency ratio ≥ 10.0 On or after October 9, 2016

A split system central air conditioner is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 134, a split system central air conditioner is not considered to be an energy-using product unless it is manufactured on or after February 3, 1995.

The energy efficiency standards set out in column 3 of Table 1 to this section apply to single-phase split system central air conditioners described in column 1 that are manufactured during the periods set out in column 4.

The energy efficiency standards set out in column 3 of Table 2 to this section apply to three-phase split system central air conditioners described in column 1 that are manufactured during the periods set out in column 4.

A split system central air conditioner complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 2 that are applicable to a split system central air conditioner as defined in section 132. TABLE 1 Column 1 Column 2 Column 3 Column 4 Item Energy-using Product Testing Standard Energy Efficiency Standard Period of Manufacture 1 Split system central air conditioners, other than those that are small-duct and high-velocity On or after February 3, 1995 and before January 1, 2023 2 Split system central air conditioners that are small-duct and high-velocity On or after February 3, 1995 and before January 1, 2023 3 Split system central air conditioners, other than those that are space-constrained or small-duct and high-velocity 10 C.F.R. Appendix M1 On or after January 1, 2023 4 Split system central air conditioners that are small-duct and high-velocity 10 C.F.R. Appendix M1 On or after January 1, 2023 5 Split system central air conditioners that are space-constrained 10 C.F.R. Appendix M1 On or after January 1, 2023 TABLE 2 Column 1 Column 2 Column 3 Column 4 Item Energy-using Product Testing Standard Energy Efficiency Standard Period of Manufacture 1 Split system central air conditioners, other than those that are small-duct and high-velocity CSA C656-14 Seasonal energy efficiency ratio ≥ 13.0 On or after February 3, 1995 and before January 1, 2026 2 Split system central air conditioners, other than those that are space-constrained or small-duct and high-velocity 10 C.F.R. Appendix F1 Seasonal energy efficiency ratio 2 ≥ 13.4 On or after January 1, 2026 3 Split system central air conditioners that are small-duct and high-velocity CSA C656-14 Seasonal energy efficiency ratio ≥ 12.0 On or after February 3, 1995 and before January 1, 2026 4 Split system central air conditioners that are small-duct and high-velocity 10 C.F.R. Appendix F1 Seasonal energy efficiency ratio 2 ≥ 13.0 On or after January 1, 2026 5 Split system central air conditioners that are space-constrained 10 C.F.R. Appendix F1 Seasonal energy efficiency ratio 2 ≥ 12.7 On or after January 1, 2026

A large condensing unit is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 138, a large condensing unit is not considered to be an energy-using product unless it is manufactured on or after December 31, 1998.

The energy efficiency standards set out in column 2 of the table to this section apply to large condensing units described in column 1.

A large condensing unit complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by CSA C746-98 that are applicable to a large condensing unit as defined in section 136. TABLE Column 1 Column 2 Item Energy-using Product Energy Efficiency Standard 1 Large condensing units that are cooled by air Energy efficiency ratio ≥ 10.1 2 Large condensing units that are cooled by water or evaporation Energy efficiency ratio ≥ 13.1

A chiller is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 142, a chiller is not considered to be an energy-using product unless it has an integral refrigerant condenser and is manufactured on or after October 28, 2004.

The energy efficiency standards set out in column 2 of the table to this section apply to chillers that are manufactured during the periods set out in column 3.

A chiller complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 1 that are applicable to a chiller as defined in section 140. TABLE Column 1 Column 2 Column 3 Item Testing Standard Energy Efficiency Standard Period of Manufacture 1 CSA C743-02 CSA C743-02, Tables 9 to 15 On or after October 28, 2004 and before January 1, 2017 2 CSA C743-09 Product’s coefficient of performance and integrated part-load value must meet those applicable to the product in CSA C743-09, Path A or Path B, Table 10 On or after January 1, 2017 and before December 31, 2019 3 ASHRAE 90.1-16, table 6.8.1-3, column 6 Product’s coefficient of performance and integrated part-load value must meet those applicable to the product in ASHRAE 90.1-16, Path A or Path B, Table 6.8.1-3 On or after December 31, 2019

A portable air conditioner is prescribed as an energy-using product.

However, a portable air conditioner is not considered to be an energy-using product

The energy efficiency standard applicable to a portable air conditioner is that it must have a CEER equal to or greater than the result determined by the formula 1.04 A ÷ (3.7117 A 0.6384) where A is its SACC, expressed in Btu/h.

A portable air conditioner complies with the energy efficiency standard if it meets that standard when tested in accordance with the applicable testing procedures established by 10 C.F.R. Appendix CC.

For the purpose of subsection 5(1) of the Act, the following information must be collected in accordance with 10 C.F.R. Appendix CC and provided to the Minister in respect of a portable air conditioner:

For a product with multiple duct configuration options, the information required by paragraphs 1(a) and (b) must be provided for both applicable duct configurations.

A ground-source heat pump is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 189, a ground-source heat pump is not considered to be an energy-using product unless it is manufactured on or after February 3, 1995.

The energy efficiency standards set out in column 2 of the table to this section apply to ground-source heat pumps that are manufactured during the periods set out in column 3.

A ground source heat pump complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 1 that are applicable to a ground source heat pump as defined in section 187. TABLE Column 1 Column 2 Column 3 Item Testing Standard Energy Efficiency Standard Period of Manufacture 1 CSA C446-94 CSA C446-94, Table 2 On or after February 3, 1995 and before June 1, 2006 2 CSA C13256-1 On or after June 1, 2006

For the purpose of subsection 5(1) of the Act, the following information must be provided to the Minister in respect of a ground-source heat pump:

The information must be collected in accordance with

An internal water loop heat pump is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 193, an internal water loop heat pump is not considered to be an energy-using product unless it is manufactured on or after February 3, 1995.

The energy efficiency standards set out in column 2 of the table to this section apply to internal water loop heat pumps described in column 1.

An internal water loop heat pump complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by CSA C13256-1 that are applicable to an internal water loop heat pump as defined in section 191. TABLE Column 1 Column 2 Item Energy-using Product Energy Efficiency Standard 1 Internal water loop heat pumps that have a cooling capacity of < 5 kW 2 Internal water loop heat pumps that have a cooling capacity of ≥ 5 kW but ≤ 40 kW

A large heat pump is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 197, a large heat pump is not considered to be an energy-using product unless

The energy efficiency standards set out in column 3 of Table 1 to this section apply to large heat pumps described in column 1 that are manufactured during the periods set out in column 4 and that have no heating section or have an electric heating section.

