SOR-2025-122 United States Surtax Remission Order (2025)

Goods Column 1 Column 2 Item Goods Tariff Classification Number 1 Specialized infant formulas 2202.99.39.10 2202.99.39.20 2 Nutrition formulas, metabolic products, formulated liquid diet or human milk fortifiers 1901.90.34.90 1902.19.11.00 1902.19.12.30 1902.19.12.90 1902.19.19.00 1902.30.11.00 1902.30.19.00 2106.90.35.00 2106.90.39.90 2106.90.95.90 2202.99.39.10 2202.99.39.20 3 Medical compression garments 6115.10.10 6115.10.91 6115.10.99 4 Sterile barrier film or pouches for use in medical manufacturing 3923.21.90.90 6305.39.00.00 5 The following freezers and refrigerators: 8418.69.90 6 Inter-hospital transfer vans with fewer than 10 passengers 8703.24.00.92

Goods Column 1 Column 2 Item Tariff Classification Number Goods 1 0404.10.10 2 1006.20.00.10 Long grain brown rice, husked for bulk processing in Canada 3 1006.30.00.11 Long grain rice, semi-milled or wholly milled, whether or not polished or glazed, parboiled 3.1 1205.10.00.10 Low erucic acid rape or colza seeds, for sowing 3.2 2204.29 Wine of fresh grapes, other than sparkling wine, including fortified wines, in containers holding more than 10 litres, for further processing in Canada 4 2505.10.00 Silica sand and quartz sands 5 3502.20.00 5.1 3918.90.90.90 Linear low density polyethylene (LLDPE) grass in 200 foot long rolls, with a width of 26.75 inches 5.2 3923.21.90 Three-ply form-fit packaging, constructed entirely of linear low-density polyethylene, each ply with a thickness of 3.2 thousands of an inch, with a 2-inch fill port with membrane and cutter, and a 2-inch dispense port, with internal seal dimensions of a length of 45 inches, of a width of 45 inches, of a height of 47 inches 6 3923.29.90 Sacks and bags (including cones), of plastics 7 3925.90.00 Fibreglass bullet-resistant wall panels 7.1 4011.70 New pneumatic tires, of rubber, of a kind used on agricultural or forestry vehicles and machines 8 4011.80.10 New pneumatic tires, of rubber, of a kind used on construction, mining or industrial handling vehicles and machines, for use with combination excavating and transporting scrapers of subheading 8429.30 or 8430.69, of a size of 36.00 inches × 51 inches or 40.00 inches × 57 inches 9 4011.80.90 New pneumatic tires, of rubber, of a kind used on construction, mining or industrial handling vehicles and machines with rim diameters of 27 inches or more 9.1 4011.90.10 New pneumatic tires, of rubber, for use with appliances of subheading 8424.82, combination excavating and transporting scrapers of subheading 8429.30 or 8430.69, horticultural machinery for soil preparation and lawn or sports-ground rollers of heading 84.32, horticultural mowers (other than mowers for lawns, parks or sports-grounds) of heading 84.33 and of a size of 36.00 × 51 or 40.00 × 57 10 4012.90.90 Tire treads and tire flaps, of rubber 11 4407.29.00 Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm. Of tropical wood: Cabreuva or Jatoba 12 4407.91.00 Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm. Of oak (Quercus spp.): white oak or red oak 13 4407.93.00 Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm. Of maple (Acer spp.) 14 4407.94.00 Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm. Of cherry (Prunus spp.), in bundles of debarked and sliced, raw (no coating, unshaped) sawn lumber, with a length of 8 to 12 feet, with a width of 4 to 24 inches, with a moisture content of 50 to 80%, No. 2 or No. 3 common grade 15 4407.95.00 Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm. Of ash (Fraxinus spp.), in bundles of debarked and sliced, raw (no coating, unshaped) sawn lumber, with a length of 8 to 12 feet, with a width of 4 to 24 inches, with a moisture content of 50 to 80%16 4407.99.00 Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm. Of hickory (Carya spp.) or black walnut (Juglans spp.) 17 4408.10.00 Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm. Of coniferous wood 18 4408.39.00 Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm. Of tropical wood: Other 19 4408.90.00 Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm. Other 20 4409.29.90 Wood continuously shaped along any of its edges, ends or faces, whether or not planed, sanded or end-jointed. Of shagbark hickory (Carya ovata) or mockernut hickory (Carya tomentosa), with straight grain and free of knots and defects: squares of a width of 1 inch, height of 1 inch and length of 18.5 inches or dowels of a diameter of 0.805 inches or 0.875 inches 20.1 4411.94.00 Compressed paperboard strips, with a thickness of 0.4375 inch, with a width of 2.5 inches, with a length of 96 inches, plain or coated with plastic 21 4412.33.00 Plywood sheets, of poplar (Populus spp.), of a thickness of 3/8 inch, of dimensions 4 feet × 8 feet, industrial grade, 4-ply, C-C finish 22 4412.99.00 High density wood fibre panels, certified to be formaldehyde-free, of a thickness of 2.3 mm, sandblasted on both sides, light in colour 22.1 4819.10.00 Cardboard containers, 8-ply, of interior dimensions of 42.5 inches length by 34.5 inches width, exterior dimensions of 46.5 inches length by 38.5 inches width by 42 inches height 22.11 4819.20.00 Boxes, of corrugated fibreboard, of C-flute laminated construction, with an edge crush test rating of 55 ECT, with a length of 23.000 inches, with a width of 13.500 inches, with a height of 9.875 inches, waterproof 22.2 4819.20.00.90 Paperboard crates, of pressed or formed laminated paperboard, of a thickness of at least 0.160 inch but not exceeding 0.200 inch, with a cross-section of 5.0 inches by 5.0 inches, of a length of at least 21 feet but not exceeding 23 feet 23 4819.30.00.10 Sacks and bags, having a base of a width of 40 cm or more, multiwall, of paper 24 4819.40.00.20 Other sacks and bags, including cones, multiwall, of paper 25 5703.21.00 Synthetic turf for sports applications for conversion into a modular system made in Canada, of straight fibres extruded and tapered (layer 1) and texturized fibres extruded then texturized, stretched and tapered (layer 2) 26 6305.33.00 Polywoven bags, of a kind used for the packing of goods, of polyethylene or polypropylene strip or the like 26.1 7106.92.00.90 Composite strip made of beryllium copper (C17200) with silver overlay 27 7113.11.10.90 Clasps, posts, cups, earring backs or posts with settings, of 14 carat or 10 carat sterling silver, for use in the manufacture of jewelry 28 7113.19.10.90 Rope chain or curb chain, of 14 carat or 10 carat gold, for use in the manufacture of jewelry 28.1 7116.20.90 Polycrystalline diamond compact (PDC) cutters and blanks 28.2 7207.20.00.30 Ductile iron bars, of cast iron, hot-rolled or rough turned, of grade 65-45-12 or 80-55-06, of specification ASTM A536 28.21 7208.26.00 28.22 7208.27.00 28.23 7208.38.00.10 Flat-rolled products of non-alloy steel, in coils, hot-rolled, of a specification ASTM A606 Type 4, of a thickness of at least 0.171 inch but not exceeding 0.184 inch, with a width of 48 inches, with a mill surface finish or an untreated surface finish 28.3 7208.38.00.50 Flat-rolled steel sheets, hot-rolled, of a length of 240 inches, of a width of 84 inches, with a thickness of 11GA, and grade of SAE J403GR1010 28.31 7208.39.00 28.32 7209.15.00 Flat-rolled products of carbon steel, in coils, not further worked than cold-rolled (cold-reduced), annealed, of grade SAE J403 1018, with a minimum spheroidization of 95%, of a thickness of at least 4.24 mm but not exceeding 4.35 mm, with a width of 600 mm or more 28.33 7209.16.00 28.34 7209.16.00.40 Flat-rolled products of iron or non-alloy steel, in coils, of specification SDI, of a width of 600 mm or more, of a thickness exceeding 1 mm but less than 3 mm 28.4 7209.16.00.90 28.5 7209.17.00 29 7209.18.00 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not further worked than cold-rolled or cold-reduced, not clad, plated or coated, in coils, of a thickness of less than 0.5 mm, of specification ASTM 1045, 1050, 1055 or 1067-1070 30 7210.12.00 Tinplate sheets of dimensions 28.5 inches × 28.875 inches, 30 inches × 30 inches or 34.875 inches × 34.875 inches, with a thickness of 0.0135 inches, coated with up to 0.25 pounds of tin on both sides, of specification ASTM A623 or A624 (Material T1, batch annealed) 30.01 7210.30.00 30.02 7210.49.00 30.04 7210.49.00.70 30.1 7210.61.00 31 7210.69.00 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, plated or coated with aluminum, other than with aluminum-zinc alloys 32 7210.70.00 Flat-rolled products of iron or non-alloy steel, with a width of 600 mm or more, painted, varnished or coated with plastic 33 7210.90.00 33.01 7211.14.00.90 Flat-rolled products, of non-alloy steel, in coils, not further worked than hot-rolled, of grade SAE/AISI 1070 to 1075, SAE/AISI C1050 or SAE/AISI 4130, of a thickness of at least 4.75 mm but not exceeding 6.35 mm, uncoated but oiled 33.02 7211.23.00 33.1 7211.29.00 34 7212.10.00 Tinplate coil of a length of 3 inches, 4.625 inches, 6.3125 inches, 11.3 inches or 16 inches, with a thickness of 0.0135 inches, coated with up to 0.25 pounds of tin on both sides, of specification ASTM A623 or A624 (Material T1, batch annealed) 34.001 7212.20.00 34.0011 7212.30.00 34.002 7212.30.00.40 Flat-rolled products, in coils, of carbon steel, of grade 1006, with a thickness of at least 1.44 mm, with a width of less than 600 mm 34.003 7212.40.00.21 Flat-rolled products, of coils, sheets or plates, of carbon steel, of a width of less than 600 mm, plated or coated with zinc, electrolytically, and painted, varnished or coated with plastics 34.004 7212.40.00.90 Flat-rolled products, in coils, of carbon steel, of grade 1006, with a thickness of at least 1.44 mm, of a width of less than 600 mm, hot-dipped, galvanized, polymer-laminated 34.005 7212.50.00 Flat-rolled products, in coils, sheets or plates, of aluminized carbon steel, of grade ASTM A463 CQ T-125, of a width of less than 600 mm 34.0051 7212.50.00.40 34.0052 7212.50.00.50 34.006 7212.50.00.60 Flat-rolled products, in coils, of carbon steel, of grade 1006, with a thickness of at least 1.44 mm, of a width of less than 600 mm 34.007 7213.99.00 Bars and rods, of iron or non-alloy steel, in irregularly wound coils, hot-rolled, of special bar quality carbon steel, of grade AISI 1536M, of a diameter of at least 0.8125 inch but not exceeding 1.1250 inches, with a coil length not exceeding 65 inches 34.01 7214.91.00 Continuous cast iron bars, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling, of grade 65-45-12, 65-40-18, or 60-55-06, with rectangular cross-section of a width of at least 1 inch but not exceeding 20 inches and a length of at least 2 inches but not exceeding to 40 inches 34.02 7214.99.00 34.021 7214.99.00.41 Round steel bars, hot rolled, of grades 55 and 105, of a diameter of at least 0.50 inch but not exceeding 3.00 inches, uncoated 34.022 7215.10.00 Other bars, of iron or non-alloy steel, not further worked than cold-formed or cold-finished, including ground, turned or polished, of grade 1018, without coating or plating 34.023 7215.10.00.20 34.03 7215.10.00.90 34.04 7215.50.00 34.0401 7215.50.00.21 Other bars and rods, other, rounds, of carbon steel, not further worked than cold-formed or cold-finished, of grade AISI 1144 or 1045, of specification ASTM A108, with a diameter exceeding 4.50 inches, ground, turned or polished 34.041 7215.50.00.29 34.042 7215.50.00.90 Other bars and rods, other, of carbon steel, not further worked than cold-formed or cold-finished, of grade AISI 1018, of specification ASTM A108, with a square cross-section 34.05 7215.90.00 Other bars and rods of iron or non-alloy steel 34.051 7216.31.00.21 U-section structural channels MC designation, American standard, of non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of grade 50, of specification ASTM A572 or CSA G40.21 345W, with a height of 304.8 mm, with a length of 15 240 mm, uncoated 34.06 7216.32.00 I sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more 34.07 7216.33.00 H sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more 34.071 7216.40.00.22 L-section structural angles, with unequal legs of non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of grade 50, of specification ASTM A572, with a height