Her Excellency the Governor General in Council, on the recommendation of the Minister of Finance, makes the annexed China Surtax Remission Order (2024) under section 115 a of the Customs Tariff b. S.C. 2005, c. 38, par. 145(2)(j) S.C. 1997, c. 36
Remission
Subject to subsection (2), remission is granted of surtaxes paid or payable under the China Surtax Order (2024) in respect of the goods referred to in Schedule 1 or 2.
Remission referred to in subsection (1) is granted on the following conditions:
in the case of a good referred to in Schedule 1
it is not the subject of an order or finding, as defined in subsection 2(1) of the Special Import Measures Act, on the date of importation, and
it is imported into Canada during the period beginning on October 22, 2024 and ending on December 31, 2026;
in the case of a good referred to in column 3 of Schedule 2 that is classified under the tariff item listed in column 2, it is imported into Canada by an importer listed in column 1 during the period specified in column 4, and any other applicable condition listed in column 5 is met;
no other claim for relief of the surtax has been granted under the Customs Tariff in respect of the good;
the good is not subsequently exported to the United States in the same condition in which it was imported; and
the importer makes a claim for remission to the Minister of Public Safety and Emergency Preparedness within two years after the date of importation.
Coming into Force
This Order comes into force on the day on which it is registered.
Column 1 Column 2 Item Tariff Item Description of Goods 1 7210.12.00 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated, or coated with tin, of a thickness of less than 0.5 mm 2 7210.70.00 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, painted, varnished, or coated with plastics 3 7212.10.00 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, plated, or coated with tin 3.1 7212.30.00.10 Flat-rolled products manufactured from non-alloy steel that have a width of less than 600 mm, are plated or coated with zinc, are of Grade DX51D or an equivalent grade and have a thickness of 0.14 mm 4 7219.22.00.10 Stainless steel plates, hot-rolled, not in coils, of a thickness of at least 4.75 mm but not exceeding 10 mm, of a width of 600 mm or more but not exceeding 1,830 mm 5 7219.23.00 Stainless steel sheets and plates, hot-rolled with 2B finish, of type 304 or 304L, with 11 gauge thickness, width of 5 feet, length of 20 feet, of specification ASTM A240 6 7219.23.00 Stainless steel sheets and plates, hot-rolled with 2B smooth finish, of type 304 or 304L, with 11 gauge thickness, width of 6 feet, length of 12 feet, of specification ASTM A240 7 7219.31.00 Stainless steel sheets and plates, cold-rolled with 2B smooth finish, of type 304 or 304L, with 3/16 inch thickness, width of 5 feet, length of at least 10 feet but not exceeding 20 feet, of specification ASTM A240 7.1 7219.33.00.10 Polished stainless steel coils and sheets of the following grades and finishes: – grade 304, finish No. 4– grade 316, finish No. 2B– grade 316, finish No. 4– grade 304, finish BA1 7.2 7219.33.00.90 Polished stainless steel coils and sheets of grades 304 or 430 and finish No. 4 7.3 7219.34.00.10 Polished stainless steel coils and sheets of grade 304 and finish No. 4 7.4 7219.34.00.90 Polished stainless steel coils and sheets of grade 430 and finish No. 4 8 7220.20.00 Flat-rolled stainless steel products, with a width of less than 600 mm, not further worked than cold-rolled (cold-reduced), for use in the production of goods classified under tariff item 7310.10.00 9 7222.19.00.21 Stainless steel flat bars, not further worked than hot-rolled, hot-drawn, or extruded 10 7222.20.00 Stainless steel metric round bars, of type 304, cold-rolled, h9 tolerance, with an outer diameter of 16 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 50 mm or 60 mm, of specification ASTM A276 10.1 7222.20.00.91 Stainless steel bars and