The energy efficiency standards set out in column 3 of Table 2 to this section apply to large heat pumps described in column 1 that are manufactured during the periods set out in column 4 and that have a heating section other than an electric heating section.

A large heat pump complies with the energy efficiency standard set out in column 3 if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 2 that are applicable to a large heat pump as defined in section 195. TABLE 1 Column 1 Column 2 Column 3 Column 4 Item Energy-using Product Testing Standard Energy Efficiency Standard Period of Manufacture 1 Large heat pumps that have a cooling capacity of ≥ 19 kW and < 40 kW CSA C746-98 On or after December 31, 1998 and before January 1, 2010 2 Large heat pumps that have a cooling capacity of ≥ 19 kW and < 40 kW On or after January 1, 2010 and before January 1, 2018 3 Large heat pumps that have a cooling capacity of ≥ 19 kW and < 40 kW CSA C746-17 On or after January 1, 2018 and before January 1, 2026 4 Large heat pumps that have a cooling capacity of ≥ 19 kW and < 40 kW CSA C746-17 or 10 C.F.R. Appendix A On or after January 1, 2026 5 Large heat pumps that have a cooling capacity of ≥ 40 kW and < 70 kW CSA C746-98 On or after December 31, 1998 and before January 1, 2010 6 Large heat pumps that have a cooling capacity of ≥ 40 kW and < 70 kW On or after January 1, 2010 and before January 1, 2018 7 Large heat pumps that have a cooling capacity of ≥ 40 kW and < 70 kW CSA C746-17 On or after January 1, 2018 and before January 1, 2026 8 Large heat pumps that have a cooling capacity of ≥ 40 kW and < 70 kW CSA C746-17 or 10 C.F.R. Appendix A On or after January 1, 2026 9 Large heat pumps that have a cooling capacity of ≥ 70 kW and < 223 kW On or after January 1, 2010 and before January 1, 2018 10 Large heat pumps that have a cooling capacity of ≥ 70 kW and < 223 kW CSA C746-17 On or after January 1, 2018 and before January 1, 2026 11 Large heat pumps that have a cooling capacity of ≥ 70 kW and < 223 kW CSA C746-17 or 10 C.F.R. Appendix A On or after January 1, 2026 TABLE 2 Column 1 Column 2 Column 3 Column 4 Item Energy-using Product Testing Standard Energy Efficiency Standard Period of Manufacture 1 Large heat pumps that have a cooling capacity of ≥ 19 kW and < 40 kW CSA C746-98 On or after December 31, 1998 and before January 1, 2010 2 Large heat pumps that have a cooling capacity of ≥ 19 kW and < 40 kW On or after January 1, 2010 and before January 1, 2018 3 Large heat pumps that have a cooling capacity of ≥ 19 kW and < 40 kW CSA C746-17 On or after January 1, 2018 and before January 1, 2026 4 Large heat pumps that have a cooling capacity of ≥ 19 kW and < 40 kW CSA C746-17 or 10 C.F.R. Appendix A On or after January 1, 2026 5 Large heat pumps that have a cooling capacity of ≥ 40 kW and < 70 kW CSA C746-98 On or after December 31, 1998 and before January 1, 2010 6 Large heat pumps that have a cooling capacity of ≥ 40 kW and < 70 kW On or after January 1, 2010 and before January 1, 2018 7 Large heat pumps that have a cooling capacity of ≥ 40 kW and < 70 kW CSA C746-17 On or after January 1, 2018 and before January 1, 2026 8 Large heat pumps that have a cooling capacity of ≥ 40 kW and < 70 kW CSA C746-17 or 10 C.F.R. Appendix A On or after January 1, 2026 9 Large heat pumps that have a cooling capacity of ≥ 70 kW and < 223 kW On or after January 1, 2010 and before January 1, 2018 10 Large heat pumps that have a cooling capacity of ≥ 70 kW and < 223 kW CSA C746-17 On or after January 1, 2018 and before January 1, 2026 11 Large heat pumps that have a cooling capacity of ≥ 70 kW and < 223 kW CSA C746-17 or 10 C.F.R. Appendix A On or after January 1, 2026

A packaged terminal heat pump is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 201, a packaged terminal heat pump is not considered to be an energy-using product unless it is manufactured on or after December 31, 1998.

The energy efficiency standards set out in column 2 of the table to this section apply to packaged terminal heat pumps that are manufactured during the periods set out in column 3.

A packaged terminal heat pump complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 1 that are applicable to a packaged terminal heat pump as defined in section 199. TABLE Column 1 Column 2 Column 3 Item Testing Standard Energy Efficiency Standard Period of Manufacture 1 CSA C744-04 CSA C744-04, Table 2 On or after December 31, 1998 and before September 30, 2012 2 CSA C744-17 CSA C744-17, Table 2 On or after September 30, 2012

For the purpose of subsection 5(1) of the Act, the following information must be provided to the Minister in respect of a packaged terminal heat pump:

The information must be collected in accordance with

A single package central heat pump is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 205, a single package central heat pump is not considered to be an energy-using product unless it is manufactured on or after February 3, 1995.

The energy efficiency standards set out in column 3 of Table 1 to this section apply to single-phase single package central heat pumps described in column 1 that are manufactured during the periods set out in column 4.

The energy efficiency standards set out in column 3 of Table 2 to this section apply to three-phase single package central heat pumps described in column 1 that are manufactured during the periods set out in column 4.

A single package central heat pump complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 2 that are applicable to a single package central heat pump as defined in section 203. TABLE 1 Column 1 Column 2 Column 3 Column 4 Item Energy-using Product Testing Standard Energy Efficiency Standard Period of Manufacture 1 Single package central heat pumps, other than those that are through-the-wall or small-duct and high-velocity On or after February 3, 1995 and before January 1, 2023 2 Single package central heat pumps that are through-the-wall On or after February 3, 1995 and before January 1, 2023 3 Single package central heat pumps that are small-duct and high-velocity On or after February 3, 1995 and before January 1, 2023 4 Single package central heat pumps, other than those that are space-constrained 10 C.F.R. Appendix M1 On or after January 1, 2023 and before January 1, 2025 5 Single package central heat pumps that are space-constrained 10 C.F.R. Appendix M1 On or after January 1, 2023 and before January 1, 2025 6 Single package central heat pumps, other than those that are space-constrained 10 C.F.R. Appendix M1, except that the very low temperature heating test (H4) must be conducted On or after January 1, 2025 7 Single package central heat pumps that are space-constrained 10 C.F.R. Appendix M1, except that the very low temperature heating test (H4) must be conducted On or after January 1, 2025 TABLE 2 Column 1 Column 2 Column 3 Column 4 Item Energy-using Product Testing Standard Energy Efficiency Standard Period of Manufacture 1 Single package central heat pumps, other than those that are through-the-wall or small-duct and high-velocity CSA C656-14 On or after February 3, 1995 and before January 1, 2023 2 Single package central heat pumps that are through-the-wall CSA C656-05 On or after February 3, 1995 and before January 1, 2023 3 Single package central heat pumps that are small-duct and high-velocity CSA C656-14 On or after February 3, 1995 and before January 1, 2023 4 Single package central heat pumps, other than those that are space-constrained CSA C656-14 On or after January 1, 2023 and before January 1, 2026 5 Single package central heat pumps that are space-constrained CSA C656-14 On or after January 1, 2023 and before January 1, 2026 6 Single package central heat pumps, other than those that are space-constrained 10 C.F.R. Appendix F1, except that the very low temperature heating test (H4) must be conducted On or after January 1, 2026 7 Single package central heat pumps that are space-constrained 10 C.F.R. Appendix F1, except that the very low temperature heating test (H4) must be conducted On or after January 1, 2026