of 203.2 mm, with a width of 152.4 mm, with a thickness of 12.7 mm 34.08 7219.11.00 Flat-rolled products of stainless steel, in coils, not further worked than hot-rolled, of a thickness exceeding 10 mm, of a width of 600 mm or more 34.09 7219.12.00 Flat-rolled products of stainless steel, in coils, not further worked than hot-rolled, of a thickness of at least 4.75 mm but not exceeding 10.00 mm, of a width of 600 mm or more 34.1 7219.13.00 Flat-rolled products of stainless steel, in coils, not further worked than hot-rolled, of a thickness of at least 3.00 mm but not exceeding 4.75 mm, of a width of 600 mm or more 34.11 7219.14.00 Flat-rolled products of stainless steel, in coils, not further worked than hot-rolled, of a thickness of less than 3 mm, of a width of 600 mm or more 34.12 7219.21.00 34.121[Repealed, SOR/2026-154, s. 28] 34.13 7219.22.00 34.14 7219.23.00 34.15 7219.24.00 34.16 7219.31.00 Flat-rolled products of stainless steel, not further worked than cold-rolled (cold-reduced), of a thickness of 4.75 mm or more, of a width of 600 mm or more 34.17 7219.32.00 Flat-rolled products of stainless steel, not further worked than cold-rolled (cold-reduced), of a thickness of at least 3.00 mm but not exceeding 4.75 mm, of a width of 600 mm or more 34.18 7219.33.00 Flat-rolled products of stainless steel, of a width of 600 mm or more, not further worked than cold-rolled (cold-reduced), of a thickness exceeding 1 mm but less than 3 mm 34.19 7219.34.00 Flat-rolled products of stainless steel, of a width of 600 mm or more, not further worked than cold-rolled (cold-reduced), of a thickness of 0.5 mm or more but not exceeding 1 mm 34.2 7219.35.00 Flat-rolled products of stainless steel, of a width of 600 mm or more, not further worked than cold-rolled (cold-reduced), of a thickness of less than 0.5 mm 34.201 7219.90.00 34.21 7220.11.00 Flat-rolled products of stainless steel, of a width of less than 600 mm, not further worked than hot-rolled, of a thickness of 4.75 mm or more 34.211 7220.12.00 Flat-rolled products of stainless steel, not further worked than hot-rolled, of a thickness of less than 4.75 mm, of a width of less than 600 mm 34.212 7220.20.00 Flat-rolled products of stainless steel, not further worked than cold-rolled (cold-reduced), of a width of less than 600 mm 34.23 7220.90.00 Flat-rolled products of stainless steel, of a width of less than 600 mm, other 34.24 7221.00.00 Bars and rods, of stainless steel, hot-rolled, in irregularly wound coils 34.25 7222.11.00 Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section 34.251 7222.19.00 Other bars and rods, in angles, shapes and sections including hexagonal sections, of stainless steel, not further worked than hot-rolled, of grades 420, 440, 17-4 and 15-5 34.26 7222.20.00 Bars and rods of stainless steel, not further worked than cold-formed or cold-finished 34.27 7222.30.00 Bars and rods of stainless steel, other 34.28 7222.40.00 Angles, shapes and sections of stainless steel 34.29 7223.00.00 35 7225.11.00 Silicon-electrical steel, grain-oriented, of a width of 600 mm or more 36 7225.19.00 Flat-rolled products of silicon-electrical steel, of a width of 600 mm or more, other than grain-oriented 36.1 7225.30.00 36.2 7225.40.00 36.21 7225.40.00.10 36.3 7225.50.00 36.4 7225.50.00.30 36.5 7225.50.00.40 Flat-rolled coils, sheets and plates of alloy steel, cold-rolled (cold-reduced), of grade 4130, with a width of 600 mm or more, of a thickness of at least 3.27 mm but not exceeding 3.38 mm, annealed 36.6 7225.91.00 36.61 7225.92.00 36.7 7225.99.00 Flat-rolled coils, sheets and plates of alloy steel, of grade ASTM A463 CQ T-125, with a width of 600 mm or more, plated or coated with aluminum or aluminum alloys 37 7226.11.00 Silicon-electrical steel, grain-oriented, of a width of less than 600 mm 38 7226.19.00 Silicon-electrical steel, non-oriented, of a width of less than 600 mm 38.001 7226.20.00 Flat-rolled products, of other alloy steel, of grades M2, M7, M42, 8620 or 6150, with a width of less than 600 mm 38.0011 7226.92.00 38.002 7226.99.00 38.01 7227.10.00 Bars and rods, of special bar quality, of other alloy steel (other than stainless steel), hot-rolled, in irregularly wound coils, with a diameter of at least 1 inch but not exceeding 10 inches, drawn or extruded of grades ASTM588, ASTM350 or SA350 (VAR- vaccum degassed) 38.011 7227.90.00.83 Bars and rods of other alloy steel, of special bar quality alloy steel, hot-rolled, in irregularly wound coils, of grades AISI 3130M, 4120M, 4320M or 4330M, of a diameter of 0.8125 inch but not exceeding 1.1250 inches, of a coil length of up to 65 inches 38.02 7228.30.00 38.021 7228.30.00.71 38.022 7228.30.00.72 Bars and rods of other alloy steel, of special bar quality, hot-rolled, of a diameter of at least 92.075 mm but not exceeding 152.000 mm, with a length of 7 772 mm 38.023 7228.30.00.73 38.024 7228.30.00.74 38.03 7228.40.00.90 Alloy steel forged bars and rods, vacuum degassed, annealed or quenched and tempered, or normalized and tempered, of grade AISI4130, 4140,4340, or 8620, of specifications ASTM A29, ASTM A322, ASTM A304 or ASTM A108, with a circular cross-sectional diameter of less than 8 inches or a rectangular cross-sectional thickness of less than 4 inches 38.04 7228.50.00 38.05 7228.50.00.90 38.06 7228.60.00 Bars or rods, of alloy steel, hot rolled or rough turned, vacuum degassed, annealed or quenches and tempered, or normalized and tempered 38.0601 7228.70.00.22 Wide flange H sections, of other alloy steel, not further worked than hot-rolled, cold-rolled, drawn or extruded, of specification ASTM A588 Grade B or ASTM A709 Grade 50W Type B (345W), of designation W16 × 45 (with a nominal depth of 16 inches and nominal weight of 45 pounds per foot), with a length of 12.19 m, uncoated 38.061 7301.10.00 38.0611 7302.10.00 38.062[Repealed, SOR/2026-154, s. 48] 38.063 7302.30.90 38.064 7302.40.00 38.065 7302.90.00 38.066 7304.19.00.79 Line pipes of a kind used for oil or gas pipelines, seameless, of carbon steel, of specification API 5L Grade X52 or ASTM A106 Grade B, with an external diameter of 508 mm, with a wall thickness of 26.1874 mm, uncoated 38.07 7304.19.00 Hydraulic line tube, of carbon steel, grade C1026, pressure rated at 3000 PSI, with 1.25 inch outer diameter by 0.120 inch wall thickness, of a length of 72 inches, zinc-plated 38.071 7304.31.00 38.0711 7304.39.00.70 Mechanical tubes and pipes, seamless, of carbon steel, of grade AISI 1026, of specifications ASTM A519 and ASTM A106 Grade B or C 38.0712 7304.41.00 Tubes, pipes and hollow profiles, seamless, other, of circular cross section, of stainless steel, cold-drawn or cold-rolled (cold-reduced), of a nominal pipe size of 2 inches or less 38.0713 7304.41.00.90 38.0714 7304.51.00.00 Mechanical tubing, other, of circular cross-section, seamless, of other alloy steel, cold-drawn, of grade AISI 4130, of specifications ASTM A519 and AMS 6736 38.072 7304.59.00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of other alloy steel, other 38.08 7304.90.00 38.081 7305.31.00.11 Other standard pipes, of iron or non-alloy steel, of grade 42, of specification ASTM A572, with a wall thickness of 25.4 mm, with an outer diameter of 2642.0 mm, with backing rings and grouting ports, with a polyurethane lining and coating 38.0811 7305.31.00.19 Pipes, longitudinally submerged arc welded, of carbon steel, of grade C, of specification ASTM A500, with an outer diameter of 457.2 mm or 508.0 mm, of a wall thickness of at least 6.35 mm but not exceeding 25.4 mm 38.082 7306.29.00 38.09 7306.29.00.49 Tubing of iron or steel, of a kind used in drilling for oil or gas, of an external diameter not exceeding 60.2 mm 38.1 7306.29.00.59 Tubing of iron or steel, of a kind used in drilling for oil or gas, of an external diameter of 60.3 mm 38.11 7306.29.00.69 Tubing of iron or steel, of a kind used in drilling for oil or gas, of an external diameter exceeding 60.3 mm but not exceeding 73 mm 38.12 7306.29.00.79 Tubing of iron or steel, of a kind used in drilling for oil or gas of an external diameter exceeding 73 mm 38.13 7306.30.00 38.14 7306.30.00.41 38.15 7306.30.00.49 38.16 7306.30.00.51 38.17 7306.30.00.59 Other tubes, of iron or non-alloy steel, drawn over mandrel, of grade 1026 and ST52.3, of specification ASTM A513 Type 5, of an outer diameter of at least 2.50 inches but not exceeding 5.25 inches, of an inner diameter of at least 1.25 inches but not exceeding 3.75 inches 38.18 7306.30.00.69 Tubes, pipes and hollow profiles, other, welded, of circular cross-section, of iron or steel, drawn over mandrel, of grade C1026 or ST52.3, of specification ASTM A513 or ASTM A519, of an inner diameter of at least 37.4 mm but not exceeding 151.9 mm, of an external diameter of at least 44.4 mm but not exceeding 177.8 mm, of a length of at least 152.4 mm but not exceeding 7 315.2 mm 39 7306.30.00.89 39.01 7306.40.00 39.011 7306.40.00.10 Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grades ASTM A269 and A213, of specification 3500SS1, of an external diameter of 9.52 mm or 12.7 mm 39.02 7306.40.00.20 39.03 7306.40.00.30 39.04 7306.50.00 39.1 7306.61.00 40 7306.61.00.39 40.01 7306.61.00.49 40.1 7307.21.00 Welded stainless steel fasteners (“weld studs”), cold-forged, threaded or unthreaded, tapped, flanged or unflanged, of a diameter of at least 2 mm but not exceeding 10 mm 40.11 7307.29 Stainless steel mechanical adapter, conforming to the standard ASME B31.3, with a 1.00-inch female precision-machined bayonet connection on one end and a 0.50-inch male precision-machined bayonet connection on the other, including clamp and O-ring 40.12 7307.29.99.00 Pipe fittings of tee shape, of stainless steel, of grade 316L, of specification ASTM F1545, with a 6-inch nominal diameter, with a length of at least 1 foot but not exceeding 10 feet, with forged lap-joint flanges, with a polytetrafluoroethylene lining 40.2 7307.91.00 41 7307.92.00 41.1 7307.93.00 Butt welding fittings, of forged iron or steel, of grades SA181-70 and SA105 42 7307.99.00 Other tube or pipe fittings of iron or steel 43 7308.10.00 43.01 7308.30.00.22 Doors for domestic garages, of iron or steel, sectional, vehicular, consisting of 4 to 10 panels of steel sheet, hot-dip galvanized, of specifications ASTM A924/A924M and ASTM A653/A653M, of a width of at least 1.83 m but not exceeding 12.24 m, of a height of at least 1.83 m but not exceeding 6.10 m, with a steel sheet thickness of at least 0.30 mm but not exceeding 0.86 mm 43.1 7308.30.00.28 Motor-operated (gear head) rolling industrial galvanized steel service door, of specification ASTM 653, with coating of galvanized zinc or zinc-iron alloy (galvannealed) by hot-dip process, with slat and hood finish 43.11 7308.40.00 Steel overhang work platform attachment for trucks, with a 16-foot work platform 43.111 7308.40.00.00 43.12 7308.90.00 43.2 7308.90.00.95 Grills, air diffusers or ducts of iron or steel 43.201 7308.90.00.99 43.3 7309.00.00 Reservoirs, tanks, vats and similar containers for any material other than compressed or liquefied gas, of iron or steel, of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 43.4 7310.10.00 44 7310.21.00 Cans which are to be closed by soldering or crimping, of iron or steel, of a capacity of less than 50 litres, whether or not lined or heat-insulted, but not fitted with mechanical or thermal equipment 44.01 7310.29.00.20 Cans, other than cans which are to be closed by soldering or crimping, of iron or steel, of a capacity of less than 50 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 44.02 7311.00.00 Containers for compressed or liquefied gas, of iron or steel 44.03 7312.10.00 Stranded wire, ropes, and cables, of iron or steel, not electrically insulated 44.04 7314.20.00 Modular welded wire mesh security walls of steel, with steel tube posts and hinged doors, powder-coated finish 44.041 7314.50.00.00 Galvanized steel sheet processed into mesh, of grade Commercial Steel (CS) or Forming Steel (FS) Type B, of specification ASTM A653/A653M, hot-dipped and zinc-coated with coating weights of G30 or G40 44.05 7317.00.00 44.051 7318.11.00 44.06 7318.15.00 44.061 7318.15.00.42 44.07 7318.15.00.45 44.08 7318.15.00.49 44.081 7318.16.00 44.09 7318.16.00.90 44.091 