Corbett v. New York Central & Hudson Railroad

Plaintiff, a skilled mechanic employed by defendant, had been working for it in the capacity of a car repairer in its yards at Oswego for several years prior to the occurrence which is the cause of action upon which he has recovered. the judgment now before us for review.

Just before the accident plaintiff and a fellow workman in the course of their duty made some repairs to the trucks of a freight car. To make these repairs, it was necessary to take the defective trucks out from under the end of the car, which rested upon them, and to which they were attached. This required that the end of the car be raised sufficiently to free its connection with the trucks, which were then taken from under the car, and the repairs made. Two ratchet jacks, one operated on each side of the car, were used in raising it. These jacks may be used either to raise or lower heavy objects, and are equipped with a mechanical device, so that the operator can readily adjust them to operate either in raising, or lowering, the head of the jack, as desired. They have a metal socket, which is connected directly with the mechanism of the jack; and this socket, when fitted with a wooden lever, called a jack handle, forms the arm of the jack by which it is operated. These arms are worked by hand in an up and down movement similar to the operation of a pump handle. The jack handles are between four and five feet long, and are about three inches in diameter, except that each end is tapered for seven or eight inches of its length, so that either end fits the socket of the jack.

Plaintiff and his companion, having repaired the trucks and put them in position under the car, then proceeded to lower the car using the jacks, which were placed as' they had been in the operation of raising it. To lower the jack the operator first presses the arm, or handle, down until the jack unlocks, and then lets up on it until the ratchet of the jack again engages; and the movement is repeated until the object has been lowered the distance desired. .Each complete operation of the handle lowers the jack about an inch. The car had been lowered some inches, and plaintiff again put his weight upon the lever for another movement of the jack; and apparently had just released the ratchet when the jack handle broke in his hands 12 to 15 inches from the extreme end releasing the jack from the pressure.-he-was then exerting, on the .handle, and the weight of the-

[1] The trial court held that the jack was a “hoist,” “or other mechanical contrivance,” furnished by defendant for plaintiff’s use in repairing a “structure”; and, as such, came within the classification of appliances and contrivances which an employer is by the provisions of section 18 of the Labor Law prohibited from furnishing unless they are safe, suitable, and proper and so constructed as to give proper protection to the life or limb of the person so employed in repairing the structure. That the car was a “structure” within the meaning of that term as used in the statute seems to have been in effect decided in Caddy v. Interborough Rapid Transit Co., 195 N. Y. 415 , 88 N. E. 747 , 30 L. R. A. (N. S.) 30 . At the time he was hurt plaintiff was still engaged in repairing the car; for it is apparent that replacing the trucks was quite as necessary a part of the work before the car was completely repaired for service as any other thing connected with the operation.

It is doubtless true that the word “hoists,” as used in the statute, would not in the usual acceptance of the term include a jack. But, even applying the rule of ejusdem generis' in construing the statute, it would seem that a jack, used as this was in making repairs to the car, is a mechanical contrivance used in lifting, or lowering, heavy bodies, which is an accepted definition of the word; and might therefore be considered as a contrivance included-in-the generic description of the appliances which the statute in"terms designates.

[2] There was no evidence of any defect in the jack, except that furnished by the fact that the handle broke while properly used, and operated for the purpose for which defendant furnished.it. If I am right in my conclusion that an unsafe jack is an article which the statute forbids an employer to furnish for the purposes specified in-the act, then the fact that it broke under the conditions above referred to, if unexplained, was at least sufficient evidence to require the submission to the jury of the question whether the jack was defective; and a finding that defendant was negligent because it furnished an unsafe contrivance should not be disturbed. Madden v. Hughes, 185 N. Y. 466 , 78 N. E. 167 ; Gombert v. McKay, 201 N. Y. 27 , 94 N. E. 186 ; Haggblad v. Brooklyn Heights Railroad Co., 117 App. Div. 838 , 102 N. Y. Supp. 1039 ; Cummings v. Kenny, 97 App. Div. 114 , 89 N. Y. Supp. 579 ; Smith v. Variety Iron & Steel Works Co., 147 App. Div. 242 , 132 N. Y. Supp. 242 ; Huston v. Dobson, 138 App. Div. 810 , 123 N. Y. Supp. 892 .

[3] Appellant’s counsel urges that, even conceding that the jack handle was defective, it cannot be properly considered as warranting a finding that the jack itself was defective. This claim is based upon the „ fact that the jack handle was a simple appliance fitted for use in any jack of .similar-construction;- that they were furnished in sufficient quantities so that any employe could Serve himself' with a satisfactory handle, either by procuring a new. one from the shops, or by selecting any one of a number easily' accessible in the -yards, if for any reason the one he was using was unsatisfactory, and that

The judgment and order should be affirmed, with costs. All concurred.