A single package vertical heat pump is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 209, a single package vertical heat pump is not considered to be an energy-using product unless it is manufactured on or after January 1, 2011 and has a cooling capacity of less than 70 kW (240,000 Btu/h).

The energy efficiency standards set out in column 2 of the table to this section apply to single package vertical heat pumps described in column 1 that are manufactured during the periods set out in column 3.

A single package vertical heat pump complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by CSA C746-17 that are applicable to a single package vertical heat pump as defined in section 207. TABLE Item Column 1 Column 2 Column 3 Energy-using Product Energy Efficiency Standard Period of manufacture 1 Single package vertical heat pumps that have a cooling capacity of < 19 kW (65,000 Btu/h) On or after January 1, 2011 and before September 23, 2019 2 Single package vertical heat pumps that have a cooling capacity of < 19 kW (65,000 Btu/h) On or after September 23, 2019 3 Single package vertical heat pumps that have a cooling capacity of ≥ 19 kW (65,000 Btu/h) and < 39.5 kW (135,000 Btu/h) On or after January 1, 2011 and before October 9, 2015 4 Single package vertical heat pumps that have a cooling capacity of ≥ 19 kW (65,000 Btu/h) and < 39.5 kW (135,000 Btu/h On or after October 9, 2015 5 Single package vertical heat pumps that have a cooling capacity of ≥ 39.5 kW (135,000 Btu/h) and < 70 kW (240,000 Btu/h) On or after January 1, 2011 and before October 9, 2016 6 Single package vertical heat pumps that have a cooling capacity of ≥ 39.5 kW (135,000 Btu/h) and < 70 kW (240,000 Btu/h) On or after October 9, 2016

A split system central heat pump is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 213, a split system central heat pump is not considered to be an energy-using product unless it is manufactured on or after December 31, 1998.

The energy efficiency standards set out in column 3 of Table 1 to this section apply to single-phase split system central heat pumps described in column 1 that are manufactured during the periods set out in column 4.

The energy efficiency standards set out in column 3 of Table 2 to this section apply to three-phase split system central heat pumps described in column 1 that are manufactured during the periods set out in column 4.

A split system central heat pump complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 2 that are applicable to a split system central heat pump as defined in section 211. TABLE 1 Column 1 Column 2 Column 3 Column 4 Item Energy-using Product Testing Standard Energy Efficiency Standard Period of Manufacture 1 Split system central heat pumps, other than those that are small-duct and high-velocity On or after December 31, 1998 and before January 1, 2023 2 Split system central heat pumps that are small-duct and high-velocity On or after December 31, 1998 and before January 1, 2023 3 Split system central heat pumps, other than those that are small-duct and high-velocity or space-constrained 10 C.F.R. Appendix M1 On or after January 1, 2023 and before January 1, 2025 4 Split system central heat pumps that are small-duct and high-velocity 10 C.F.R. Appendix M1 On or after January 1, 2023 and before January 1, 2025 5 Split system central heat pumps that are space-constrained 10 C.F.R. Appendix M1 On or after January 1, 2023 and before January 1, 2025 6 Split system central heat pumps, other than those that are small-duct and high-velocity or space-constrained 10 C.F.R. Appendix M1 with the very low temperature heating test (H4) conducted at -15°C (5°F) On or after January 1, 2025 7 Split system central heat pumps that are small-duct and high-velocity 10 C.F.R. Appendix M1 with the very low temperature heating test (H4) conducted at -15°C (5°F) On or after January 1, 2025 8 Split system central heat pumps that are space-constrained 10 C.F.R. Appendix M1 with the very low temperature heating test (H4) conducted at -15°C (5°F) On or after January 1, 2025 TABLE 2 Column 1 Column 2 Column 3 Column 4 Item Energy-using Product Testing Standard Energy Efficiency Standard Period of Manufacture 1 Split system central heat pumps, other than those that are small-duct and high-velocity CSA C656-14 On or after December 31, 1998 and before January 1, 2026 2 Split system central heat pumps that are small-duct and high-velocity CSA C656-14 On or after December 31, 1998 and before January 1, 2026 3 Split system central heat pumps, other than those that are space-constrained or small-duct and high-velocity 10 C.F.R. Appendix F1, except that the very low temperature heating test (H4) must be conducted On or after January 1, 2026 4 Split system central heat pumps that are space-constrained 10 C.F.R. Appendix F1, except that the very low temperature heating test (H4) must be conducted On or after January 1, 2026 5 Split system central heat pumps that are small-duct and high-velocity 10 C.F.R. Appendix F1, except that the very low temperature heating test (H4) must be conducted On or after January 1, 2026

A gas furnace is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 259, a gas furnace is not considered to be an energy-using product if

The energy efficiency standards set out in column 3 of the table to this section apply to gas furnaces described in column 1 that are manufactured during the periods set out in column 4.