7318.19.00.00 44.1 7318.21.00 44.101 7318.22.00.00 44.1011 7318.24.00.00 Cotter pins, of carbon steel, with a diameter of 0.125 inch, with a length of 2.00 inch length, zinc-plated 44.1012 7318.29.00 44.1013 7320.90.00 Disc springs, of carbon steel, formed as conical spring washers, with a thickness of at least 0.2 mm but not exceeding 3.5 mm, with an outer diameter of at least 1.5 mm but not exceeding 180 mm 44.1014 7322.19.00 Steel furnace bodies and combustion chamber components used in waste-oil heating units, of welded or formed carbon-steel panels, with openings for fuel delivery, air intake, exhaust and electrical connections, with internal brackets and mounting points for burner and control assemblies 44.102 7322.90.10 44.1021 7322.90.90.00 Power exhausters or induced draft blowers, for gas-fired unit heaters, used to vent flue gases 44.1022 7325.10.00 Grey cast iron catch basin frames, trench frames, trench covers, or trench grates, of specification ASTM A48 Class 35B, 40, 45 or 50, sand cast and shot-blasted with machined surfaces 44.1023 7325.10.00.90 Other bars and rods, of cast iron, of grade G2, of specification ASTM A48 Class 40 44.103 7326.11.00 44.11 7326.19.10 Flanged wellhead tubing heads and flanged casing head spools, in the rough, for use in the manufacture of wellhead tubing heads or casing head spools 44.12 7326.19.90 Other articles of iron or steel, forged or stamped, but not further worked, other than grinding balls and similar articles for mills 44.1201 7326.20.00 Wire racks, of steel, of a length of at least 9 cm but not exceeding 37 cm, of a width of at least 12 cm but not exceeding 37 cm and of a height of at least 20 cm but not exceeding 75 cm 44.1202 7326.90.10 Pressure-vessel steel heads, of grade SA414-G or SA516-70, with diameters of 24 inches or 30 inches, for use as end closures in pressure vessels 44.121 7326.90.90 44.13 7326.90.90.90 44.14 7601.20.00 Round bars of aluminum alloy, forge quality, of a diameter of at least 1 inch but not exceeding 12 inches, of grade 2014, 2219, 6061, 7075, or 7175, of specifications SAE-AMS-QQ-A-367 and QQ-A-225 44.15 7601.20.00.90 Aluminium alloys scrap ingot of casting alloys 380 or 390 44.16 7604.10.00.30 Aluminum alloy extrusions, of a cross-section, with retaining channels, with a length of 10 feet, of a height of at least 0.75 inch but not exceeding 2.50 inches, anodized or painted finish 44.161 7604.21.00 44.17 7604.29.00 Other aluminum bars, rods and profiles, of alloy 2011, 3003, 5052, 6061 or 7075 44.18 7604.29.00.30 44.19 7606.11.00 Aluminum plates, sheets and strip, of grade 6061, 2011, 7075, 3003 and 5052, with a thickness exceeding 0.2 mm 45 7606.12.00 45.001 7606.12.00.11 45.01 7606.12.00.12 Aluminum plates, sheets and strip, rectangular (including square), of aluminum alloys, not clad, of a thickness of 7 mm or more 45.02 7606.12.00.20 45.021 7606.92.00 Aluminum sheet, non-rectangular, in coils, of grade AA3105, of specification ASTM B209, of a width of 2.5 inches but not exceeding 24.0 inches, of a thickness of 0.381 mm but not exceeding 0.508 mm, coated with a polyester paint 45.0211 7607.11.00 Aluminum foil, of alloy 1100, of specification ASTM B209, with a thickness not exceeding 0.2 mm, not backed, rolled but not further worked 45.022 7607.11.00.10 Aluminum foil, rolled but not further worked, of alloy 1100-O or 8011-H22, of a thickness (excluding any backing) not exceeding 0.2 mm, with a bright surface finish 45.023 7607.20.00 Adhesive aluminum foil sealing tape, in rolls or pre-cut sheets 45.024 7607.20.00.10 45.03 7608.20.00 45.04 7609.00.00 45.05 7610.10.00 45.051 7610.10.00.20 Aluminum windows, as complete units with window glass and extruded aluminum frames, with a frame depth of 3.25 inches, with a frame sill wall thickness of 0.125 inch, fixed or operable 45.052 7610.90.90.10 Aluminum roof panels, with expanded polystyrene (EPS) foam core, with a length of 1.5 inches or 6 inches, with a width of 48 inches, with a height of 120 or 288 inches 45.06 7610.90.90.90 45.07 7616.10.00 45.08 7616.99.90 45.0801 7616.99.90.29 Aluminum castings, of alloy A383, with a wall thickness of 2.3 mm, with a depth of at least 457.2 mm but not exceeding 508.0 mm, with a length of at least 457.2 mm but not exceeding 914.4 mm 45.081 7616.99.90.90 45.09 8207.13.00 Rock drilling or earth boring tools with working part of cermets, and bits and parts 45.1 8207.19.00 Drill bits, drill bit bodies, rock drilling and earth boring tools, including parts 45.101 8207.40.00.20 Combined tap and reamer with pilot, 0.5-13 UNC thread, class 2B tolerance, with three flutes 45.102 8209.00.00 45.11 8308.20.00 Welded metal refractory fasteners of mild steel or stainless steel, “refractory anchors”, cold forged or hot forged, unthreaded, headed or unheaded, tapped, with or without a collar. stamped, formed, cut, flanged or un-flanged, of a diameter of at least 2 mm but not exceeding 19 mm 45.12 8309.90.00 45.13 8311.30.00 Solder, welding wire, braze discs and coated braze rods 45.14 8418.69.90.80 Refrigeration units, of a kind used for trucks, trailers or vans 45.15 8425.42.00 Hydraulic jacks customized for above ground tanks 46 8517.69.00 Machines for the reception, conversion and transmission of voice: talk through units (TTU) that are UL-listed and designed to be mounted on a countertop or window to allow for communication through glass or another barrier 47 9504.30.00.80

Goods Column 1 Column 2 Column 3 Item Tariff Classification Number Goods Expiry date 1 7209.16.00 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not further worked than cold-rolled or cold-reduced, not clad, plated or coated, in coils, of a thickness exceeding 1 mm but less than 3 mm, of specification ASTM 1045, 1050, 1055 or 1067-1070 March 13, 2026 2 7209.17.00 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not further worked than cold-rolled or cold-reduced, not clad, plated or coated, in coils, of a thickness of at least 0.5 mm but not exceeding 1 mm, of specification ASTM 1045, 1050, 1055 or 1067-1070 March 13, 2026 3 7211.23.00 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated, not further worked than cold-rolled or cold-reduced, containing by weight less than 0.25% carbon, of specification ASTM 1045, 1050, 1055 or 1067-1070 March 13, 2026 4 7211.29.00 March 13, 2026 March 1, 2027 4.1 7226.91.00 Flat-rolled products of other alloy steel, not further worked than hot-rolled, of grade SA414-G or SA516-70, of a width of less than 600 mm May 28, 2027 4.2 7226.92.00 Flat rolled products, of carbon steel, in coils, not further worked than cold-rolled (cold-reduced), of grade 006/1010, of specification ASTM A1008-01, of a thickness of at least 2.159 mm but not exceeding 2.286 mm, with a width of 147.32 mm March 1, 2027 5 7304.41.00 Alloy 800 stainless steel cylindrical shape seamless tubes, cold drawn with a wall thickness of at least 0.054 inch but not exceeding 0.109 inch, with outer diameter 0.50 inch, 1.00 inch or and 1.25 inches and length of at least 215.38 inches but not exceeding 675.00 inches May 17, 2025 5.1 7308.40.00 Steel foundation repair bracket system, with a face plate with a width of 9.875 inches and a length of 13 inches, with a steel pier pipe and a steel pier sleeve October 31, 2025 6 7308.90.00 March 5, 2027 7 7308.90.00.99 Redirective, non-gating crash cushion assembly to shield fixed roadside objects, consisting of a modular framework of steel beam panels enclosing a series of crushable energy-absorbing cartridges and a self-supporting plastic nose March 5, 2027 8 7318.16.00.85 April 2, 2026 8.1 7606.12.00 Aluminum sheets, in coils, of alloy AA5052-H32, of specification ASTM B209, of a thickness of at least 2.184 mm but not exceeding 2.337 mm, with a width of 522.427 mm March 13, 2027 9 7606.12.00.11 H21 recycled aluminum coil, conversion coated on both sides and a thickness of 0.027 inch March 5, 2027

Goods Column 1 Column 2 Column 3 Column 4 Item Business Number Tariff Classification Number Goods Conditions 1 100326198NP0004 4407.14.00 Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, untreated structural timbers of hem-fir (Western hemlock) (Tsuga heterophylla) and fir (Abies spp.) 4407.19.00 Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, untreated structural timbers of other coniferous species 1.1 100444223 4410.11.00.00 Particle boards of wood or of other ligneous materials, of grade M2 Industrial, of a thickness of at least 0.625 inch but not exceeding 1.000 inch, of a width of at least 49 inches but not exceeding 61 inches of a length of at least 85.0 inches but not exceeding 113.5 inches 2 100850635 0813.50.00 Mixed nuts, in shell, consisting of almonds, walnuts, hazelnuts, and pecans 2008.19.90 2.1 101097699 4819.40.00.90 Paper mailers, of recyclable paper, with an external length of at least 12 inches but not exceeding 14 inches, with an external width of at least 9 inches but not exceeding 18 inches For sale to company with business number 850246604 3 101569663RM0002 1006.30.00.91 Semi-milled or wholly milled long grain white rice, whether or not polished or glazed 4 101803575RM0001 4012.90.90.30 Tire treads Imported for sale to company with business number 122644537 4.1 101811057 8418.10.20 Imported for sale to the Centre d'acquisitions gouvernementales 8418.10.90 Imported for sale to the Centre d'acquisitions gouvernementales 8418.30.90 Imported for sale to the Centre d'acquisitions gouvernementales 8418.40.10 Imported for sale to the Centre d'acquisitions gouvernementales 8418.40.90 Imported for sale to the Centre d'acquisitions gouvernementales 8418.50.10 Imported for sale to the Centre d'acquisitions gouvernementales 8418.69.90 Imported for sale to the Centre d'acquisitions gouvernementales 5 101928125RM 0802.99.00 Raw pecans, chopped 6 101963361RM0001 4409.29.10 Unfinished solid white oak wood boards, either quarter sawn or live sawn, with tongue and groove edges, with plank widths of at least 4 inches but not exceeding 10 inches, for further processing into custom-finished wood flooring 4409.29.90 Unfinished solid Hickory (Carya ovata) wood boards, live sawn, with tongue and groove edges, plank widths of at least 4 inches but not exceeding 6 inches, for further processing into custom-finished wood flooring 7 103609160RM0001 4202.92.90 Holster of molded plastic with or without a spare cartridge for handheld conducted energy devices 6211.33.00 Training suit made up of hook and loop panels, designed for use with handheld conducted energy device training cartridges that deploy hook-and-loop fastener darts 8517.62.00 9304.00.90 Handheld conducted energy devices 9306.30.90 Cartridges for handheld conducted energy devices formed from plastic, containing metal probes connected to 25 inches wires that are deployed by a compressed nitrogen charge 7.1 1037779815RM0001 8418.69.90.90 Imported for sale to company with business number 105597850 8 104275359RT0001 4819.10.00 Corrugated packaging and raw materials used for further processing into specific packaging 9 104671094RT0007 8307.10.00 Imported for sale to company with business number 872894332 8418.50.10 Imported for sale to company with business number 872894332 8419.81.00.20 Imported for sale to company with business number 872894332 8419.81.00.90 Imported for sale to company with business number 872894332 9403.20.00.99 Imported for sale to company with business number 872894332 10 104813662RM0001 1006.30.00 Semi-milled or wholly milled rice, whether or not polished or glazed, of the following types: 11 105604938RM0001 8418.50.10 Imported for sale to company with business number 872894332 12 121054431RM0001 8516.50.00 Imported for sale to company with business number 872894332 9403.20.00.20 Imported for sale to company with business number 872894332 12.1 121381677RM001 3304.10.00 3304.20.00 3304.30.00 3304.91.00 3304.99.90.20 3304.99.90.90 3307.10.00 3401.11.90 3506.10.00 4819.10.00.90 4819.20.00.90 13 121478390RC0001 4823.69.00.90 Custom paperboard trays 14 122463953RM0001 8418.69.90 Imported for sale to company with business number 872894332 8419.81.00.90 Imported for sale to company with business number 872894332 15 122574585 3925.90.00.20 Polymer matrix of high-density polyethylene netting, of specification