United Iron Works v. Standard Brass Casting Co.

Plaintiff instituted this action to recover the sum of $1,260 as the agreed price for casting certain check valves for the defendant according to designs furnished by the defendant and using materials also furnished by the deféndant. The answer admitted the allegations of the complaint, and by way of counterclaim and- cross-complaint alleged that the plaintiff was indebted to the defendant in the sum of $7,045.80 as damages for the breach of contract to furnish and east certain lead fittings'.

The material allegations of the cross-complaint are: About the 1st of September, 1916, defendant and plaintiff entered into a contract wherein the plaintiff agreed to furnish and cast for the defendant certain lead fittings at the rate of $3.75 per 100 pounds to be used in connection with a leaching plant; that plaintiff cast and delivered to defendant 373,701 pounds of said castings- upon which the defendant paid plaintiff in full; that said fittings were not manufactured as required by said contract in that the same contained cracks and would not hold water and were not fit for the purposes of a leaching plant; that in order to make said fittings fit for the purpose for which they were manufactured it was necessary to expend, and there was expended, the sum of $7,045.80, demand for payment of which had been made upon the plaintiff and refused. The cause was heard by the court without a jury upon these pleadings on October 31, 1917, and on January 11, 1922, the court filed its findings of fact in favor of the defendant in substantially the same language as appears in the allegations of the cross-complaint, except that in paragraph 7 thereof it was found that the sum of $4,573.09 was expended instead of the sum claimed by the defendant, and in the same paragraph the words “by defendant” were added after the word “expended,” so that the court found that this sum was expended by the defendant, whereas the cross-complaint did not allege by whom the expenditure was made. Upon these findings the trial court rendered judgment in the sum of $3,313.09,

Two appeals have been taken by the plaintiff upon the same bill of exceptions. One appeal is from the judgment, the other is from the court’s order refusing to vacate the judgment and to enter on the findings a different judgment upon the ground that the findings do not sustain the conclusions of law and the judgment. We are satisfied that the judgment must be reversed on the ground that there was no proof of damage complying with the measure prescribed by law.

The ease of respondent was based upon the theory that there was a breach of an implied warranty of fitness of an article manufactured for a particular purpose. In this connection respondent relied upon section 1770 of the Civil Code, which reads: "One who manufactures an article under an order for a particular purpose, warrants by the sale that it is reasonably fit for that purpose.” The appellant in reply insists that the code warranty is not applicable here because the contract which is claimed to have been breached is not a contract for the sale of a manufactured article, but is one for work and labor. It will be noted that the code section refers particularly to a sale and provides that the warranty shall attach “by the sale” of the manufactured article. The section is found in title 1 of part 4 of division third of the Civil Code. The subject matter of that title is “Sale,” and this subject is covered by sections 1721, the first section of the title, to 1798, inclusive. A sale is defined in section 1721 as “a contract by which, for a pecuniary consideration, called a price, one transfers to another an interest in property.” The subject of employment is treated under the heading of “Service” in title 6 of the same part and division of the code (sec. 1965 et seq.).

The distinction between a contract of sale of personal property and one for work and labor in the manufacture of a specified article becomes important in determining whether the particular contract comes within the statute of frauds. The section of the code embodied in the provisions

[1] In support of the claim that the contract in the instant case was one for work and labor and not one of sale, the appellant points out that the price to be paid was fixed on the basis of the weight of the entire deliveries under the contract, rather than upon the basis of the separate articles furnished; i. e., $3.75 per 100 pounds; that the respondent was to deliver all the material necessary for making the fittings free of cost to the manufacturer; that all metal and scrap remaining after completion of the job was to be returned to the respondent; and that the fittings were to be manufactured on the special order of the respondent in accordance with blue-prints and specifications furnished by the respondent.

Such a contract comes within the line of cases holding that a contract for work and labor rather than a contract of sale was made. Three different rules of law obtain in the interpretation of such contracts. They are referred to by the text-writers as the English, Massachusetts, and New York rules. It is not necessary to enter into a discussion of the extent of these different rules, but it is sufficient to refer to Flynn v. Dougherty, 91 Cal. 669 , 671 [ 14 L. R. A. 230 , 27 Pac. 1080 ], where the so-called Massachusetts rule was adopted as the rule of interpretation in this state. In that case the court said: “The weight of authority in this state supports the proposition, that where the seller is to furnish materials, and fashion them according to specifications furnished by the purchaser, or according to some model selected, and when, without the special contract entered into by the parties, the thing furnished would never have been put in the particular shape or condition in which it was furnished, then the contract is essentially one for labor. ’ ’ It may be added that where the purchaser furnishes the materials for the manufacture under similar circumstances there is no division of authority, but the accepted rule is that

[2] The weight of authority is that a contract to manufacture a special article for a special purpose in accordance with plans furnished by the purchaser is a contract for work and labor, particularly if the article manufactured is not suitable for sale in the general market in the ordinary course of the manufacturer’s business and the purchaser furnishes the materials. (See Bancroft v. San Francisco Tool Co., 120 Cal. 228 , 231 [ 52 Pac. 496 ]; Mannix v. Tryon, 152 Cal. 31 , 40 [ 91 Pac. 983 ]; Spencer v. Cone, 42 Mass. (1 Met.) 283 .)