A gas furnace complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 2 that are applicable to a gas furnace as defined in section 257. TABLE Column 1 Column 2 Column 3 Column 4 Item Energy-using Product Testing Standard Energy Efficiency Standard Period of Manufacture 1 Gas furnaces that have an input rate of ≤ 65.92 kW (225,000 Btu/h) and use single-phase electric current CSA 2.3 Annual fuel utilization efficiency ≥ 78%On or after February 3, 1995 and before December 31, 2009 2 Gas furnaces that have an input rate of ≤ 65.92 kW (225,000 Btu/h), use single-phase electric current and do not have an integrated cooling component CSA P.2 Annual fuel utilization efficiency ≥ 90%On or after December 31, 2009 and before July 3, 2019 2.1 Gas furnaces, other than gas furnaces for relocatable buildings or replacement non-condensing gas furnaces, that have an input rate of ≤ 65.92 kW (225,000 Btu/h), use single-phase electric current and do not have an integrated cooling component On or after July 3, 2019 3 Gas furnaces that are outdoor furnaces, have an input rate of ≤ 65.92 kW (225,000 Btu/h), use single-phase electric current and have an integrated cooling component CSA P.2 Annual fuel utilization efficiency ≥ 78%On or after December 31, 2009 and before July 3, 2019 3.1 Gas furnaces that are outdoor furnaces, have an input rate of ≤ 65.92 kW (225,000 Btu/h), use single-phase electric current and have an integrated cooling component On or after July 3, 2019 4 Gas furnaces that are through-the-wall, have an input rate of ≤ 65.92 kW (225,000 Btu/h), use single-phase electric current and have an integrated cooling component CSA P.2 Annual fuel utilization efficiency ≥ 78%On or after December 31, 2009 and before December 31, 2012 5 Gas furnaces, other than gas furnaces for relocatable buildings or replacement non-condensing gas furnaces, that are through-the-wall, have an input rate of ≤ 65.92 kW (225,000 Btu/h), use single-phase electric current and have an integrated cooling component CSA P.2 Annual fuel utilization efficiency ≥ 90%On or after December 31, 2012 and before January 1, 2024 5.1 Gas furnaces, other than gas furnaces for relocatable buildings or replacement non-condensing gas furnaces, that are space-constrained, have an input rate of ≤ 65.92 kW (225,000 Btu/h) and have an integrated cooling component CSA P.2 Annual fuel utilization efficiency ≥ 90%On or after January 1, 2024 6 Gas furnaces that have an input rate of ≤ 65.92 kW (225,000 Btu/h) and use three-phase electric current CSA 2.3 On or after February 3, 1995 7 Gas furnaces that have an input rate of > 65.92 kW (225,000 Btu/h) but ≤ 117.23 kW (400,000 Btu/h) CSA 2.3 Thermal efficiency ≥ 80%On or after February 3, 1995 8 Gas furnaces for relocatable buildings On or after July 3, 2019 9 Replacement non-condensing gas furnaces On or after July 3, 2019

An oil-fired furnace is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 263, an oil-fired furnace is not considered to be an energy-using product unless it is manufactured on or after December 31, 1998.

The energy efficiency standards set out in column 2 of the table to this section apply to oil-fired furnaces that are manufactured during the periods set out in column 3.

An oil-fired furnace complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 1 that are applicable to an oil-fired furnace as defined in section 261. TABLE Column 1 Column 2 Column 3 Item Testing Standard Energy Efficiency Standard Period of Manufacture 1 CSA B212 Seasonal energy utilization efficiency ≥ 78%On or after December 31, 1998 and before January 1, 2017 2 CSA P.2 Annual fuel utilization efficiency ≥ 83%On or after January 1, 2017 and before July 3, 2019 3 On or after July 3, 2019

A gas fireplace is prescribed as an energy-using product.

However, a gas fireplace is not considered to be an energy-using product

The energy efficiency standards set out in column 3 of the table to this section apply to gas fireplaces described in column 1 that are manufactured during the periods set out in column 4.

A gas fireplace complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 2 that are applicable to a gas fireplace as defined in section 265. TABLE Item Column 1 Column 2 Column 3 Column 4 Energy-using Product Testing Standard Energy Efficiency Standard Period of Manufacture 1 Decorative gas fireplaces N\A On or after January 1, 2020 2 Heating gas fireplaces CSA P.4.1-15 for fireplace efficiency On or after January 1, 2020

For the purpose of subsection 5(1) of the Act, the following information must be provided to the Minister in respect of a gas fireplace:

The information must be collected in accordance with

A gas-fired unit heater is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 270, a gas-fired unit-heater is not considered to be an energy-using product unless it is manufactured on or after August 8, 2008.

The following energy efficiency standards apply to a gas-fired unit heater:

A gas-fired unit heater complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by CSA P.11 that are applicable to a gas-fired unit heater as defined in section 268.

An electric furnace is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 274, an electric furnace is not considered to be an energy-using product unless it is manufactured on or after July 3, 2019.

The energy efficiency standard that applies to an electric furnace is that its FER must be less than or equal to the FER for product class “Non-Weatherized, Electric Furnace/Modular Blower Fan”, set out in 10 C.F.R. §430.32(y).

An electric furnace complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by 10 C.F.R. Appendix AA that are applicable to an electric furnace as defined in section 272.

An energy-recovery ventilator is prescribed as an energy-using product.

However, for the purposes of sections 4 and 5, an energy-recovery ventilator is not considered to be an energy-using product unless it is manufactured on or after January 1, 2020.

A heat-recovery ventilator is prescribed as an energy-using product.

However, for the purposes of sections 4 and 5, a heat-recovery ventilator is not considered to be an energy-using product unless it is manufactured on or after January 1, 2020.

A gas boiler is prescribed as an energy-using product.

However, a gas boiler is not considered to be an energy-using product

The energy efficiency standards set out in column 3 of Table 1 to this section apply to household gas boilers described in column 1 that are manufactured during the periods set out in column 4.

A household gas boiler complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 2 of Table 1 that are applicable to a gas boiler as defined in section 315.

The energy efficiency standards set out in column 2 of Table 2 to this section apply to commercial gas boilers described in column 1 that are manufactured on or after January 1, 2025.

