Majority
Headnote
Master and servant — negligence — injury by cogwheels on hoisting engine — insufficiency of guard — proof not justifying recovery — evidence — photograph of similar machinery — improvements made after accident.The defendant was engaged in constructing part of the Catskill aqueduct for the city of Hew York, and plaintiff, on the 7th day of February,. 1914, while in its employ and working at shaft 21, about 725 feet under Clinton and South streets in the borough of Manhattan, Hew York, where he had been employed for about a year, sustained personal injuries and brought this action to recover therefor.
The tunnel was to be round and eleven feet in diameter when completed, and the inner surface was to be smooth and watertight, and this result was to be produced by a concrete filling around the entire interior rough surface left after the excavation. In doing the concreting at the sides and roof forms were used, and the concrete mixed at the surface of the ground was lowered through the shaft and conveyed in small iron cars, the aggregate weight of which loaded was about
The particular duties in the performance of which the plaintiff was engaged at the time of the accident were in connection with the operation of the winch to dump a car of concrete onto a platform to be used in filling a form in the arch of the. tunnel. In doing this he stood upon the platform at the side of the engine, and about one foot from the winch. From the platform on which he stood to the arch of the tunnel there was a space of about five feet, and there was a space of about two feet between the side of the engine on which he stood and that side of the tunnel. The winch projected out from the body of the engine its entire length on the side of the engine on which he stood. A tackle was attached to one of the ribs of the form for holding cement in the arch of the tunnel, and from this a hook was suspended on the end of a steel wire cable one-half inch in diameter, and the hook was attached to the top of a car in such manner as to tilt and dump it by exerting a lifting power of about 600 pounds. This steel cable passed through the tackle only a few feet distant, and from there towards the winch, and between the tackle and the winch a manilla rope one inch in diameter was attached to a loop in the end of the cable and it passed around the winch. The method of operation was for plaintiff to take two or three turns of the rope around the winch and then to stand with his right side toward the side of the engine and facing the front
The plaintiff testified in substance that he wound the rope around the winch twice and then stood in his accustomed place holding the rope and signaled the engineer to apply the power; that shortly after the power had been applied the steel cable reached and was being wound around the winch and overlapped the coils of the rope so as to bind the rope and prevent it from unwinding, and that this resulted in drawing the loose end of the rope around the winch on the under side, pulling it away from him and pulling a knot which was in the rope against his hand, and that this knocked his right hand to the right of the winch, where it was caught and crushed between the rim of the winch and the cogs of a large gear wheel which was revolving on an axis parallel to that of the winch but further back from the front of the winch and in such position that the cogs just cleared the inner end of the winch, so that about one inch of the outer surface of the cogwheel was directly beyond the inner rim of the winch nearest him.
The charge of negligence against the defendant, which was finally left to the jury, was that this large cogwheel was not
The plaintiff in his complaint, while charging the defendant with negligence in failing properly to guard the cogwheel, alleged that it “ carelessly and negligently ordered and directed plaintiff to work upon said machine, and to engage in attaching a rope to the drum thereof, and while plaintiff was engaged in performing said work, defendant carelessly and negligently caused and permitted the aforesaid unguarded gears and cogs to be revolved thereby causing plaintiff’s hand to be caught and causing him to be injured.” The notice of claim served on the defendant prior to the commencement of the action contained a charge in the same language. An affidavit made by plaintiff and used on an application for an order to examine the machinery contains the following: f ‘ And while attempting to place a rope upon or around the drum of a machine used by defendant in connection with operating cement cars in said shaft or tunnel, plaintiff’s hand was caused to be caught in the gear or cogs of said machine.”
We are also of opinion that the court erred in receiving Exhibit 5, which purports to be a photograph of a stationary
It follows, therefore, that the judgment and order should be
Clarke, P. J., McLaughlin and Smith, JJ., concurred; Dowling, J., dissented. .
Judgment and order reversed, new trial ordered, costs to appellant to abide event.