rods, not further worked than cold-formed or cold-finished, of grade 304 or 304L 11 7222.30.00 Stainless steel metric square bars of 30 mm or 40 mm, of type 304, cold-rolled, of length 4000 mm, of specification ASTM A276 12 7223.00.00 Stainless steel lashing wire or rebar tie wire 13 7223.00.00 Ultra-fine stainless steel wire, with a diameter of 0.15 mm or 0.28 mm 13.1 7223.00.00.90 Stainless steel wire with a triangular (delta) profile and a solid cross-section that is manufactured from grade 304, 304L, 316 or 316L stainless steel, and that has a hardness of 28 to 32 HRC, a cross-sectional area greater than 0.787 mm² and dimensions of 0.090 inch by 0.105 inch 14 7225.11.00 Silicon grain-oriented steel, with a width of 600 mm or more 15 7225.99.00 Specialty steel products: S-7 VRM steel plates, D-2 VRM steel plates or A-2 VRM steel plates 16 7226.11.00 Silicon grain-oriented steel, with a width of less than 600 mm 17 7226.19.00 Silicon amorphous steel, with a width of less than 600 mm 18 7226.99.00 Specialty steel products of grade 4140, heat-treated, annealed 19 7228.30.00 Round specialty steel products, of the following grades: of grade 4340, heat-treated, of grade 8620, of grade 3312, hot-rolled, annealed, of grade 1045, hot-rolled, of grade 1018, hot-rolled or of grade EN30B 20 7228.40.00 Alloy steel bars and rods 21 7228.50.00 Other bars of other alloy steel, not further worked than cold-formed or cold-finished 21.01 7228.50.00.20 Tool steel flat bars that are manufactured from alloy grades A8 MOD or H13 and that have a thickness of 1.375 inches or 3.00 inches 21.02 7228.50.00.20 Tool steel round bars that are manufactured from alloy grades D2 or A2 and that have diameters of at least 5.50 inches but not exceeding 13.00 inches 21.1 7228.60.00 Bars, of alloy or non-alloy steel, with an outside diameter of at least 25 mm but not exceeding 203 mm, with a wall thickness of at least 5 mm but not exceeding 38 mm and a length not exceeding 12 m, with forged or machined ends 21.2 7304.11.00 Seamless stainless steel tubes, of circular cross-section, with an external diameter not exceeding 114.3 mm 22 7304.19.00 Unfinished seamless carbon or alloy steel mother tubes that have an outside diameter of at least 184 mm but not exceeding 610 mm, a wall thickness of at least 9 mm but not exceeding 110 mm and a length of at least 7.72 m but not exceeding 15.24 m, that are not stenciled as meeting any line pipe product specification and that are suitable for use in the production, and not solely the finishing, of seamless line pipes manufactured to API 5L, CSA Z245.1, ISO 3183, ASTM A333, ASTM A335, ASTM A106, or ASTM A53 23 7304.23.00 Drill pipes, other than of stainless steel, of specification API 5DP or API 7-1 24 7304.29.00.79 Tubes, pipes and hollow profiles, seamless, of iron — other than cast iron — or steel: coupling stock, with an outside diameter of at least 2.875 inches but not exceeding 37 inches 24.1 7304.31.00 Cold-drawn seamless mechanical tube of grade C1026, with an outside diameter of at least 2.625 inches but not exceeding 4.25 inches, with an inside diameter of at least 1.75 inches but not exceeding 4 inches, and a wall thickness of at least 0.313 inch but not exceeding 1 inch 24.2 7304.39.00 Steel coupling stock, of specification API 5CT L80, no coating 24.3 7304.39.00.70 Seamless tubes and pipes, of iron or non-alloy steel, for use in oil and gas applications, with an outside diameter of at least 25 mm but not exceeding 406 mm, with a wall thickness of at least 3 mm but not exceeding 50 mm, with lengths not exceeding 12 m 24.4 7304.49.00.90 Seamless tubes and pipes, of stainless steel, annealed and pickled or bright finish, for oil and gas service, with an outside diameter of at least 25 mm but not exceeding 273 mm, with a wall thickness of at least 2 mm but not exceeding 30 mm, with lengths not exceeding 12 m 24.5 7304.51.00 24.6 7304.59.00 Seamless tubing of alloy-steel, hot-finished, of an outside diameter