A commercial gas boiler complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by 10 C.F.R. Appendix A that are applicable to a gas boiler as defined in section 315. TABLE 1 Item Column 1 Column 2 Column 3 Column 4 Energy-using Product Testing Standard Energy Efficiency Standard Period of Manufacture 1 Household gas boilers that are intended for low pressure steam systems CGA P.2 Annual fuel utilization efficiency ≥ 75%On or after December 31, 1998 and before September 1, 2010 2 Household gas boilers that are intended for low pressure steam systems CSA P.2 for annual fuel utilization efficiency On or after September 1, 2010 and before January 15, 2021 2.1 Household gas boilers that are intended for low pressure steam systems CSA P.2 for annual fuel utilization efficiency, standby power and off-mode power On or after January 15, 2021 3 Household gas boilers that are intended for hot water systems CGA P.2 Annual fuel utilization efficiency ≥ 80%On or after December 31, 1998 and before September 1, 2010 4 Household gas boilers that are intended for hot water systems CSA P.2 for annual fuel utilization efficiency On or after September 1, 2010 and before September 1, 2012 5 Household gas boilers that are intended for hot water systems and have tankless domestic water heating coils CSA P.2 for annual fuel utilization efficiency On or after September 1, 2012 and before July 1, 2023 5.1 Household gas boilers that are intended for hot water systems and have tankless domestic water heating coils CSA P.2 for annual fuel utilization efficiency, standby power and off-mode power On or after July 1, 2023 6 Household gas boilers that are intended for hot water systems and do not have tankless domestic water heating coils CSA P.2 for annual fuel utilization efficiency On or after September 1, 2012 and before July 1, 2023 7 Household gas boilers that are intended for hot water systems and do not have tankless domestic water heating coils CSA P.2 for annual fuel utilization efficiency, standby power and off-mode power On or after July 1, 2023 TABLE 2 Item Column 1 Column 2 Energy-using Product Energy Efficiency Standard 1 Commercial gas boilers that have an input rate of ≥ 87.92 kW (300,000 Btu/h) but ≤ 732.68 kW (2,500,000 Btu/h) and are intended for hot water systems Thermal efficiency ≥ 90%2 Commercial gas boilers that have an input rate of > 732.68 kW (2,500,000 Btu/h) but ≤ 2 930.71 kW (10,000,000 Btu/h) and are intended for hot water systems Combustion efficiency ≥ 90%3 Commercial gas boilers that have an input rate of ≥ 87.92 kW (300,000 Btu/h) but ≤ 732.68 kW (2,500,000 Btu/h) and are intended for low pressure steam systems Thermal efficiency ≥ 81%4 Commercial gas boilers that have an input rate of > 732.68 kW (2,500,000 Btu/h) but ≤ 2 930.71 kW (10,000,000 Btu/h) and are intended for low pressure steam systems Thermal efficiency ≥ 82%

An oil-fired boiler is prescribed as an energy-using product.

However, an oil-fired boiler is not considered to be an energy-using product

The energy efficiency standards set out in column 3 of Table 1 to this section apply to household oil-fired boilers described in column 1 that are manufactured during the periods set out in column 4.

A household oil-fired boiler complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 2 of Table 1 that are applicable to an oil-fired boiler as defined in section 319.

The energy efficiency standards set out in column 2 of Table 2 to this section apply to commercial oil-fired boilers described in column 1 that are manufactured on or after January 1, 2025.

A commercial oil-fired boiler complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by 10 C.F.R. Appendix A that are applicable to an oil-fired boiler as defined in section 319. TABLE 1 Item Column 1 Column 2 Column 3 Column 4 Energy-using Product Testing Standard Energy Efficiency Standard Period of Manufacture 1 Household oil-fired boilers CSA B212 Seasonal energy utilization efficiency ≥ 80%On or after December 31, 1998 and before September 1, 2010 2 Household oil-fired boilers that are intended for low pressure steam systems ASHRAE 103 Annual fuel utilization efficiency ≥ 82%On or after September 1, 2010 and before January 15, 2021 2.1 Household oil-fired boilers that are intended for low pressure steam systems CSA P.2 for annual fuel utilization efficiency, standby power and off-mode power On or after January 15, 2021 3 Household oil-fired boilers that are intended for hot water systems ASHRAE 103 Annual fuel utilization efficiency ≥ 84%On or after September 1, 2010 and before September 1, 2012 4 Household oil-fired boilers that are intended for hot water systems and have tankless domestic water heating coils ASHRAE 103 Annual fuel utilization efficiency ≥ 84%On or after September 1, 2012 and before January 15, 2021 4.1 Household oil-fired boilers that are intended for hot water systems and have tankless domestic water heating coils CSA P.2 for annual fuel utilization efficiency, standby power and off-mode power On or after January 15, 2021 5 Household oil-fired boilers that are intended for hot water systems and do not have tankless domestic water heating coils ASHRAE 103 for annual fuel utilization efficiency On or after September 1, 2012 and before January 15, 2021 6 Household oil-fired boilers that are intended for hot water systems and do not have tankless domestic water heating coils CSA P.2 for annual fuel utilization efficiency, standby power and off-mode power On or after January 15, 2021 TABLE 2 Item Column 1 Column 2 Energy-using Product Energy Efficiency Standard 1 Commercial oil-fired boilers that have an input rate of ≥ 87.92 kW (300,000 Btu/h) but ≤ 732.68 kW (2,500,000 Btu/h) and are intended for hot water systems Thermal efficiency ≥ 87%2 Commercial oil-fired boilers that have an input rate of > 732.68 kW (2,500,000 Btu/h) but ≤ 2 930.71 kW (10,000,000 Btu/h) and are intended for hot water systems Combustion efficiency ≥ 88%3 Commercial oil-fired boilers that have an input rate of ≥ 87.92 kW (300,000 Btu/h) but ≤ 732.68 kW (2,500,000 Btu/h) and are intended for low pressure steam systems Thermal efficiency ≥ 84%4 Commercial oil-fired boilers that have an input rate of > 732.68 kW (2,500,000 Btu/h) but ≤ 2 930.71 kW (10,000,000 Btu/h) and are intended for low pressure steam systems Thermal efficiency ≥ 85%

An electric boiler is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 325, an electric boiler is not considered to be an energy-using product unless it is manufactured on or after September 1, 2012.

The following definitions apply in this Division.

In this Division, a reference to

An electric water heater is prescribed as an energy-using product.

However, an electric water heater is not considered to be an energy-using product

The energy efficiency standards set out in column 3 of the table to this section apply to an electric water heater described in column 1 that is manufactured during the periods set out in column 4.