ASTM D-638, with 0.100 inch thick strands and 0.150 inch spacing between strands, of a roll length of at least 100 feet but not exceeding 150 feet, of a roll width of at least 12 inches but not exceeding 60 inches Imported for sale to the Ontario Ministry of Transportation (MTO) 15.1 126343326RM0001 9506.99.00.60 Imported for sale to company with business number 122617160 16 128522992BN0001 8309.90.00 Can lids 16.1 131927808RM0001 4407.19.00.99 Imported for sale to the ministère des Transports et de la Mobilité durable du Québec to fulfill contracts 851011526, 851025982, 851028206, 851010466, 851028169 Imported for sale to company with business number 1140169609 to fulfill contract 22401 4418.99.00 Imported for sale to the ministère des Transports et de la Mobilité durable du Québec to fulfill contracts 851011526, 851025982, 851028206, 851010466, 851028169 Imported for sale to company with business number 1140169609 to fulfill contract 22401 17 133405829RP0001 1701.14.00 Organic light brown sugar 1701.99.90.30 Finely milled organic cane sugar, blended with organic starch 1703.10.90 18 133586628RM0001 8309.90.00 Stoppers, caps and lids of base metal 19 140851943RC0003 4408.90.00 Veneer sheets, of conifers, of a thickness of 1.6 mm or 2.1 mm 20 143460764RM0001 4407.11.00.23 Green and dry wood, sawn boards, of white pine, of grade stained, clear, premium, or select, of a width of at least 3 feet but not exceeding 10 feet, of a length of at least 4 feet but not exceeding 16 feet 21 718866494RP0001 3918.90.10 Ethylene vinyl acetate/polyethylene (EVA/PE) foam sheet, with a thickness of 6 mm, with a width of 40 inches and length of 80 inches, with high-performance pressure-sensitive adhesive (PSA 9077) coating 22 731056107RT0001 8806.23.00 Unmanned aircraft, for remote-controlled flight only, with maximum take-off weight at least 7 kg but not exceeding 25 kg Goods imported to fulfill contract CW2384495 22.1 754556470 7110.11.00 7110.19.00 7112.99.00 22.2 819576968RM0001 and 759532500 8207.20.00 Steel dies, of a grade H13, with at least 1 but not exceeding 8 cavities, with a diameter of at least 10 inches but not exceeding 18 inches, and with a length of at least 3 inches but not exceeding 10 inches 23 770095529RM0001 8418.69.90 Imported for sale to company with business number 872894332 23.01 770806891 3304.99.90 Imported for sale to company with business number 861243673 or 105216170 23.1 771066271 8302.50.00 Imported for sale to company with business number 896718327 or 105195598 8517.62.00 Imported for sale to company with business number 896718327 or 105195598 9401.61.90 Imported for sale to company with business number 896718327 or 105195598 9401.71.90 Imported for sale to company with business number 896718327 or 105195598 9401.79.10 Imported for sale to company with business number 896718327 or 105195598 9401.79.90 Imported for sale to company with business number 896718327 or 105195598 9401.80.90 Imported for sale to company with business number 896718327 or 105195598 9403.10.00 Imported for sale to company with business number 896718327 or 105195598 9403.30.00 Imported for sale to company with business number 896718327 or 105195598 9403.60.90 Imported for sale to company with business number 896718327 or 105195598 9403.70.90 Imported for sale to company with business number 896718327 or 105195598 9403.89.90 Imported for sale to company with business number 896718327 or 105195598 9403.91.00 Imported for sale to company with business number 896718327 or 105195598 9403.99.00 Imported for sale to company with business number 896718327 or 105195598 23.2 773379367 8419.11.00 Imported for sale to company with business number 868944166 24 776853285 9506.91.00.90 Articles and equipment for general physical exercise 24.1 797131323RM0001 3304.99.90.10 Broad-spectrum zinc oxide-based sunscreen lotions and sticks Imported for sale to company with business number 137466199 or 882187321 25 802556332RM0001 4819.20.00 Non-corrugated cardboard boxes with pre-printed graphic design 26 805038247RT0001 4408.90.00 Green wood, veneer, of red alder, white oak, douglas fir, or douglas fir VG, of a width of at least 5.5 feet but not exceeding 12 feet, of a length of at least 86 feet but not exceeding 144 feet, of premium slicing grade 27 810199612RM0001 1806.90.90.19 Chocolate chips of the following types: Imported for sale to company with business number 137466199 RT0001 or 122235922RT0001 28 824659155RM0001 1302.19.00.90 Konjac flour, of grade G4 29 825387335RT0001 0805.10.00 Fresh oranges 0805.40.00 Fresh grapefruit 0805.50.00 Fresh lemons and limes 30 827622549 4407.91.00.11 Green and dry wood, sawn boards, of red oak, of grade 3A, of a thickness of 1 inch, of a width of at least 4 inches but not exceeding 30 inches, of a length of at least 4 feet but not exceeding 16 feet 4407.91.00.91 Green and dry wood (sawn boards) of white oak, of grade 1C of a thickness of 1 inch (4/4), with a width of at least 4 inches but not exceeding 30 inches, with a length of at least 4 feet but not exceeding 16 feet 4407.99.00 Green and dry wood (sawn boards) of hickory or walnut, of grade 1C, with a thickness of 1 inch (4/4), with a width of at least 4 inches but not exceeding 30 inches, with a length of 4 feet but not exceeding 16 feet 4411.13.00.90 Medium-density fiberboard, of a thickness of at least 5 mm but not exceeding 9 mm, of a width of at least 4 feet but not exceeding 16 feet, of a length of at least 4 feet but not exceeding 30 feet 31 833044035RC0001 0805.10.00.10 Oranges (Valencia variety), maximum size 110 mm, minimum size 60 mm 0805.22.00 Clementines (Corsica variety), certified organic, maximum size 70 mm, minimum size 45 mm 0805.40.00.10 Pink grapefruit, maximum size 110 mm, minimum size 70 mm 0805.50.00 Lemons (Eureka variety) and limes (Latifolia variety), certified organic, with a maximum size 110 mm for lemons and 70 mm for limes, and a minimum size of 55 mm of lemons and 45 mm for limes 31.1 841175953 4418.29.00.12 Doors, of wood and wood particles, 20-minute fire-rated, machined for locks, with a width of 36 inches, a height of 80 inches, a thickness of 1.75 inches, and plastic laminate surface finish Imported for sale to company with business number 893119156 32 843741349MC0002 4407.91.00 Wood of oak rough sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, kiln dried, of a length of at least 8 feet but not exceeding 16 feet, of nominal sizes 4/4 (1 inch), 5/4 (1.25 inches), 6/4 (1.5 inches) and 8/4 (2 inches) 4407.93.00 Wood of maple rough sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, kiln dried, of a length of at least 8 feet but not exceeding 16 feet, of nominal sizes 4/4 (1 inch), 5/4 (1.25 inches), 6/4 (1.5 inches) and 8/4 (2 inches) 4407.97.00 Wood of poplar and aspen rough sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, kiln dried, of a length of at least 8 feet but not exceeding 16 feet, of nominal sizes 4/4 (1 inch), 5/4 (1.25 inches), 6/4 (1.5 inches) and 8/4 (2 inches) 4407.99.00 Wood rough sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, kiln dried, of a length of at least 8 feet but not exceeding 16 feet, of nominal sizes 4/4 (1 inch), 5/4 (1.25 inches), 6/4 (1.5 inches) and 8/4 (2 inches) 33 844690347RM0001 6307.90.99.90 First aid tourniquet, one-handed application, consisting of a textile strap with a windlass (plastic or aluminum) or ratcheting self-locking mechanism From March 4, 2025 to July 31, 2025, for imports for sale to York Region Community and Health Services. or from March 4 to April 30, 2026, for imports for sale to Government of Saskatchewan 34 849922893RT0001 1006.30.00 Semi-milled or wholly milled rice, whether or not polished or glazed 35 858245772RM0001 8419.81.00.90 Imported for sale to company with business number 872894332 35.1 861857639 9401.80.10 9403.70.10 9503.00.10 9503.00.90 9506.99.00 35.2 863010732RM0002 9506.29.00.00 Imported for sale to company with business number 122617160 9506.99.00.40 Imported for sale to company with business number 122617160 36 864676531RM0001 8419.81.00 Imported for sale to company with business number 872894332 8516.72.90 Imported for sale to company with business number 872894332 36.1 871602314 5703.39.10.90 Imported for sale to company with business number 862155827 37 87965143RM0001 1902.19.23.30 Unprepared pasta of the following types: 37.1 884258625 9504.50.00 Imported to fulfill quote 3124192 9504.90.00 Imported to fulfill quote 3124192 38 891093452RM0001 3924.10.00 Imported for sale to company with business number 872894332 9403.70.90 Imported for sale to company with business number 872894332 39 891577132RT001 0207.14.91 Boneless or bone in frozen chicken cuts and offal 1602.32.93 Frozen cooked or processed chicken parts, bone in or boneless 40 892695016RC0001 8418.69.90.70 Refrigeration condensing units 41 893039321RM0001 3923.21.90.90 Printed polyethylene bags with a bottom gusset, butterfly vents and laser perforation 4819.20.00.90 Cartons, boxes and cases, folding, of non-corrugated paper or paperboard 42 893736447RC0003 1006.30.00 Non-aromatic rice varieties of either long or medium grain, without additives 43 894634112 3925.10.00.00 Imported for sale to company with business number 887258960 8418.69.90.40 Imported for sale to company with business number 887258960 8516.10.90 Imported for sale to company with business number 887258960 44 896297645RM0001 3925.10.00 Agricultural water tanks, of medium-density polyethylene with UV inhibitors, with translucent walls for level visibility and US gallon indicators, designed for liquids with a specific gravity of up to 1.7 relative to water at 4°C, equipped with polymer baffles for fluid control, with molded-in legs and band locators for tie-down, of a capacity of 3250 US gallons, 3750 US gallons or 4250 US gallons 45 898667639RM0001 8202.31.00 8205.59.90 Snap to connect release forks, deburring blades, swivel sockets and hose pusher bars of chrome‑plated high‑carbon steel, for hydraulic service 8207.20.00 Two‑piece collet sets of hardened alloy‑steel cages, for positive-stop crimping tools, designed for nominal diameters of at least 1/4 inch but not exceeding 2 inches, with precision spacer rings 8207.30.00.20 Heavy‑duty collets and spacer rings of hardened high-alloy steel, for four‑wire spiral hoses and fittings, of sizes rated for crimp forces achieving at least 35 mm but not exceeding 42 mm, rated for operating crimp pressures of approximately 62 MPa 8207.30.00.90 Ancillary crimp tooling including die rings, adapters, storage cages, pusher blocks, used in hydraulic crimping operations, of through‑hardened high‑alloy tool steel 8208.20.00 Circular cutting media for hydraulic‑hose preparations, with 7 inch or 14 inch diameter blades and reinforced cut‑off wheels, high‑speed‑steel bodies with hollow‑ground, scalloped teeth or bonded‑abrasive rims, and 25.4 mm arbor hole, compatible with industrial hose-cutting saws 9403.20.00.99 Powder‑coated mild‑steel storage for crimp tooling and hose assembly components, with a 15‑drawer die‑ring cabinet with foam indexing and single‑door hose‑component cabinet, supplied with M8 anchoring hardware 46 899505945 0404.10.10.00 0901.21.00 0901.22.00.00 0904.12.10.00 0910.12.00.00 1101.00.20.00 1512.19.19.00 1602.31.11.90 1602.31.92.00 1602.32.11.20 1602.32.94.00 1602.32.95.00 1703.10.90.00 1704.90.90.20 1806.90.90.99 1902.19.21.30 1902.19.22.90 1902.30.20.00 1902.30.31 1902.30.40 1905.90.51.00 2103.10.00.00 2103.20.10.00 2103.20.90.92 2103.30.20.00 2103.90.10.20 2104.10.00.00 2106.90.39.10 2106.90.94.00 2106.90.95.90 2202.10.00.90 3923.21.90.40 3923.21.90.90 3924.10.00.99 4819.10.00.90 4819.20.00.10 4820.90.00.00 6307.90.99.90 7229.90.00.90 7310.21.00.10 7318.15.00.42 7318.21.00.00 7323.93.90.90 8203.10.00.00 8204.11.00.40 8204.12.00.90 8204.20.00.20 8205.20.90.00 8205.40.00.00 8205.59.90.00 8205.70.90.00 8425.42.00.00 8443.32.00.90 8467.29.00.11 8471.60.00.90 8513.10.10.00