of 5.50 inches and an inside diameter of 3.865 inches 25 7304.59.00.60 25.01 7304.90.00.10 Seamless non-alloy steel tubes in the form of irregular or oval mother tubes that have an outer diameter of at least 20 mm but not exceeding 150 mm and a length of at least 8 m but not exceeding 12 m 25.02 7304.90.00.20 Seamless alloy steel tubes in the form of irregular or oval mother tubes that have an outer diameter of at least 20 mm but not exceeding 150 mm and a length of at least 8 m but not exceeding 12 m 25.1 7305.31.00.19 Longitudinally welded pipes of grade 3 ASTM A252 25.2 7305.39.00.20 Spiral welded steel pipes, of circular cross-sections 25.21 7306.30.00.41 Welded steel tubes drawn over mandrel (DOM) that have circular cross-sections, and that have outer diameters of at least 4.95 inches but not exceeding 14.35 inches, a wall thickness of at least 0.185 inch but not exceeding 0.250 inch and inner diameters of at least 4.58 inches but not exceeding 13.85 inches 25.3 7306.29.00 Welded tubes of iron or non-alloy steel, with an outside diameter of at least 19.1 mm but not exceeding 88.9 mm, and a wall thickness of at least 2.0 mm but not exceeding 7.6 mm 25.4 7306.30.00.51 Carbon steel DOM (drawn over mandrel) structural tubing, grade 1026, with an outside diameter exceeding 60.325 mm but not exceeding 168.28 mm, of specification ASTM A513, A106 or A519 25.5 7306.30.00.59 Carbon steel DOM (drawn over mandrel) tubing, other than structural, grade 1026, with an outside diameter exceeding 60.325 mm but not exceeding 168.28 mm, of specification ASTM A513, A106 or A519 25.6 7306.30.00.61 Carbon steel DOM (drawn over mandrel) structural tubing, grade 1026, with an outside diameter exceeding 168.28 mm but not exceeding 273.05 mm, of specification ASTM A513, A106 or A519 25.7 7306.40.00.00 Stainless steel of grade 304L flared tubes 26 7306.40.00.10 Stainless steel tubes, circular, of type 304L, with an external diameter not exceeding 25.3 mm 27 7306.40.00.20 Stainless steel tubes, circular, of type 304L, with an external diameter exceeding 25.3 mm but not exceeding 114.9 mm 27.1 7306.50.00 Welded tubes of circular cross-section, of alloy steel other than stainless steel, with an outside diameter of at least 19.1 mm but not exceeding 88.9 mm, with a wall thickness of at least 2.0 mm but not exceeding 7.6 mm 28 7306.61.00.39 Steel tubes — other than galvanized — rectangular, of type 304L, with an external periphery not exceeding 812.8 mm 29 7604.21.00 Aluminum alloy hollow profiles with a powder coating finish on the interior and exterior surfaces 30 7604.29.00 Aluminum alloy bars, rods and profiles: Die #C300X110, Die #C410X110 or Die #1693 30.1 7604.29.00.11 Bars of aluminum alloys, of round cross-section, with a cross-sectional dimension exceeding 12.7 mm 31 7605.19.00 32 7606.11.00 Non-alloyed aluminum plates, sheets and strip, with a thickness exceeding 0.2 mm, rectangular, compliant with specification ASTM B209 or equivalent industry specifications, flat 2 mm per metre in all directions, with diagonals that do not measure a difference of more than 4 mm, no visible ripples on any sheet and no scratches, gouges or residual oils 33 7606.11.00 Non-alloyed aluminum plates, sheets and strip, with a thickness exceeding 0.2 mm, rectangular, used as cathode sheets in zinc electrowinning processes 34 7606.11.00 Non-alloyed aluminum plates, sheets and strip, rectangular, of grade 1050 Aluminum “O” Coil or grade 1350 Aluminum “O” Coil, compliant with the chemical requirements of specification ASTM B233-97, with a thickness of at least 0.020 inches but not exceeding 0.060 inches, a width of at least 2 inches but not exceeding 33.5 inches, and a mill finish 35 7606.12.00 Aluminum alloy plates, sheets and strip, of a thickness exceeding 0.2 mm, rectangular 35.1 7606.12.00 Rectangular aluminum sheets that are manufactured from alloy AA3105, meet specification ASTM B209 and are coated in polyester paint 36 7606.12.00.11 37[Repealed, SOR/2025-210, s. 