An electric water heater described in column 1 complies with the energy efficiency standard set out in column 3 if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 2 that are applicable to an electric water heater as defined in subsection 369(1). TABLE Item Column 1 Column 2 Column 3 Column 4 Energy-using Product Testing Standard Energy Efficiency Standard Period of Manufacture 1 Household electric water heaters that have a bottom inlet and a V r of ≥ 50 L (13.2 US gallons) but ≤ 270 L (71.3 US gallons) CSA C191-04 Standby loss, in W, ≤ 40 + 0.2 V r On or after February 3, 1995 and before May 6, 2029 2 Household electric water heaters that have a bottom inlet and a V r of ≥ 50 L (13.2 US gallons) but < 76 L (20 US gallons) CSA C191-04 Standby loss, in W, ≤ 40 + 0.2 V r On or after May 6, 2029 3 Household electric water heaters that have a bottom inlet and a V r of > 270 L (71.3 US gallons) but ≤ 454 L (120 US gallons) CSA C191-04 Standby loss, in W, ≤ 0.472 V r − 33.5 On or after February 3, 1995 and before May 6, 2029 4 Household electric water heaters that have a top inlet and a V r of ≥ 50 L (13.2 US gallons) but ≤ 270 L (71.3 US gallons) CSA C191-04 Standby loss, in W, ≤ 35 + 0.2 V r On or after February 3, 1995 and before May 6, 2029 5 Household electric water heaters that have a top inlet and a V r of ≥ 50 L (13.2 US gallons) but < 76 L (20 US gallons) CSA C191-04 Standby loss, in W, ≤ 35 + 0.2 V r On or after May 6, 2029 6 Household electric water heaters that have a top inlet and a V r of > 270 L (71.3 US gallons) but ≤ 454 L (120 US gallons) CSA C191-04 Standby loss, in W, ≤ 0.472 V r − 38.5 On or after February 3, 1995 and before May 6, 2029 7 Household electric water heaters that have a V eff of ≥ 76 L (20 US gallons) but ≤ 208 L (55 US gallons) 10 C.F.R. Appendix E On or after May 6, 2029 8 Household electric water heaters that have a V eff of ˃ 208 L (55 US gallons) but ≤ 454 L (120 US gallons) 10 C.F.R. Appendix E Uniform energy factor ≥ 0.9349 − 0.000026 V eff On or after May 6, 2029 9 Commercial electric water heaters 10 C.F.R. Appendix B Standby loss, in %/hr ≤ 0.3 + 102.2/V s On or after January 1, 2020

A gas-fired storage water heater is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 376, a gas-fired storage water heater is not considered to be an energy-using product unless

The energy efficiency standards set out in column 3 of Table 1 to this section apply to household gas-fired storage water heaters described in column 1 that are manufactured during the periods set out in column 4.

A household gas-fired storage water heater complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 2 of Table 1 that are applicable to a gas-fired storage water heater as defined in subsection 369(1).

The energy efficiency standards set out in column 3 of Table 2 to this section apply to commercial gas-fired storage water heaters described in column 1 that are manufactured on or after July 1, 2023.

A commercial gas-fired storage water heater complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 2 of Table 2 that are applicable to a gas-fired storage water heater as defined in subsection 369(1). TABLE 1 Column 1 Column 2 Column 3 Column 4 Item Energy-using Product Testing Standard Energy Efficiency Standard Period of Manufacture 1 Household gas-fired storage water heaters CSA P.3-04 Energy factor of ≥ 0.67 – 0.0005 V r On or after February 3, 1995 and before December 31, 2016 2 Household gas-fired storage water heaters CSA P.3-04 Energy factor of ≥ 0.675 – 0.00039 V r On or after December 31, 2016 and before January 1, 2018 3 Household gas-fired storage water heaters that have a first-hour rating of < 68 L (18 US gallons) On or after January 1, 2018 and before May 6, 2029 4 Household gas-fired storage water heaters that have a first-hour rating of ≥ 68 L (18 US gallons) but < 193 L (51 US gallons) On or after January 1, 2018 and before May 6, 2029 5 Household gas-fired storage water heaters that have a first-hour rating of ≥ 193 L (51 US gallons) but < 284 L (75 US gallons) On or after January 1, 2018 and before May 6, 2029 6 Household gas-fired storage water heaters that have a first-hour rating of ≥ 284 L (75 US gallons) On or after January 1, 2018 and before May 6, 2029 7 Household gas-fired storage water heaters 10 C.F.R. Appendix E On or after May 6, 2029 TABLE 2 Column 1 Column 2 Column 3 Item Energy-using Product Testing Standard Energy Efficiency Standard 1 Commercial gas-fired storage water heaters, other than replacement units, that have an input rate of > 21.97 kW (75,000 Btu/h) but ≤ 30.5 kW (105,000 Btu/h), have a V r of ≤ 454 L (120 US gallons), use single-phase power and limit water temperatures to < 82°C (180°F) CSA P.3-15 Uniform energy factor ≥ 0.8107-0.00021 V s 2 Commercial gas-fired storage water heaters that are replacement units, have an input rate of > 21.97 kW (75,000 Btu/h) but ≤ 30.5 kW (105,000 Btu/h), have a V r of ≤ 454 L (120 US gallons), use single-phase power and limit water temperatures to < 82°C (180°F) CSA P.3-15 Uniform energy factor ≥ 0.6597-0.00024 V s 3 Commercial gas-fired storage water heaters, other than replacement units, that have a V r of > 530 L (140 US gallons) 10 C.F.R. Appendix A Thermal efficiency ≥ 90%4 Commercial gas-fired storage water heaters that are replacement units and that have a V r of > 530 L (140 US gallons) 10 C.F.R. Appendix A Thermal efficiency ≥ 80%5 Commercial gas-fired storage water heaters, other than those described in items 1 and 3, that are not replacement units 10 C.F.R. Appendix A 6 Commercial gas-fired storage water heaters, other than those described in items 2 and 4, that are replacement units 10 C.F.R. Appendix A

An oil-fired water heater is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 380, an oil-fired water heater is not considered to be an energy-using product unless

The energy efficiency standards set out in column 3 of Table 1 to this section apply to household oil-fired water heaters described in column 1 that are manufactured during the period set out in column 4.

A household oil-fired water heater complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 2 of Table 1 that are applicable to an oil-fired water heater as defined in subsection 369(1).

The energy efficiency standards set out in column 2 of Table 2 to this section apply to commercial oil-fired water heaters described in column 1 that are manufactured on or after January 1, 2020.