[3] , Under the foregoing authorities it would seem to follow that, if the appellant had been engaged in the business of making lead castings of the particular design covered by this contract for the general market, then the rule of the Golden Eagle Milling Company case might apply, but it appears that such was not the fact, and, further, that this contract covered a special order for a special purpose in accordance with plans and specifications furnished the appellant by the respondent and which, in turn, were received by the respondent from the New Cornelia Copper Company of Ajo, Arizona, with whom the respondent had a contract for the delivery of the castings after their manufacture. 'The rule of Flynn v. Dougherty covers the case and the contract must be held to be one for work and labor and not one" of sale. The implied warranty in section 1770 of the Civil Code is not, therefore, applicable, and the measure of damages is not «for a breach of warranty, as urged by respondent, but the detriment actually suffered by appellant’s failure to perform the contract in accordance

[5] Assuming that these allegations were sufficient to admit of proof of the damages suffered by the respondent, it was incumbent upon it to show that some fault of appellants made it necessary to make the expenditures; not merely that it had paid out a certain sum for repairs to the manufactured articles. Such proof "was not made. The respondent was content with the testimony that some time after its cross-complaint was filed it had paid to the Arizona concern two checks covering the claims of the latter for repairs to the fittings. No testimony was offered to show that these claims were reasonable or that the expenditures were necessary t'o make the fittings conform to the calls of the contract. It was shown that a great number of these fittings contained cracks, and that for that reason they would not hold water, particularly under pressure. But it "was not shown that these defects could not have been repaired by the appellant at its own plant if the fittings had been rejected by the respondent at the time and place of delivery. So far as the written contract is concerned the appellant merely obligated itself to make the castings in accordance with the plans and specifications furnished by the respondent from the materials which were also furnished by the respondent^ and it was, of course, required to perform this work in a workmanlike manner. It did not, however, warrant that the castings when made in accordance with such plans would be free from leaks or that they.would be fit for respondent’s purposes. It did authorize the respondent to reject any castings which were defective and obligated itself to repair

A similar case arose in Mannix v. Tryon, 152 Cal. 31 , 40 [ 91 Pac. 983 , 987], where the supreme court was considering a contract of a subcontractor which required bim to do the plastering according to certain plans and specifications, using certain materials designated in the specifications. It appeared that the subcontractor had performed his work in accordance with the terms of the contract, but that the plastering showed a yellowish tint and other discolorations. In holding that the subcontractor should not be denied recovery upon this ground the court said: “He did not contract for results, but only to do the work in a specified way. If the usual result of white walls and ceilings did not follow, he was not responsible for it, unless there was some default on his part in furnishing the materials called for in the specifications or in doing the work with them.” In the instant case there is no allegation that the appellant did not perform its contract in accordance with its terms.

[6] The difficulty arises from the failure of the respondent to allege the true contract between the parties. That contract was in writing and differed in many respects from the one pleaded. The written contract called for the manufacture by appellant of the fittings from materials furnished by respondent and in accordance with plans and specifications also furnished by respondent. It specifically provided that all eastings not in accord with specifications should be subject to rejection and fixed the place of delivery and inspection at the appellant’s plant. It did not, however, as alleged by respondent, provide that the castings were to be

Thus, though the appellant may have had knowledge that these fittings were to be used in a leaching plant (a fact that was neither alleged nor found), it is apparent that the parties did not contract for that purpose and that the appellant did not warrant that the fittings would be suitable for that purpose. As we have endeavored to point out, the implied warranty under section 1770 of the Civil Code is inapplicable here because that section relates only to a sale of personal property. It was, therefore, incumbent upon the respondent, if relying upon a warranty of any nature, to show that such a warranty was within the contemplation of the parties to the contract. Not only do the writings constituting the contract fail to contain a warranty of fitness, but they distinctly negative the claim that such a warranty was intended. By the agreement of the parties the respondent furnished all the materials and had complete control over the mixture of antimony and lead from which the fittings were to be cast. The respondent expressly reserved the right in accepting the offer of the appellant to reject all defective castings, while the printed rules of the Foundry-men’s Association, of which both parties were members, and which admittedly were in the contemplation of both parties when the contract was made, provided that “All defective castings will be replaced and foundry shall not be responsible for any extra machine work or contingent damages caused by reason of defective castings.”

We first find that the respondent in answer to the appeal from' the judgment insists that the transaction was a sale

[7] For the foregoing reasons the judgment must be reversed. We are urged by the appellant to order the entry of judgment in its favor. The situation presented is a peculiar one. The findings, as made, support the allegations of the cross-complaint if we may infer that a special warranty of fitness was pleaded. To this extent the findings are not supported by the evidence. If no such warranty was pleaded then the findings fail to support the judgment. Thus to order judgment for appellant it would be necessary to make findings to support such a judgment. This, of course, we are unable to do. The cause must, therefore, be returned to the trial court for a new trial. Because of this

The judgment is reversed.

Langdon, P. J., and Sturtevant, J., concurred.

A petition for a rehearing of this cause was denied by the district court of appeal on November 21, 1924; and a petition by respondent to have the cause heard in the supreme court, after judgment in the district court of appeal, was denied by the supreme court on December 22, 1924.

Lennon, J., dissented from the order denying a hearing in the supreme court.