12] 37.1[Repealed, SOR/2025-210, s. 12] 38 7606.12.00.12 Aluminum alloy plates, sheets and strip, with a thickness of 7 mm or more, rectangular, not clad, compliant with specification ASTM B209 or equivalent industry specifications, flat 2 mm per metre in all directions, with diagonals that do not measure a difference of more than 4 mm, no visible ripples on any sheet and no scratches, gouges or residual oils 38.1 7606.12.00.12 Aluminum coils of alloy 5005, H14 or H34, anodized quality, not clad, with a thickness of 7 mm or more 38.2 7606.91.00.90 Aluminum plates, in sheets and strips, that are manufactured from non-alloyed aluminum, have a thickness of at least 3.0 mm but not exceeding 5.5 mm, are circular and have a diameter of at least 100 mm 38.21 7606.92.00 Non-rectangular aluminum sheets that are manufactured from alloy AA3105, meet specification ASTM B209 and are coated in polyester paint 38.3 7607.11.00 Aluminum foil, rolled but not further worked, not backed, in coils or reels, with a thickness of at least 0.004 inch but not exceeding 0.010 inch, and a width of at least 0.98 mm but not exceeding 22 inches, whether or not surface-treated 38.4 7607.11.00.20 Aluminum foil, in rolls, that have a thickness of at least 0.013 mm but not exceeding 0.017 mm, a width of at least 5 inches and a maximum length of 1700 feet, and that are manufactured from alloy 1145, 1235, 8011, 8079, or 8066 39 7607.19.00.00 39.1 7608.20.00 Rigid aluminum conduit, threaded, in 10-foot lengths, in trade sizes of at least 0.5 inch but not exceeding 6 inches, with coupling on one end 40 7609.00.00
If the description in column 2 covers only a subset of goods classified under the tariff item referred to in column 1, remission is granted only for the goods described in column 2.
Column 1 Column 2 Column 3 Column 4 Column 5 Item Business Number Tariff Item Description of Goods Period Conditions 1 102645082 7607.11.00 Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, rolled but not further worked From October 22, 2024 to December 31, 2026 1.1 103569372 7229.90.00 Chrome silicon wire, round, with a diameter of at least 1.5 mm but not exceeding 8.51 mm From October 22, 2024 to December 31, 2026 1.2 105489272 7212.40.00 Steel strapping, with open or closed steel sleeves From October 22, 2024 to August 31, 2025 7217.90.00 Steel black annealed wire coils, rebar tie wire and galvanized black annealed wire coils From October 22, 2024 to December 31, 2026 1.3 105497242 7223.00.00.90 Stainless steel wires of alloy 304L, cold drawn and annealed From October 22, 2024 to July 1, 2025 2 119446847 7228.30.00.72 Hot-rolled steel bars, of special bar quality From October 22, 2024 to December 31, 2026 3 122960222 7606.91.00.10 Aluminum plates, sheets and strip, with a thickness exceeding 0.2 mm, circular, with circumference from at least 6 inches but not exceeding 20 inches From October 22, 2024 to December 31, 2026 4 137864229 7305.31.00 Coated permanent steel piles, longitudinally welded, with a pipe outer diameter of 1.219 m, a thickness of 25.4 mm and lengths not exceeding 95 m From October 22, 2024 to December 31, 2026 7305.39.00 Spiral-welded steel piles that are used as temporary piles, and that have an outer diameter of at least 0.914 m but not exceeding 1.067 m and a length of at least 41 m but not exceeding 75 m 4.1 140515958 7604.29.00.30 Extruded 5-star (blade) turbulator, with a diameter of 8.30 mm of alloy 6063, of temper T5, of straight lengths of up to 4877 mm From October 22, 2024 to December 31, 2026 7606.12.00.20 Extruded rectangular micro channel tubes, 76.2 mm x 9.04 mm, with a wall thickness of 0.51 mm, of alloy 3003, of temper F, of straight lengths of up to 4877 mm From October 22, 2024 to December 31, 2026 7608.20.00 Extruded round thin-walled aluminum tubes, of alloy 3003, of temper O, with an outside diameter of 9.09 mm, with a wall thickness of 0.51 mm, spooled on level wound coils From October 22, 2024 to