A commercial oil-fired water heater complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 2 of Table 2 that are applicable to an oil-fired water heater as defined in subsection 369(1). TABLE 1 Column 1 Column 2 Column 3 Column 4 Item Energy-using Product Testing Standard Energy Efficiency Standard Period of Manufacture 1 Household oil-fired water heaters CSA B211-00 Energy factor of ≥ 0.59 – 0.0005 V r On or after February 3, 1995 and before December 31, 2016 2 Household oil-fired water heaters CSA B211-00 Energy factor of ≥ 0.68 – 0.0005 V r On or after December 31, 2016 and before January 1, 2018 3 Household oil-fired water heaters that have a first-hour rating of < 68 L (18 US gallons) On or after January 1, 2018 and before May 6, 2029 4 Household oil-fired water heaters that have a first-hour rating of ≥ 68 L (18 US gallons) but < 193 L (51 US gallons) On or after January 1, 2018 and before May 6, 2029 5 Household oil-fired water heaters that have a first-hour rating of ≥ 193 L (51 US gallons) but < 284 L (75 US gallons) On or after January 1, 2018 and before May 6, 2029 6 Household oil-fired water heaters that have a first-hour rating of ≥ 284 L (75 US gallons) On or after January 1, 2018 and before May 6, 2029 7 Household oil-fired water heaters 10 C.F.R. Appendix E On or after May 6, 2029 TABLE 2 Column 1 Column 2 Column 3 Item Energy-using Product Testing Standard Energy Efficiency Standard 1 Commercial oil-fired water heaters that have an input rate of > 30.5 kW (105,000 Btu/h) but ≤ 40.99 kW (140,000 Btu/h), have a V r of ≤ 454 L (120 US gallons), use single-phase power, limit water temperatures to < 82°C (180°F) and are manufactured on or after January 1, 2020 CSA P.3-15 Uniform energy factor ≥ 0.6740 - 0.00035 V s 2 Commercial oil-fired water heaters with a V r of > 530 L (140 US gallons) that are manufactured on or after January 1, 2020 10 C.F.R. Appendix A Thermal efficiency ≥ 80%3 Commercial oil-fired water heaters, other than those described in items 1 and 2, that are manufactured on or after January 1, 2020 10 C.F.R. Appendix A

A gas-fired instantaneous water heater is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 385, a gas-fired instantaneous water heater is not considered to be an energy-using product unless

The energy efficiency standards set out in column 3 of the table to this section apply to gas-fired instantaneous water heaters described in column 1 that are manufactured during the period set out in column 4.

A gas-fired instantaneous water heater complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 2 that are applicable to a gas-fired instantaneous water heater as defined in subsection 369(1). TABLE Item Column 1 Column 2 Column 3 Column 4 Energy-using Product Testing Standard Energy Efficiency Standard Manufacturing Period 1 Household gas-fired instantaneous water heaters that have a maximum flow rate of < 6.4 L/min CSA P.3-15 Uniform energy factor ≥ 0.86 On or after January 1, 2020 and before May 6, 2029 2 Household gas-fired instantaneous water heaters that have a maximum flow rate of ≥ 6.4 L/min CSA P.3-15 Uniform energy factor ≥ 0.87 On or after January 1, 2020 and before May 6, 2029 3 Household gas-fired instantaneous water heaters that have a maximum flow rate of < 6.4 L/min 10 C.F.R. Appendix E Uniform energy factor ≥ 0.86 On or after May 6, 2029 4 Household gas-fired instantaneous water heaters that have a maximum flow rate of ≥ 6.4 L/min 10 C.F.R. Appendix E Uniform energy factor ≥ 0.87 On or after May 6, 2029 5 Commercial gas-fired instantaneous water heaters 10 C.F.R. Appendix C Thermal efficiency ≥ 94%On or after July 1, 2023

Every general service lamp that is manufactured on or after January 1, 2027 and that, for the purpose of sale or lease, is shipped from one province to another or imported into Canada must be labelled in accordance with sections 426 to 429.

Sections 425 to 429 of the former Regulations continue to apply in respect of a lamp that is referred to in section 425 of the former Regulations that is manufactured before January 1, 2027.

The principal display panel of the product’s package must display the following information in the following order:

The words “Light output”, “Flux lumineux”, “Efficacy”, “Efficacité”, “Power”, “Puissance”, “Life”, “Durée de vie”, “Light appearance” and “Apparence de la lumière” must be in the same font and be equal in size.

The words “lumens”, “lumens/watt”, “watts”, “hours”, “heures” and “Kelvin” and the upper case letter “K” must be in the same font and be equal in size, but they must not be more than 50% of the size of the words referred to in subsection (2).

The numerical values indicating the product’s luminous flux, efficacy, nominal power, life and correlated colour temperature must be in the same font and be equal in size.

If the product is a three-way lamp, the information required by paragraphs (1)(a) to (c) must be displayed for each level of the lamp’s operation.

If the product has a variable correlated colour temperature, the information required by paragraph (1)(e) must be displayed for the lamp’s range of operation or for each level of its operation.

If the design voltage of the product is other than 120 V, the information required by section 426 may correspond to

If the information corresponds to the design voltage,

The following definitions apply in this Subdivision.

The definition general service lamp in subsection (1) does not include

A general service lamp is prescribed as an energy-using product.

However, for the purposes of sections 4, 5, 435 and 436, a general service lamp is not considered to be an energy-using product if

Sections 4, 5, 424 and 430 to 444 of the former Regulations continue to apply in respect of a lamp that is

Subsection (1) does not apply in respect of a lamp that is deemed, under section 436.1, to satisfy the requirements of sections 4, 5, 435 and 436.

The energy efficiency standards set out in TSD D7SB001 apply to general service lamps.

A general service lamp complies with the energy efficiency standard if it meets that standard when tested in accordance with the applicable testing procedures established by 10 C.F.R. §430.23(gg).

A general service fluorescent lamp is prescribed as an energy-using product.

However, for the purpose of section 4, a general service fluorescent lamp is not considered to be an energy-using product unless it is manufactured on or after December 31, 1996.

The energy efficiency standards set out in column 2 of the table to this section apply to general service fluorescent lamps that are manufactured during the periods set out in column 3.

A general service fluorescent lamp complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 1 that are applicable to a general service fluorescent lamp as defined in section 445. TABLE Column 1 Column 2 Column 3 Item Testing Standard Energy Efficiency Standard Period of Manufacture 1 CSA C819-11 CSA C819-11, Table 1 On or after December 31, 1996 and before January 26, 2018 2 CSA C819-16 or 10 C.F.R. Appendix R CSA C819-16, Table 1 or average lamp efficacy × 1.011 > minimum average lamp efficacy for the product in 10 C.F.R. §430.32(n)(4) On or after January 26, 2018

For the purpose of subsection 5(1) of the Act, the following information must be provided to the Minister in respect of a general service fluorescent lamp:

The information must be collected in accordance with one of the following standards:

The following definitions apply in this Subdivision.

Despite subsection 1(3), a reference in this Subdivision to Table 1A of CSA C654-14 is a reference to that table as it read on the day on which the standard was published.

A fluorescent lamp ballast is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 451, a fluorescent lamp ballast is not considered to be an energy-using product if

The energy efficiency standards set out in column 3 of the table to this section apply to fluorescent lamp ballasts described in column 1 that are manufactured during the periods described in column 4.