Goods Column 1 Column 2 Column 3 Column 4 Column 5 Item Business Number Tariff Classification Number Goods Period Conditions 1 100086768RC0001 7208.26.00 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 7208.27.00 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 7208.38.00.10 From March 13, 2025 to December 31, 2026 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 7208.39.00 Coil that has all of the following characteristics: Grade: HR270LA Specification: GMW3032M-ST-S Thickness: 0.091 inches Width: 24.016 inches Length: 9.646 inches Coating: P&O From March 13, 2025 to December 31, 2027 7208.53.00 Blank, cut to length, that has all of the following characteristics: Grade: HR270LA Specification: GMW3032M-ST-S Thickness: 0.118 inches Width: 24 inches Length: 86.85 inches Coating: P&O From March 13, 2025 to December 31, 2027 7209.16.00.90 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2026 7210.30.00 Blank, cut to length, that has all of the following characteristics: Grade: CR180B2 Specification: GMW3032M-ST-S Thickness: 0.059 inches Width: 32.677 inches Length: 14.094 inches Coating: EG 70G70G From March 13, 2025 to December 31, 2027 7210.49.00.60 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 7210.49.00.70 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to January 2, 2027 7211.19.00.10 Coil that has all of the following characteristics: Grade: CR270LA Specification: GMW3032M-ST-S Thickness: 0.079 inches Width: 22.598 inches Length: 3.28 inches From March 13, 2025 to December 31, 2027 7211.19.00.90 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 7211.23.00 Coil that has all of the following characteristics: Grade: CR3 Specification: GMW2M-ST-S Thickness: 0.04 inches Width: 13.1 inches Length: 8.86 inches From March 13, 2025 to December 31, 2027 7212.20.00.30 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 7212.30.00.30 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 7212.30.00.40 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 2 100101070RC 3924.90.00.99 Elevated pet food bowl frame of plastic, with adjustable legs and stainless steel bowl inserts From March 6, 2025 to April 10, 2025 3 100124221RM0002 7309.00.00.70 2,500 US gallon water tanks of carbon steel, designed for non-pressurized liquid storage From March 13, 2025 and March 27, 2025 3.1 100180868 7308.30.00 High-speed, low headroom rapid roll overhead doors comprised of anodized aluminum rigid double-wall panels, with a width of 120 inches, with a height of at least 81 inches but not exceeding 83 inches, with powder-coated or galvanized steel door frame components 7610.10.00 High-speed, low headroom rapid roll overhead doors comprised of anodized aluminum double-wall slats, with a width of 118 inches, with a height of 90 inches, with galvanized steel frame components 3.2 100682244 7606.12.00 Aluminum plates, sheets and strip, of aluminum alloy, of grade 3105 or 3004, with a hardness of H25, with a thickness of at least 0.305 mm but not exceeding 1.600 mm, with a width of at least 2.875 inches but not exceeding 24.000 inches, whether uncoated or with a polyester and siliconized modified polyester (SMP) coating 3.21 100784842RM0001 9504.30.00 From March 4, 2025 to April 30, 2025 3.3 100773043 RM0001 7318.15.00.49 Steel wheel studs, zinc-plated and sealed, of Grade 8 or 8.2; with a thread diameter of at least 0.5 inches, 16-20 threads (unified fine threads per inch); class 2A thread length of at least 1.75 inches but not exceeding 4.00 inches From March 4, 2025 to October 1, 2026 4 101400760RT0001 7218.99.00.90 Stainless steel in ingots or other primary forms: semi-finished products of stainless steel 7219.21.00 Flat-rolled products of stainless steel, of a width 600 mm or more, not further worked than hot-rolled, not in coils, of a thickness exceeding 10 mm 7220.11.00 Hot-rolled stainless steel plate, of a width of less than 600 mm , of a thickness of 4.75 mm or more 7220.20.00 Flat-rolled products of stainless steel, not further worked than cold-rolled or cold-reduced, of a width of less than 600 mm 7222.11.00.91 Hot-rolled stainless steel bars, round, of a diameter of 25 mm or more 7222.19.00.11 Hot-rolled stainless steel flat bars, of a diameter of 25 mm or more 7222.19.00.29 Hot-rolled stainless steel bars, of rectangular cross section 7222.20.00 Cold-formed or cold-finished stainless steel bars, of rectangular cross section 7222.30.00 Other bars and rods of stainless steel: angles, shapes and sections of stainless steel 7222.30.00.30 Other bars and rods of stainless steel: angles, shapes and sections of stainless steel, high nickel alloy 7228.50.00.90 Other bars and rods of solid alloy steel, not further worked than cold-formed or cold-finished 7228.60.00 300M AMS 6419 alloy steel round bars 7326.19.90 Steel forgings 7326.90.90.90 Open-die forged steel plate 7604.29.00 Aluminum alloy rods and bars 7606.12.00 Aluminum alloy plate, not clad 7608.20.00 Aluminum tubes and pipes, of aluminum alloys 7616.99.90.29 Aluminum castings 7616.99.90.30 Aluminum forgings 4.1 102177318 9401.31.10 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9401.39.10 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959. 9401.41.00 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959. 9401.49.00 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9401.52.10 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9401.52.90 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9401.53.10 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9401.53.90 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9401.59.10 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9401.59.90 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9401.61.10 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9401.61.90 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9401.69.10 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959. 9401.69.90 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9401.71.10 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9401.71.90 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9401.79.10 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9401.79.90 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9401.80.10 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9401.80.90 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9403.10.00 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9403.20.00 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9403.30.00 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9403.40.00 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9403.50.00 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9403.60.10 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9403.60.90 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9403.70.10 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9403.70.90 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9403.82.11 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9403.82.19 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9403.82.90 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9403.83.11 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9403.83.19 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9403.83.90 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9403.89.11 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9403.89.19 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 9403.89.90 From April 1, 2025 to September 1, 2025 Imported for sale to company with business number 103490959 4.11 102224185 3304.99.90.20 3304.99.90.90 3305.10.00.00 3305.90.00.00 3306.10.00.90 3307.30.00.00 3307.49.00.00 3401.11.90.00 3401.20.90.10 3401.20.90.90 3401.30.00.00 3923.21.90.10 3923.21.90.90 3923.29.90.00 3924.10.00.11 3924.10.00.91 3924.10.00.96 3924.10.00.99 3924.90.00.10 3924.90.00.51 3924.90.00.92 3924.90.00.99 4202.29.00.00 4818.10.00.00 4818.20.00.10 4818.20.00.20 4818.30.00.00 4819.30.00.10 4819.30.00.90 4819.40.00.90 4820.10.00.00 4820.90.00.00 4823.69.00.10 4823.69.00.90 4911.99.00.90 5703.21.00.00 5703.29.90.00 5703.39.10.90 5703.39.90.10 5703.90.90.00 6208.91.00.00 6302.22.00.00 6302.31.00 6302.32.00 6302.53.00 6302.60.00.10 6302.60.00.30 6302.60.00.90 6303.92.90.10 6303.92.90.90 6304.19.00.00 6304.93.90.00 6307.90.99.90 6912.00.90.20 7013.28.00.00 7013.37.00.00 7013.49.00.90 7310.10.00.10 7310.10.00.90 7323.93.10.00 7323.93.90.90 7323.99.00 7326.20.00.00 7326.90.90 7615.10.00.90 8205.51.90.00 8301.60.00.00 8302.20.00.90 8302.41.90.41 8302.50.00.10 8302.50.00.90 8418.21.00.91 8516.79.90.00 8517.18.00.99 8518.30.90.10 9401.79.10.00 9403.20.00.10 9403.20.00.60 9403.20.00.70 9403.20.00.99 9403.60.10.99 9403.70.90.00 9403.99.00.21 9404.21.00.00 9404.29.00.00 9404.40.00.11 9404.40.00.12 9404.40.00.19 9404.40.00.99 9404.90.10.31 9404.90.10.39 9404.90.10.41 9404.90.10.49 9404.90.10.50 9404.90.90.29 9404.90.90.40 9603.90.90.00 4.12 102441441 7208.51.00 Flat-rolled products, of carbon steel, in plates, hot-rolled, of grade 1010, with a thickness of 1.25 inches, a width of 88 inches, a length of 288 inches 4.13 102511441 7317.00.00.00 Steel nails, ring shank, hot-dip galvanized, of a length of 1.5 inches, with a head diameter of 0.375 inch 4.2 102608270 9406.20.00 From March 19, 2025 to August 31, 2025 Imported for sale to company with business number 138910021 4.21 103510566 7216.21.00.10 From March 13, 2025 to December 31, 2027 For sale to company with business number 757303755 or 795006428 7216.40.00 From March 13, 2025 to December 31, 2027 For sale to company with business number 757303755 or 795006428 7306.30.00.41 From March 13, 2025 to December 31, 2027 For sale to company with business number 757303755 or 795006428 7306.61.00.39 From March 13, 2025 to December 31, 2027 For sale to company with business number 757303755 or 795006428 4.3 103615142RM0001 9406.90.90 Prefabricated modular building components, in wall, ceiling, door and floor sections, of steel, with a thickness of at least 4 inches but not exceeding 10 inches, a width of at least 5 inches but not exceeding 60 inches, and a length of at least 84 inches but not exceeding 160 inches From August 1, 2025 to September 1, 2025 Imported for sale to company with business number 808589568 or 723985719 5 104671094RT0007 7324.10.00.10 From March 13, 2025 to October 31, 2025 Imported for sale to company with business number 872894332 7324.10.00.90 From March 13, 2025 to October 31, 2025 Imported for sale to company with business number 872894332 5.01 104681804 7601.20.00.29 Ingot bars of aluminum, of alloy A201.1, 319.1, 535.2, 713.1 or A360.1 5.1 104708409RM0013 and 104708409RM0025 7208.27.00 Flat-rolled products of carbon steel, in coils, hot-rolled, pickled and oiled of grade JIS G3113 SAPH 440, of a width of 600 mm or more, with a thickness of at least 2.26 mm but not exceeding 2.30 mm From March 4, 2025 to December 31, 2026 Imported for sale to company with business number 846170850 7209.16.00 Flat-rolled products of carbon steel, in coils, not further worked than cold-rolled (cold reduced), of grade JIS G3135 SPFC 440, of a thickness of at least 1.32 mm but not exceeding 1.48 mm, with a width of 600 mm or more, uncoated From March 4, 2025 to December 31, 2026 Imported for sale to company with business number 846170850 7212.30.00.30 Flat-rolled products, of iron or non-alloy steel, in coils, ribbon wound, of a thickness of at least 0.7366 mm but not exceeding 0.7874 mm, with a width of 31.75 mm, otherwise plated or coated with zinc 7212.40.00.90 Flat-rolled products, of iron or non-alloy steel, in coils, ribbon wound, of a thickness of at least 0.635 mm but not exceeding 1.1176 mm, of a width of at least 12.7 mm but not exceeding 50.8 mm, painted, varnished or coated with plastics 7225.30.00 Flat-rolled products of alloy steel, in coils, hot-rolled, pickled and oiled, of grade JIS G3113 SAPH 440, of a width of 600 mm or more, with a thickness of at least 2.26 mm but not exceeding 2.30 mm From March 4, 2025 to December 31, 2026 Imported for sale to company with business number 846170850 7225.50.00 Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade JIS G3135 SPFC 440, of a width of 600 mm or more, with a thickness of at least 1.32 mm but not exceeding 1.48 mm From March 4, 2025 to December 31, 2026 Imported for sale to company with business number 846170850 5.2 105062269RM0004 7217.20.00.99 Wire of carbon steel, of grade SWCH10 or SAE 1010, with a diameter of 1 inch or 1.078 inches, zinc-coated 5.3 105146526 8418.69.90.90 From April 20, 