December 31, 2026 5 709514509 7304.39.00 From October 22, 2024 to December 31, 2025 5.1 723429320 7305.39.00.20 Welded tubes manufactured from non-alloy steel that have circular cross-sections and an outer diameter of at least 1 m but not exceeding 3.2 m, a wall thickness of at least 19 mm but not exceeding 33 mm and a length not exceeding 50 m, and that are used as single-wall steel casing in drilling foundation piles From October 22, 2024 to December 31, 2026 7305.31.00.19 Longitudinally welded tubes manufactured from non-alloy steel that have an outside diameter of at least 1 m but not exceeding 3.2 m, a wall thickness of at least 19 mm but not exceeding 33 mm and a length not exceeding 50 m From October 22, 2024 to December 31, 2026 6 729240341 7606.12.00 Flat-rolled aerospace-grade aluminum, of alloys 7475, 7075 or 2024 From October 22, 2024 to December 31, 2025 Imported for sale to company with business number 871361366 7 729240341 7606.12.00.12 Aluminum alloy plates, sheets and strip, rectangular, not clad, with a thickness of 7 mm or more From October 22, 2024 to March 31, 2025 Imported for sale to company with business number 861072163 8 736401290 7223.00.00.90 Stainless steel profile wire with a solid cross-sectional area greater than 0.787 mm 2 From October 22, 2024 to December 31, 2026 7306.40.00.10 Stainless steel capillary line 9 737151720 7604.21.00.10 Aluminum hollow profiles, unworked From October 22, 2024 to December 31, 2026 7606.12.00.20 Aluminum alloy plates, sheets and strip, with a thickness exceeding 0.2 mm, rectangular, clad 9.01 741519524 7222.11.00.10 Stainless steel rebar From October 22, 2024 to December 31, 2026 9.1 747545747 7217.10.00 Non-alloy steel wire, not plated or coated, whether polished or not From October 22, 2024 to December 31, 2025 7217.30.00 Copper plated steel wires, plated or coated with other base metal From October 22, 2024 to June 1, 2026 9.2 756550901 7604.29.00.30 Aluminum profiles, extruded, with a cross-sectional dimension exceeding 254 mm, supplied in straight lengths From October 22, 2024 to December 31, 2026 10 758833297 7210.70.00.90 Pre-painted steel coils PPGI or PPGL, with a thickness of at least 0.37 mm but not exceeding 0.45 mm, AZ100 g/M² with polyester and epoxy coating in black or brown, and a width of at least 590 mm but not exceeding 1220 mm From October 22, 2024 to December 31, 2026 11 761094119 7607.11.00 Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, rolled but not further worked From October 22, 2024 to December 31, 2026 12 769792870 7607.11.00 Aluminum foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding a length of 0.2 mm, rolled but not further worked, of alloy 3003 or 3004, with food-safe lubrication From October 22, 2024 to December 31, 2026 13 778340406 7606.12.00.20 Aluminum sheets, with a thickness exceeding 0.2 mm, rectangular, clad, of alloy 3003 or 4045 From October 22, 2024 to December 31, 2026 7606.92.00.00 Aluminum plates, sheets and strip, with a thickness exceeding 0.2 mm, other than rectangular, of alloy 4043, 4045, 3003, 3005 or 7072 7607.11.00.20 Aluminum foil, not backed, rolled but not further worked, with a thickness of 0.005 mm or more but less than 0.127 mm, of alloy 3003 14 782889604 7210.12.00 Electrolytic tinplate of iron or non-alloy steel, batch annealed materials or box annealed materials, with a thickness of less than 0.50 mm and width of more than over 600 mm From October 22, 2024 to December 31, 2026 Imported for sale to company with business number 104708409 14.01 795006428 7304.39.00.90 Seamless steel tubes of non-alloy steel, of a circular cross-section, with an outside diameter of at least 1 m but not exceeding 3 m, a wall thickness of at least 25 mm but not exceeding 30 mm, meeting specifications equivalent to CSA G40.20-13/G40.21-13 or ASTM A572 From October 22, 2024 to December 31, 2026 14.02 797799673 7306.30.00 Steel electrical metallic tubing (EMT), galvanized, non-threaded, in 10-foot