A fluorescent lamp ballast complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 2 that are applicable to a fluorescent lamp ballast as defined in section 449. TABLE Column 1 Column 2 Column 3 Column 4 Item Energy-using Product Testing Standard Energy Efficiency Standard Period of Manufacture 1 Fluorescent lamp ballasts CSA C654-10 On or after February 3, 1995 and before November 14, 2014 2 Fluorescent lamp ballasts, other than T12 dimming ballasts CSA C654-14 or 10 C.F.R. Appendix Q On or after November 14, 2014 3 T12 dimming ballasts that are low-frequency and designed to operate one F34T12 lamp CSA C654-14 or 10 C.F.R. Appendix Q On or after November 14, 2014 4 T12 dimming ballasts that are high-frequency and designed to operate one F34T12 lamp CSA C654-14 or 10 C.F.R. Appendix Q On or after November 14, 2014 5 T12 dimming ballasts that are low-frequency and designed to operate two F34T12 lamps CSA C654-14 or 10 C.F.R. Appendix Q On or after November 14, 2014 6 T12 dimming ballasts that are high-frequency and designed to operate two F34T12 lamps CSA C654-14 or 10 C.F.R. Appendix Q On or after November 14, 2014 7 T12 dimming ballasts that are low-frequency and designed to operate two F96T12/ES lamps CSA C654-14 or 10 C.F.R. Appendix Q On or after November 14, 2014 8 T12 dimming ballasts that are high-frequency and designed to operate two F96T12/ES lamps CSA C654-14 or 10 C.F.R. Appendix Q On or after November 14, 2014 9 T12 dimming ballasts that are low-frequency and designed to operate two F96T12HO/ES lamps CSA C654-14 or 10 C.F.R. Appendix Q On or after November 14, 2014 10 T12 dimming ballasts that are high-frequency and designed to operate two F96T12HO/ES lamps CSA C654-14 or 10 C.F.R. Appendix Q On or after November 14, 2014

A metal halide lamp ballast is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 455, a metal halide lamp ballast is not considered to be an energy-using product if

The energy efficiency standards set out in Table 3 of CSA C863-16 apply to metal halide lamp ballasts.

A metal halide lamp ballast complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by CSA C863-16 or 10 C.F.R. §431.324 that are applicable to a metal halide lamp ballast as defined in section 453.

A torchiere is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 509, a torchiere is not considered to be an energy-using product unless it is manufactured on or after January 1, 2007.

The energy efficiency standards set out in column 2 of the table to this section apply to torchieres described in column 1 that are manufactured during the periods set out in column 3.

A torchiere complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by CSA C22.2 No. 250.4 that are applicable to a torchiere as defined in section 507. TABLE Column 1 Column 2 Column 3 Item Energy-using Product Energy Efficiency Standard Period of Manufacture 1 Torchieres that have no additional sockets Total power ≤ 190 W On or after January 1, 2007 and before January 1, 2010 2 Torchieres that have no additional sockets Total power ≤ 75 W On or after January 1, 2010 3 Torchieres that have one or more additional sockets Total power ≤ 230 W On or after January 1, 2007 and before January 1, 2010 4 Torchieres that have one or more additional sockets Total power ≤ 100 W On or after January 1, 2010

A ceiling fan light kit is prescribed as an energy-using product.

However, a ceiling fan light kit is not considered to be an energy-using product

The energy efficiency standards set out in column 3 of the table to this section apply to ceiling fan light kits described in column 1 that are manufactured during the periods set out in column 4.

A ceiling fan light kit complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 2 that are applicable to a ceiling fan light kit as defined in section 515. TABLE Column 1 Column 2 Column 3 Column 4 Item Energy-using Product Testing Standard Energy Efficiency Standard Period of Manufacture 1 Ceiling fan light kits CSA C22.2 No. 250.0 Total power for lighting ≤ 190 W On or after January 1, 2010 and before January 7, 2019 2 Ceiling fan light kits that have at least one socket, that are not packaged with a lamp for each socket and that do not have non-consumer-replaceable solid-state lighting CSA C22.2 No. 250.0 Total power for lighting ≤ 70 W On or after January 7, 2019 3 Ceiling fan light kits that have at least one socket, that are packaged with a lamp for each socket and that do not have non-consumer-replaceable solid-state lighting 10 C.F.R. §430.23(x)(1) Lighting efficacy ≥ minimum required efficacy in 10 C.F.R. §430.32(s)(6) On or after January 7, 2019 4 Ceiling fan light kits that have non-consumer-replaceable solid-state lighting 10 C.F.R. §430.23(x)(1) Lighting efficacy ≥ minimum required efficacy in 10 C.F.R. §430.32(s)(6) On or after January 7, 2019

For the purpose of subsection 5(1) of the Act, the following information must be provided to the Minister in respect of a ceiling fan light kit:

The information must be collected in accordance with CSA C22.2 No. 250.0 or 10 C.F.R. §430.23(x)(1).

An exit sign is prescribed as an energy-using product.

However, for the purpose of section 4, an exit sign is not considered to be an energy-using product unless it is manufactured on or after November 1, 2004.

The energy efficiency standards set out in column 2 of the table to this section apply to exit signs described in column 1.

An exit sign complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by CSA C860 that are applicable to an exit sign as defined in section 519. TABLE Column 1 Column 2 Item Energy-using Product Energy Efficiency Standard 1 Type 1 and Type 2 exit signs Wattage ≤ 5 W × (number of legends) 2 Type 3 exit signs Wattage ≤ 5 W × (number of legends) + 5 W

A traffic signal module is prescribed as an energy-using product.

However, for the purposes of sections 4, 5 and 525, a traffic signal module is not considered to be an energy-using product unless it is manufactured on or after January 1, 2007.

The energy efficiency standards set out in column 3 of the table to this section apply to traffic signal modules described in column 1.

For the purpose of subsection (1), the maximum power and nominal power of a traffic signal module must be determined in accordance with the following procedures: TABLE Column 1 Column 2 Column 3 Item Energy-using Product Testing Standard Energy Efficiency Standard 1 Traffic signal modules that have a red traffic signal indicator that has a nominal diameter of 200 mm (8 inches) VTCSH Circular 2 Traffic signal modules that have a red traffic signal indicator that has a nominal diameter of 300 mm (12 inches) VTCSH Circular 3 Traffic signal modules that have a green traffic signal indicator that has a nominal diameter of 200 mm (8 inches) VTCSH Circular 4 Traffic signal modules that have a green traffic signal indicator that has a nominal diameter of 300 mm (12 inches) VTCSH Circular 5 Traffic signal modules that have a red arrow traffic signal indicator VTCSH Arrow 6 Traffic signal modules that have a green arrow traffic signal indicator VTCSH Arrow

For the purpose of subsection 5(1) of the Act, the following information must be provided to the Minister in respect of a traffic signal module:

The information must be collected in accordance with