2025 to April 27, 2025 Imported for sale to company with business number 798036356 5.4 105492664RM0001 7208.26.00 From March 4, 2025 to December 31, 2032 Imported for sale to company with business number 22–2139469, 98-1238855, 380549190 or 270756180 7208.27.00 From March 4, 2025 to December 31, 2032 Imported for sale to company with business number 22–2139469, 98-1238855, 380549190 or 270756180 7210.49.00 From March 4, 2025 to December 31, 2032 Imported for sale to company with business number 22–2139469, 98-1238855, 380549190 or 270756180 7211.19.00 From March 4, 2025 to December 31, 2032 Imported for sale to company with business number 22–2139469, 98-1238855, 380549190 or 270756180 7211.23.00 From March 4, 2025 to December 31, 2032 Imported for sale to company with business number 22–2139469, 98-1238855, 380549190 or 270756180 7212.30.00 From March 4, 2025 to December 31, 2032 Imported for sale to company with business number 22–2139469, 98-1238855, 380549190 or 270756180 7606.12.00 From March 4, 2025 to December 31, 2032 Imported for sale to company with business number 22–2139469, 98-1238855, 380549190 or 270756180 6 119873420RM0002 7225.99.00 From March 13, 2025 to December 31, 2027 From March 13, 2025 to December 31, 2027 6.1 120906987 7214.20.00 From March 13, 2025 to December 31, 2027 For sale to company with business number 757303755 or 795006428 7318.19.00.00 From March 13, 2025 to December 31, 2027 For sale to company with business number 757303755 or 795006428 6.2 121832950RM0003 8518.30.90.10 From March 13, 2025 to April 4, 2025 7 123307597RM0013 7210.49.00.60 Imported for sale to vehicle manufacturers 7212.30.00.30 Imported for sale to vehicle manufacturers 7318.16.00.90 Imported for sale to vehicle manufacturers 7318.19.00 Imported for sale to vehicle manufacturers 8 123307597RM0019 7208.39.00 Imported for sale to vehicle manufacturers 7209.16.00.90 Imported for sale to vehicle manufacturers 7210.30.00 Imported for sale to vehicle manufacturers 7212.30.00.30 Imported for sale to vehicle manufacturers 7212.30.00.40 Imported for sale to vehicle manufacturers 7225.92.00.30 Imported for sale to vehicle manufacturers 7225.92.00.40 Imported for sale to vehicle manufacturers 7318.15.00.45 Imported for sale to vehicle manufacturers 7318.16.00.90 Imported for sale to vehicle manufacturers 7318.19.00 Imported for sale to vehicle manufacturers 9 123307597RM0020 7210.11.00 Imported for sale to vehicle manufacturers 7211.19.00.90 Imported for sale to vehicle manufacturers 7211.23.00 Imported for sale to vehicle manufacturers 10 123307597RM0022 7208.27.00 Imported for sale to vehicle manufacturers 7210.49.00.60 Imported for sale to vehicle manufacturers 7211.23.00 Imported for sale to vehicle manufacturers 7212.30.00.40 Imported for sale to vehicle manufacturers 7226.91.00 Imported for sale to vehicle manufacturers 7318.15.00.45 Imported for sale to vehicle manufacturers 7318.16.00.90 Imported for sale to vehicle manufacturers 11 123307597RM0029 7212.30.00.20 Imported for sale to vehicle manufacturers 7212.30.00.30 Imported for sale to vehicle manufacturers 7226.99.00.12 Imported for sale to vehicle manufacturers 7226.99.00.13 Imported for sale to vehicle manufacturers 12 123307597RM0030 7208.27.00 Imported for sale to vehicle manufacturers 7210.49.00.50 Imported for sale to vehicle manufacturers 7210.49.00.60 Imported for sale to vehicle manufacturers 7212.20.00.30 Imported for sale to vehicle manufacturers 7212.30.00.20 Imported for sale to vehicle manufacturers 7212.30.00.30 Imported for sale to vehicle manufacturers 7212.30.00.40 Imported for sale to vehicle manufacturers 7225.91.00.20 Imported for sale to vehicle manufacturers 7225.92.00.20 Imported for sale to vehicle manufacturers 7318.15.00.45 Imported for sale to vehicle manufacturers 7318.15.00.49 Imported for sale to vehicle manufacturers 7318.16.00.90 Imported for sale to vehicle manufacturers 13 123307597RM0033 7208.27.00 Imported for sale to vehicle manufacturers 7210.49.00.70 Imported for sale to vehicle manufacturers 7211.19.00.90 Imported for sale to vehicle manufacturers 7212.30.00 Imported for sale to vehicle manufacturers 7226.99.00.99 Imported for sale to vehicle manufacturers 14 123307597RM0040 7208.27.00 Imported for sale to vehicle manufacturers 7211.19.00.90 Imported for sale to vehicle manufacturers 7212.30.00.40 Imported for sale to vehicle manufacturers 14.1 125535047RM0002 9405.61.00.00 From March 24, 2025 to April 5, 2025 15 127109387RT0001 7308.90.00.99 The following guard rail end barrier systems, of specification AASHTO M180, NCHRP-350 (test level TL-3) and MASH (test level TL-3), with an A123 coating: From March 13, 2025 to April 22, 2027 Imported for supply to the ministère des Transports et de la Mobilité durable of Quebec 16 129553673 7306.30.00 March 13, 2025 to January 1, 2026 Imported for supply to company with business number 887258960 7307.22.00 March 13, 2025 to January 1, 2026 Imported for supply to company with business number 887258960 7307.23.00 March 13, 2025 to January 1, 2026 Imported for supply to company with business number 887258960 7307.29.99 March 13, 2025 to January 1, 2026 Imported for supply to company with business number 887258960 7307.99.00 March 13, 2025 to January 1, 2026 Imported for supply to company with business number 887258960 7309.00.00 March 13, 2025 to January 1, 2026 Imported for supply to company with business number 887258960 7312.10.00 March 13, 2025 to January 1, 2026 Imported for supply to company with business number 887258960 7318.14.00 March 13, 2025 to January 1, 2026 Imported for supply to company with business number 887258960 7318.15.00 March 13, 2025 to January 1, 2026 Imported for supply to company with business number 887258960 7318.16.00 March 13, 2025 to January 1, 2026 Imported for supply to company with business number 887258960 7318.19.00 March 13, 2025 to January 1, 2026 Imported for supply to company with business number 887258960 7318.22.00 March 13, 2025 to January 1, 2026 Imported for supply to company with business number 887258960 7325.99.99 March 13, 2025 to January 1, 2026 Imported for supply to company with business number 887258960 7326.90.90 March 13, 2025 to January 1, 2026 Imported for supply to company with business number 887258960 16.1 131927808RM0001 4407.19.00.99 4418.99.00.00 7308.90.00.60 7308.90.00.99 7312.10.00.31 17 133586628RM0001 7310.29.00 Tanks, casks, drums or cans, of a capacity of less than 50 litres 18 897419461RM0002, 897264149RM0005 and 867876195RM0005 7208.39.00 Imported for sale to company with business number 100963941 7210.30.00 Imported for sale to company with business number 100963941 7210.49.00.50 Imported for sale to company with business number 100963941 7210.49.00.60 Imported for sale to company with business number 100963941 7210.49.00.70 Imported for sale to company with business number 100963941 7211.29.00 Imported for sale to company with business number 100963941 7212.30.00.40 Imported for sale to company with business number 100963941 7220.20.00.90 From March 13, 2025 to December 31, 2025 From March 13, 2025 to December 31, 2025 From March 13, 2025 to December 31, 2025 From March 13, 2025 to December 31, 2025 7225.91.00.10 Imported for sale to company with business number 100963941 7225.91.00.40 Imported for sale to company with business number 100963941 7225.92.00.40 Imported for sale to company with business number 100963941 7226.99.00.19 Imported for sale to company with business number 100963941 19 140433293RC0002 7214.99.00 Bars of steel, round, of grade 40, 50 or 60, of specification CSA G40.21, ASTM A706 or ASTM A615, of a diameter of at least 0.75 inch but not exceeding 1.5 inches, of a length of at least 20 feet but not exceeding 40 feet, coated with epoxy per ASTM A775/A775M. 19.2 142692987RM0001 7208.51.00 Flat-rolled products, of iron or non-alloy steel, not in coils, not further worked than hot-rolled, not clad, plated or coated, with a width of 600 mm or more, of a thickness exceeding 10 mm 7216.99.00.10 Angles, shapes and sections of iron or non-alloy steel, other, L sections 7216.99.00.20 Angles, shapes and sections of iron or non-alloy steel, other, I or H sections 20 712584135RM0001 9506.91.00.90 Articles and parts of steel, galvanized steel, high-density polyethylene (HDPE) plastic or aluminum, used to construct outdoor play structures, including installation kits From March 21, 2025 to April 4, 2025 Imported for sale to company with the business number 857850044RT00001 20.1 716048533 7228.50.00 Other round bars, not further worked than cold formed or cold-finished, of grade 433M, with a diameter of 2.25 inches, with a length of 144 inches 7228.70.00.99 Angles, hot rolled, of specification ASTM A588, with unequal legs, with a thickness of 0.25 inch or 0.375 inch, with a length of 240 inches or 480 inches 21 721202018 7309.00.00 From March 13, 2025 to January 31, 2026 Imported for sale to company with business number 104625660 or 108128166 From March 13, 2025 to January 31, 2026 Imported for sale to company with business number 104625660 or 108128166. 7610.90.90.10 Aluminum dome, disassembled, for a 3.84 million litre custom potable water storage tank, of AWWA D103 standard From March 13, 2025 to January 31, 2026 Imported for sale to company with business number 104625660 or 108128166 21.1 722448511 7318.14.00 From March 4, 2025 to April 30, 2025 7318.15.00 From March 4, 2025 to April 30, 2025 7616.99.90 From March 4, 2025 to April 30, 2025 9403.20.00 From March 4, 2025 to April 30, 2025 22 723167151RM0001 9504.30.00 Games operated by coins, bank notes, bank cards, tokens or by other means of payment From March 4, 2025 to April 25, 2025 23 742981707PG0001 4202.12.90 Transport cases with exterior dimensions of 62.5 cm in length, 50 cm in width and 29.7 cm in height and interior dimensions of 55.9 cm in length, 43.2 cm in width and 25.4 cm in height, with lid depth of 51 mm, bottom depth of 203 mm and total depth of 254 mm From March 15, 2025 to September 1, 2025 Imported for sale to the Royal Military College of Canada 24 747542934 9506.91.00.90 Articles and equipment for general physical exercise From March 20, 2025 to March 28, 2025 25 755380318RT0001 7210.49.00.70 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, in coils, of a thickness of at least 1.6 mm but not exceeding 4.2 mm, chemically treated, with a zinc coating 7211.29.00 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, in coils, of a thickness of at least 1.6 mm but not exceeding 4.2 mm, chemically treated, with a zinc coating 7211.90.00 25.1 759532500 7601.20.00 Aluminum alloy cylindrical billets, with a diameter of at least 7 inches but not exceeding 10 inches, and with a length of at least 23 inches but not exceeding 58 inches 25.2 771066271 7323.99.00 From March 4, 2025 to August 31, 2025 Imported for sale to company with business number 896718327; or From March 4, 2025 to December 15, 2025 Imported for sale to company with business number 105195598 7616.99.90 From March 4, 2025 to August 31, 2025 Imported for sale to company with business number 896718327; or From March 4, 2025 to December 15, 2025 Imported for sale to company with business number 105195598 25.21 774214522 7214.20.00 From March 13, 2025 to December 31, 2027 For sale to company with business number 757303755 or 795006428 25.3 774937114RM0001 7210.61.00.10 Steel coils, of grade EDDS, of specification ASTM A463, with a nominal thickness of at least 0.0235 inches but not exceeding 0.0275 inches, a width of at least 32.875 inches but not exceeding 58.250 inches, and T1M-150 or T1M-120 coating, aluminized From March 4, 2025 to July 1, 2026 7210.61.00.20 Steel coils, of grade EDDS, of technical specification ASTM A463, with a minimum thickness of at least 0.060 inches but not exceeding 0.098 inches, a width of at least 31.625 inches but not exceeding 50.625 inches, with T1-40 coating, aluminized From March 4, 2025 to July 1, 2026 7606.12.00.11 Aluminum sheets, of grade 5052 H32, with a nominal thickness of 0.187 inches, with a width of 72 inches, with a length of 144 inches From March 4, 2025 to July 1, 2026 25.4[Repealed, SOR/2026-154, s. 130] 25.41 778840769RM0001 7209.17.00 From March 4, 