lengths, trade size of at least 1.5 inches but not exceeding 4 inches From October 22, 2024 to December 31, 2026 14.1 798045084 7604.21.00.90 Aluminum bars, rods and profiles, hollow profiles, other From October 22, 2024 to December 31, 2026 15 808739577 7607.11.00 Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, rolled but not further worked From October 22, 2024 to December 31, 2026 15.1 813792462 7607.11.00.20 Aluminum foil, not backed, rolled but not further worked, with a thickness of at least 0.005 mm but not exceeding 0.127 mm, of alloy 8079 From October 22, 2024 to December 31, 2026 16 842474249 7217.10.00.43 Spring wire, with a diameter of 1.0 mm or more but less than 1.5 mm From October 22, 2024 to December 31, 2026 7217.10.00.44 Spring wire, with a diameter of 1.5 mm or more but less than 3 mm 17 858299928 7606.91.00 Aluminum plates, sheets and strip, with a thickness exceeding 0.2 mm, other than rectangular, non-alloyed, of the 1000, 5000 or 8000 series From October 22, 2024 to December 31, 2026 7606.92.00 Aluminum plates, sheets and strip, with a thickness exceeding 0.2 mm, other than rectangular, alloyed, of the 1000, 5000 or 8000 series 7607.11.00 Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, rolled but not further worked, of the 1000, 5000 or 8000 series 7607.19.00 Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, other than rolled but not further worked, of the 1000, 5000 or 8000 series 18 861072163 7606.12.00.12 Aluminum alloy plates, sheets and strip, rectangular, not clad, with a thickness of 7 mm or more From April 1, 2025 to December 31, 2026 19 861206423 7306.50.00.00 Steel tubes, circular, cold-rolled, of specification ASTM A500 gr A From October 22, 2024 to December 31, 2026 7306.61.00.39 Steel tubes, rectangular, cold-rolled, of specification ASTM A500 gr A 7306.69.00.39 Steel tubes, oval, of specification ASTM A500 gr A 20 863579827 7607.11.00 Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, rolled but not further worked From October 22, 2024 to December 31, 2026 21 872321203 7606.12.00 Aluminum alloy plates, sheets and strip, with a thickness exceeding 0.2 mm, rectangular From October 22, 2024 to December 31, 2026 22 872889514 7228.40.00 Steel bars with an outer diameters of at least 7.1 inches but not exceeding 26.6 inches, of grade 4130, of specification API 6A From October 22, 2024 to December 31, 2026 23 876686320 7607.11.00 Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, rolled but not further worked From October 22, 2024 to December 31, 2026 24 882092562 7219.90.00#301 Full Hard Stainless Steel coil, with thickness of 0.02 inches (0.5 mm), width of 1 inch (25 mm), grounded edges, purchased in large coils From October 22, 2024 to December 31, 2025 24.01 891389389 7225.40.00 Flat-rolled products of other alloy steel, hot-rolled, of a width of at least 600 mm, including plates and other flat-rolled forms From October 22, 2024 to December 31, 2026 24.1 892183476 8703.40.90 Non-plug-in hybrid passenger vehicles, with both a spark-ignition internal combustion piston engine and an electric motor for propulsion, with a cylinder capacity of 1000 cm³ or more For goods imported on or after October 1, 2024 Remission limited to a maximum of 554 vehicles 24.2 895930287 7607.11.00.20 Rolls of aluminum foil with a thickness ranging from 7 µm to 70 µm and a width of at least 40 inches but not exceeding 60 inches From October 22, 2024 to December 31, 2026 25 896964400 7219.90.00 From October 22, 2024 to July 31, 2026 7606.12.00 26 899771042 7606.12.00 Pre-painted aluminum coil, of alloy 3003 or 3105, with a thickness of 0.012 inches, 0.017 inches, 0.0234 inches, 0.027 inches or 0.32 inches From October 22, 2024 to December 31, 2026 Imported for sale to company with business number 100980127
If the description in column 3 covers only a subset of goods classified under the tariff item referred to in column 2, remission is granted only for the goods described in column 3.