2025 to January 1, 2031 Imported for sale to company with business number 61-1151139 or 38-1783305 7211.23.00 Flat-rolled products of non-alloy steel, not further worked than cold-rolled (cold-reduced), of grade SPC270D, with a thickness of at least 1.34 mm but not exceeding 1.46 mm, a width of at least 528.40 mm but not exceeding 531.59 mm 7318.15.00.45 Weld studs of steel, with M6 x 1 threads, with six flute, uncoated 7318.16.00.90 Steel fasteners (weld studs), zinc plated 26 780854485RM001 7228.60.00 Unthreaded rod bars of alloy steel, cold finished, ground or turned and polished, of grade 4140, of specification ASTMA108, of a length of at least 22 feet but not exceeding 40 feet, with an outer diameter of at least 1.125 inches but not exceeding 1.5 inches From March 13, 2025 to March 31, 2026 7304.31.00 Cold drawn seamless tubes of non-alloy carbon steel, meeting ASTM 519, of an outer diameter of at least 1.625 inches but not exceeding 3.75 inches, of an inner diameter of at least 0.977 inch but not exceeding 2.73 inches, of a wall thickness of at least 0.180 inch but not exceeding 0.5 inch From March 13, 2025 to March 31, 2026 7304.51.00 Cold-drawn seamless tubes of alloy steel, grades AISI 4130 or AISI 8630, meeting ASTM A519, of an outer diameter of at least 1.625 inches but not exceeding 3.75 inches, of an inner diameter of at least 0.977 inch but not exceeding 2.73 inches, of a wall thickness of at least 0.180 inch but not exceeding 0.5 inch From March 13, 2025 to March 31, 2026 7326.90.10 Forged or extruded steel blanks for coupling, cold drawn seamless, of carbon or alloy steel, meeting ASTM A519, of an outsider diameter of at least 1.625 inches but not exceeding 3.75 inches, of inner diameters of at least 0.977 inches but not exceeding 2.73 inches, of a wall thickness of at least 0.180 inch but not exceeding 0.5 inch From March 13, 2025 to March 31, 2026 27 791357346RT0001 9405.11.00 Chandeliers and other electric ceiling or wall lighting fittings, designed for use solely with light-emitting diode (LED) light sources From March 4, 2025 to April 5, 2025 9405.19.00 Chandeliers and other electric ceiling or wall lighting fittings, other than those designed for use solely with light-emitting diode (LED) light sources From March 4, 2025 to April 5, 2025 9405.21.00 Electric table, desk, bedside or floor-standing luminaires, designed for use solely with light-emitting diode (LED) light sources From March 4, 2025 to April 5, 2025 9405.29.00 Electric table, desk, bedside or floor-standing luminaires, other than those designed for use solely with light-emitting diode (LED) light sources From March 4, 2025 to April 5, 2025 9405.42 Other electric luminaires and lighting fittings, designed for use solely with light-emitting diode (LED) light sources From March 4, 2025 to April 5, 2025 9405.49 Other electric luminaires and lighting fittings, other than those designed for use solely with light-emitting diode (LED) light sources From March 4, 2025 to April 5, 2025 27.1 897528477RM0001 7308.90.00 From March 24, 2025 to April 7, 2025 Imported for sale to company with business number 798036356 7323.93.90.90 From March 24, 2025 to April 7, 2025 Imported for sale to company with business number 798036356 7324.10.00 From March 24, 2025 to April 7, 2025 Imported for sale to company with business number 798036356 7610.90.90.90 From March 24, 2025 to April 7, 2025 Imported for sale to company with business number 798036356 8302.20.00.90 From March 24, 2025 to April 7, 2025 Imported for sale to company with business number 798036356 8302.42.00.90 From March 24, 2025 to April 7, 2025 Imported for sale to company with business number 798036356 8302.50.00.10 From March 24, 2025 to April 7, 2025 Imported for sale to company with business number 798036356 8307.10.00.00 From March 24, 2025 to April 7, 2025 Imported for sale to company with business number 798036356 8418.50.10.00 From March 24, 2025 to April 7, 2025 Imported for sale to company with business number 798036356 8418.69.90 From March 24, 2025 to April 7, 2025 Imported for sale to company with business number 798036356 8419.81.00.90 From March 24, 2025 to April 7, 2025 Imported for sale to company with business number 798036356 8509.40.90.90 From March 24, 2025 to April 7, 2025 Imported for sale to company with business number 798036356 9403.10.00 From March 24, 2025 to April 7, 2025 Imported for sale to company with business number 798036356 9403.20.00 From March 24, 2025 to April 7, 2025 Imported for sale to company with business number 798036356 9403.60.90.90 From March 24, 2025 to April 7, 2025 Imported for sale to company with business number 798036356 9403.91.00.90 From March 24, 2025 to April 7, 2025 Imported for sale to company with business number 798036356 9403.99.00.99 From March 24, 2025 to April 7, 2025 Imported for sale to company with business number 798036356 9405.61.00 From March 24, 2025 to April 7, 2025 Imported for sale to company with business number 798036356 9405.99.00 From March 24, 2025 to April 7, 2025 Imported for sale to company with business number 798036356 27.2 806879862 7208.26.00.00 Imported for sale to company with business number 62-1305355 7208.27.00 Imported for sale to company with business number 62-1305355 7208.39.00.00 Imported for sale to company with business number 62-1305355 7209.16.00 Imported for sale to company with business number 62-1305355 7209.17.00 Imported for sale to company with business number 62-1305355 7210.49.00 Imported for sale to company with business number 62-1305355 7211.14.00.90 Imported for sale to company with business number 62-1305355 7211.19.00 Imported for sale to company with business number 62-1305355 7211.29.00 Imported for sale to company with business number 62-1305355 7212.30.00 Imported for sale to company with business number 62-1305355 7225.92.00 Imported for sale to company with business number 62-1305355 7225.99.00 Imported for sale to company with business number 62-1305355 7606.12.00 Imported for sale to company with business number 62-1305355 27.3 810093880 7610.90.90.90 Imported to fulfill contract PO 4955 27.4 812949071RM0001 9406.90.90 From May 1, 2025 to May 31, 2025 Imported for sale to company with business number 826019713RM0001 28 816010631RT0001 5703.29.90 Commercial-grade nylon carpet with custom-printed patterns that glow under UV lighting From March 27, 2025 to April 2, 2025. Imported for sale to company with business number 779233428 28.01 816484059 7302.90.00 Rail anchors, of steel, conforming to the standard entitled AREMA Manual for Railway Engineering, TS-1313, for 115RE rail section 28.02 818679961 7208.52.00 Flat-rolled products of carbon steel, hot-rolled, not in coils, of grades CSA 44W and ASTM A36, of a thickness of at least 4.75 mm but not exceeding 6.35 mm, of a width of at least 1 219.2 mm but not exceeding 1 524 mm, with a length of at least 2 438.4 mm but not exceeding 3 048 mm From February 1, 2026 to February 1, 2027 7208.53.00 Flat-rolled products, of carbon steel, not further worked than hot-rolled, not in coils, of grades CSA 44W and ASTM A36, of a thickness of 3 mm or more but less than 4.75 mm, of a width of at least 1.20 m but not exceeding 1.53 m, with a length of at least 2.40 m but not exceeding 3.05 m From February 1, 2026 to February 1, 2027 7208.54.00 Flat-rolled products of carbon steel, hot-rolled, not in coils, of grades CSA 44W and ASTM A36, of a thickness of at least 1.524 mm but less than 3.00 mm, of a width of at least 1 219.2 mm but not exceeding 1 524 mm, with a length of at least 2 438.4 mm but not exceeding 3 048 mm From February 1, 2026 to February 1, 2027 28.1 819576968 RM0001 7601.20.00 Aluminum alloy billets, cylindrical, with a diameter of at least 7 inches but not exceeding 10 inches, with a length of at least 23 inches but not exceeding 58 inches 28.2 819792813 7208.52.00 Flat-rolled products of non-alloy iron or steel, in steel plates, not further worked than hot-rolled, pickled, of grade SA414-G, SA516-70, CSA 44W/A36 or CSA 50W/A36, of a width of 600 mm or more, of a thickness of 4.75 mm or more but not exceeding 10 mm From March 4, 2025 to May 28, 2027 28.3 830340949 7212.30.00 Flat-rolled products of carbon steel, in coils, of specification ASTM A653/A653M, of a thickness of at least 0.35 mm but not exceeding 0.41 mm, of a width of at least 21.9 mm but not exceeding 22.3 mm, hot-dip galvanized, with a coating designation of G30 or G40 28.4 835713934 7212.40.00.29 29 838782944 8419.81.00 Portable pizza oven, of a kind for use in a food truck From March 4, 2025 to April 25, 2025 30 841564214RT0001 1003.90.91 Feed barley From March 4, 2025 to May 31, 2025 30.1 847088242 7310.29.00 Tight-head drums of carbon steel, of specification UN1A1/X1.5/250 for 1.0 gallon capacity and UN1A1/X1.3/350 for 5.0 gallon capacity From May 13, 2025 to July 16, 2025 8309.90.00.00 Hexagonal threaded closure plugs, of carbon steel, of a nominal size of 3/4 inch, zinc-plated, finished with an epoxy-phenolic coating, fitted with a nitrile rubber gasket From May 13, 2025 to July 16, 2025 31 849087549RM0001 7606.12.00 Aluminum alloy plates, sheets, and strip, rectangular (including square) of a thickness exceeding 0.2 mm 32 855808044RM0001 7209.16.00.40 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, in coils, of a thickness of at least 1 mm but not exceeding 3 mm, of specification SDI From March 13, 2025 to December 31, 2025 7225.50.00 Flat-rolled products of other alloy steel, of a width of 600 mm or more, cold-rolled, in coils, of carbon specification, dual phase uncoated From March 13, 2025 to December 31, 2025 7606.12.00.20 Aluminum plates, sheets and strip, rectangular (including square) of aluminum alloys, in coils, clad, of a thickness exceeding 0.2 mm From March 13, 2025 to December 31, 2025 33 856119151 7616.99.90 Aluminum composite material, with a thickness of 4 mm, comprised of two 0.5 mm thick sheets of aluminum that are bonded to a 3.0 mm thick thermal plastic core 33.01 861072163 3506.10.00.00 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 3824.99.00.90 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 3917.31.00.10 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 3917.31.00.90 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 3917.39.90.90 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 3919.10.99.90 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 3919.90.00.90 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 3926.90.91.30 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 4008.29.00.90 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 4009.22.00.00 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 4016.93.99.10 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 4016.93.99.30 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 4016.93.99.90 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 7306.40.00 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 7318.15.00 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 7318.16.00 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 7318.19.00.00 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 7318.22.00.00 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 7318.23.00.00 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 7318.24.00.00 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 7318.29.00.00 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 7408.29.00.00 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 7413.00.00.90 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 7415.39.00.00 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 7606.12.00.12 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 7609.00.00.00 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 7616.10.00.20 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 7616.10.00.90 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 8205.59.90.00 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 8205.70.90.00 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 8207.50.00.90 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 8207.90.90.00 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 8413.30.00.90 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 8482.10.00.51 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 8482.10.00.90 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 8482.30.00.90 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 8482.40.00.00 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 8483.30.00.29 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 8535.90.90.20 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 8547.90.00.10 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 8807.30.00.00 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 9026.10.00.99 From March 4, 2025 to January 1, 2030 Imported for sale to company with business number 871361366 33.1 869553560 RM0001 7213.91.00.50 Carbon steel wire rods hot-rolled, of grade SAE 1006, 1008/1010, 1010/1012, 1012/1015 or SAE 102, of specification ASTM A510, with a diameter of at least 5.5 mm but not exceeding 13.0 mm From March 13, 2025 to October 1, 2026 7213.91.00.60 Carbon steel wire rods, hot-rolled, of grade SAE 1030, 1042, 1047/1050, 1052/1055 or SAE 1057, of specification ASTM A510, with a diameter of at least 5.5 mm but not exceeding 11.0 mm From March 13, 2025 to October 1, 2026 7213.91.00.70 Carbon steel wire rods, hot-rolled, of grade SAE 1062, 1065, 1072, 1077, 1078 or 1080, of specification ASTM A510, with a diameter of at least 5.5 mm but not exceeding 7.0 mm From March 13, 2025 to October 1, 2026 7213.99.00.11 Carbon steel wire rods, hot-rolled, of grade SAE 1008/1010, 1010/1012 or 1047/1050, of specification ASTM A510, with a diameter of at least 14 mm but not exceeding 16 mm From March 13, 2025 to October 1, 2026 7213.99.00.31 Carbon steel wire rods, hot-rolled, of grade SAE 1047/1050, of specification ASTM A510, with a diameter of 14 mm From March 13, 2025 to October 1, 2026 33.2 870111473 7318.16.00.90 33.3 881922777RM0001 7318.15.00.42 Imported for sale to company with business number 343695967 or 833429691 7318.19.00.00 Imported for sale to company with business number 343695967 or 833429691 7318.22.00.00 Imported for sale to company with business number 343695967 or 833429691 7318.23.00.00 Imported for sale to company with business number 343695967 or 833429691 7318.29.00.00 Imported for sale to company with business number 343695967 or 833429691 7326.90.90.30 Imported for sale to company with business number 343695967 or 833429691 33.4 883281107 7226.92.00.00 Flat-rolled strip steel for automotive seat tracks, cold-rolled and annealed, of a width of less than 600 mm, with a thickness of 1.7 mm, not further worked 34 883281107RT0001 7226.92.00 Flat-rolled strip steel for automotive seat tracks, cold-rolled and annealed, of a width of less than 600 mm, 1.7 mm thick, not further worked From March 13, 2025 to December 31, 2025 35 885957597RT0001 7308.30.00.29 Rolling steel door: McKeon model IS3020E-M-PC Remission limited to one rolling steel door, imported for supply to building project at 400 Albert Street, Ottawa, Ontario 35.1 886483940RM0001 7213.10.00.90 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel, of grade 100, of specification ASTM A1035-CS, containing indentations, ribs, grooves or other deformations, of a diameter of at least 9.530 mm but not exceeding 57.350 mm, with a length not exceeding 18.288 mm 7214.10.00 Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, forged, of grade 100, of specification ASTM A1035-CS, of a diameter of at least 9.530 mm but not exceeding 57.350 mm, of a length not exceeding 18.288 mm 36 887258960 7304.39.00 From March 13, 2025 to January 1, 2026 Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan 7307.99.00 From March 13, 2025 to January 1, 2026 Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan 7308.10.00 From March 13, 2025 to January 1, 2026 Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan 7308.90.00.99 From March 13, 2025 to January 1, 2026 Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan 7309.00.00 From March 13, 2025 to January 1, 2026 Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan 7318.15.00 From March 13, 2025 to January 1, 2026 Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan 7326.19.90 From March 13, 2025 to January 1, 2026 Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan 7326.90.90 From March 13, 2025 to January 1, 2026 Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan 36.1 890777881 7307.92.00.10 Couplings for Oil Country Tubular Goods (OCTG) of iron or non-alloy steel, of grades H40, J55 and K55, manufactured to API 5CT, with an outer diameter of at least 2.375 inches but not exceeding 16.000 inches, with a length of at least 4.5 inches but not exceeding 12.0 inches From March 4, 2025 to April 1, 2027 7307.92.00.20 Couplings for Oil Country Tubular Goods (OCTG) of other alloy steel (non-stainless), of grades L80, P110 and MS110, manufactured to API 5CT, with an outer diameter of at least 2.375 inches but not exceeding 16.000 inches, with a length of at least 4.5 inches but not exceeding 12.0 inches From March 4, 2025 to April 1, 2027 37 890975758RM001 7304.19.00 Hydraulic line, male-to-male JIC, rated for a nominal pressure of 3,000 psi, with a wall thickness of 0.120 inch, with an outer diameter of 1.25 inches, of a length of 48 inches, 72 inches, 96 inches, or 108 inches, with zinc-plated coating From March 13, 2025 to December 31, 2025 7318.22.00 Washers, of a thickness of 1/4 inch, 1/2 inch, 1 inch, or 2 inches, suitable for shimming hydraulic cylinders From March 13, 2025 to December 31, 2025 38 894634112 7307.29.99.00 From March 13, 2025 to January 1, 2026 Imported for sale to company with business number 887258960 7309.00.00 From March 13, 2025 to January 1, 2026 Imported for sale to company with business number 887258960 7322.90.10 From March 13, 2025 to January 1, 2026 Imported for sale to company with business number 887258960 38.1 897475166RM0001 7308.20.00 Support towers, of steel, with a width of 10 feet, with a length of 10 feet, with a height of 100 feet, hot-dip galvanized, supplied in knockdown form for on-site assembly of grain storage systems From March 28, 2025 to May 2, 2025 7308.90.00.99 From March 28, 2025 to May 2, 2025 From March 28, 2025 to May 2, 2025 39 898667639RM0001 7307.29.99.00 Stainless‑steel push‑to‑connect quick-disconnect couplings with matching hose‑support clamps, with 1/4 inch national pipe tapered (NPT), with nitrile seals 7307.91.00.10 Hydraulic flange hose ends of carbon steel, of nominal diameter of at least 3/4 inch but not exceeding 2 inches, straight or 90 degrees, of SAE J518 Code 61 standard, with corrosion-resistant zinc‑nickel finish 7307.91.00.20 Hydraulic flange hose ends of carbon steel, of nominal diameter of at least 3/4 inch but not exceeding 2 inches, straight or 90 degrees, of SAE J518 Code 61 standard, with corrosion-resistant zinc‑nickel finish 7307.92.00.10 SAE 45 degree flare and flareless adapters for refrigeration and instrumentation applications, in brass or zinc‑plated steel, with an outer diameter of at least 6 mm but not exceeding 12 mm 7307.92.00.20 Permanent‑crimp hose ends for braided hose, made of carbon steel with zinc‑nickel plating, of nominal diameter of at least 1/4 inch but not exceeding 2 inches 7307.99.00.11 Air-brake hose with brass sockets and nipples, U.S.DOT (FMVSS 106) and Canadian CMVSS standard, of hose sizes of at least 1/4 inch but not exceeding 2 inches internal diameter 7307.99.00.19 Crimpless refrigerant fittings with bite‑type sleeve, assembly, available in carbon‑steel or brass, equipped with hydrogenated nitrile butadiene rubber (HNBR) O‑rings, for hoses of a nominal diameter of at least 1/4 inch but not exceeding 2 inches 7307.99.00.21 Crimpless repair splices and female ORFS (o-ring face seal) terminations of carbon steel, with elastomeric seals 7307.99.00.29 Permanent‑crimp hose ends for braided and spiral hose, of carbon steel with zinc‑nickel or stainless steel, for hoses of a nominal diameter of at least 1/8 inch but not exceeding 2 inches 7318.16.00.90 Carbon steel flare nut, used in hydraulic fitting assemblies and general-purpose applications 7320.20.00.90 Helical spring guards of carbon‑steel, with inner diameter of at least 7.9 mm but not exceeding 19 mm, of a length of 3.05 meters or 6.10 meters, with a finish of black oxide or bright zinc coating 7326.90.10 Non‑standard spiral‑hose crimp fittings with profiles of carbon steel, with zinc‑nickel coating, of size of at least 1/4 inch but not exceeding 2 inches 7326.90.90.90 Residual steel components: crimp ends, clamp halves, bite‑to‑wire adapters and sleeves 7609.00.00 37 degree flare adapters (male, female, union, bulkhead) and reusable sleeves for nylon air‑brake tubing, of 6061‑T6 aluminium, for hoses of nominal diameter of at least 3/16 inch but not exceeding 1 inch, with blue anodised finish 7616.99.90.90 Reusable swivel ends for use with hoses, of 6061‑T6 aluminium, with black/clear anodised, straight finish 40 899006282 9406.90.90 Prefabricated buildings From May 27, 2025 to June 30, 2025

8703.23.00.10 8703.24.00.10 8703.24.00.21 8703.24.00.22 8703.33.00.10 8703.33.00.21 8703.33.00.22

Goods Column 1 Item Tariff Classification Number 1 7210.20.00.00 2 7212.50.00.30 3 7212.50.00.40 4 7212.50.00.50 5 7212.50.00.60 6 7212.60.00.00 7 7214.30.00.10 8 7214.30.00.26 9 7214.30.00.50 10 7215.90.00.10 11 7215.90.00.20 12 7215.90.00.30 13 7215.90.00.90 14 7216.10.00.30 15 7216.32.00.10 16 7216.32.00.20 17 7216.33.00.11 18 7216.33.00.12 19 7216.33.00.13 20 7216.33.00.14 21 7216.33.00.20 22 7216.33.00.91 23 7216.33.00.92 24 7216.99.00.91 25 7219.11.00.00 26 7219.12.00.00 27 7219.13.00.00 28 7219.14.00.00 29 7219.21.00.10 30 7219.21.00.20 31 7219.22.00.10 32 7219.22.00.20 33 7219.23.00.00 34 7219.24.00.00 35 7219.31.00.00 36 7219.32.00.10 37 7219.32.00.90 38 7219.33.00.10 39 7219.33.00.90 40 7219.34.00.10 41 7219.34.00.90 42 7219.35.00.10 43 7219.35.00.90 44 7219.90.00.00 45 7220.11.00.00 46 7220.12.00.00 47 7220.20.00.10 48 7220.20.00.90 49 7220.90.00.00 50 7222.11.00.31 51 7222.11.00.91 52 7222.19.00.11 53 7222.19.00.19 54 7222.19.00.21 55 7222.19.00.29 56 7222.20.00.31 57 7222.20.00.39 58 7222.20.00.91 59 7222.20.00.93 60 7222.20.00.99 61 7222.40.00.10 62 7222.40.00.20 63 7222.40.00.90 64 7223.00.00.30 65 7223.00.00.52 66 7223.00.00.53 67 7223.00.00.54 68 7225.11.00.00 69 7225.19.00.00 70 7226.11.00.00 71 7226.19.00.00 72 7226.20.00.00 73 7228.10.00.10 74 7228.10.00.20 75 7228.20.00.40 76 7228.30.00.41 77 7228.30.00.42 78 7228.30.00.60 79 7228.30.00.74 80 7228.30.00.82 81 7228.70.00.21 82 7228.70.00.22 83 7228.70.00.30 84 7228.70.00.41 85 7228.70.00.42 86 7228.70.00.49 87 7228.70.00.60 88 7228.70.00.70 89 7228.70.00.81 90 7228.70.00.92 91 7228.80.00.11 92 7228.80.00.12 93 7228.80.00.18 94 7228.80.00.91 95 7228.80.00.98 96 7228.80.00.99 97 7301.10.00.00 98 7301.20.00.20 99 7302.10.00.11 100 7302.10.00.12 101 7302.10.00.13 102 7302.10.00.22 103 7302.30.10.00 104 7302.30.90.00 105 7302.40.00.00 106 7304.11.00.00 107 7304.19.00.13 108 7304.19.00.14 109 7304.19.00.15 110 7304.19.00.16 111 7304.19.00.19 112 7304.22.00.00 113 7304.23.00.10 114 7304.23.00.20 115 7304.24.00.00 116 7304.29.00.39 117 7304.29.00.42 118 7304.29.00.43 119 7304.29.00.44 120 7304.29.00.45 121 7304.29.00.46 122 7304.29.00.47 123 7304.29.00.49 124 7304.29.00.52 125 7304.29.00.53 126 7304.29.00.54 127 7304.29.00.55 128 7304.29.00.56 129 7304.29.00.57 130 7304.29.00.59 131 7304.29.00.62 132 7304.29.00.63 133 7304.29.00.64 134 7304.29.00.65 135 7304.29.00.66 136 7304.29.00.67 137 7304.29.00.69 138 7304.29.00.72 139 7304.29.00.73 140 7304.29.00.74 141 7304.29.00.75 142 7304.29.00.76 143 7304.29.00.77 144 7304.29.00.79 145 7304.39.00.39 146 7304.39.00.41 147 7304.39.00.42 148 7304.39.00.49 149 7304.39.00.51 150 7304.39.00.52 151 7304.39.00.59 152 7304.41.00.10 153 7304.41.00.90 154 7304.49.00.40 155 7304.49.00.90 156 7304.59.00.26 157 7304.59.00.29 158 7304.59.00.31 159 7304.59.00.32 160 7304.59.00.33 161 7304.59.00.34 162 7304.59.00.35 163 7304.59.00.36 164 7304.59.00.39 165 7304.59.00.41 166 7304.59.00.42 167 7304.59.00.43 168 7304.59.00.44 169 7304.59.00.45 170 7304.59.00.46 171 7304.59.00.49 172 7304.59.00.51 173 7304.59.00.52 174 7304.59.00.53 175 7304.59.00.54 176 7304.59.00.55 177 7304.59.00.56 178 7304.59.00.59 179 7307.29.99.00