Majority
Headnote
1. Master and Servant—Knowledge op Defects—Notice to Vice Principal.This action is—servant against master—to recover damages for personal injuries. The plaintiff, a boy of 16 years, was employed to work a power press which is set in motion by pressure of the foot upon a treadle. When the pressure is removed, the punch should come to rest. After working some two weeks in the factory, part of his thumb was cut off by the plunger or punch. The plaintiff’s claim was that the press was out of order, and the plunger moved without pressure being applied to the treadle. The defendant’s claim was that the press was nowise defective, but that the plaintiff carelessly let his foot fall on the treadle. Testimony was given to support the claims of the respective parties, both as to-the facts of the accident, and also, of an expert nature, as to the operation of such machines. At the'close of the case the defendant moved to dismiss the complaint, both on the contributory negligence of the plaintiff, and a failure to establish negligence on the part of the defendant. The exception to the refusal of the court to grant this motion, and the claim of the defendant that the verdict was against the evidence, present the only questions necessary to discuss on this appeal.
It is charged that the plaintiff was negligent in two respects. The first is that he placed his thumb under the plunger, while he "was instructed to take the disk between his finger and thumb when placing it on the die, by which only the soft parts of the fingers would be exposed. Plaintiff denies this instruction, and claims that his thumb was necessarily exposed. The jury saw the press operated at the trial and could determine whether its proper operation placed the thumb of the plaintiff in danger. The second claim is that the plaintiff knew of the defective character of the press, and, with that knowledge, continued to work on it. We think that this was not conclusively established, but was a question- for the jury to determine. Doubtless, the plaintiff knew the press had been defective, but, according to his testimony, on his complaint the press was repaired by the machinist whose duty it was to care for and repair the machines. Plaintiff was then told to go to work, and worked on the press for about an hour before the accident occurred. By his statement, during all this period, the press continued to click. To charge him with negligence, it was not only necessary to show that he knew of the clicking, but also that he knew that the clicking imported that the machine was dangerous. Not only does plaintiff swear that he did not know this fact, but it was a question most seriously litigated at the trial, the defendant’s witnesses swearing that the clicking of the press did not indicate that-it was defective or out of order.
Dissent
The court, hearing a constant repetition of the tale, in cases of accidents occurring in the use of these presses, that the press clicked, and then the punch came down without action by the operator, may be suspicious of the truth of some of these narratives. The question, however, is one of fact, for the jury, and the court is not justified in interfering, unless the verdict is manifestly against the evidence. Of course, the court will allow no verdict to stand that was based on the negation of a well-known and accepted scientific fact of common knowledge, or on the existence of a physical impossibility. But the operation of these presses is not a matter of common knowledge, and, if the movement of the plunger without pressure on the treadle is an impossibility, it was incumbent upon the defendant to establish it. The defendant did not satisfy the jury of the fact, nor has he satisfied us.
The judgment and order appealed from should be affirmed, with costs.
BROWN, P. J., and BARTLETT, J., concur.
(dissenting). The theory upon which the action was brought is that defendant was guilty of negligence in placing plaintiff at work upon a defective, dangerous, and unsafe machine, without knowledge upon his part of the defect, or means of discovering it, in consequence of which, and without fault on his part, he was injured. The testimony adduced upon the trial tended to support the theory, and the question now is, was it sufficient for that purpose? It may be conceded now that the jury were warranted, upon the evidence, in finding defendant guilty of negligence. That plaintiff was free from negligence contributing to the injury is not so clear. The testimony of plaintiff is far from satisfactory. It is alleged in the complaint that he was an infant less than 14 years of age. It was conceded upon the trial that he was past 16 when he entered defendant’s employ; and he testified that he told Mr. Kelting, ‘defendant’s foreman; that he was 17 years old then. He also testified that he told Mr. Kelting that he understood about a press, and was a press hand. But in his testimony he says that
Plaintiff, when he entered defendant’s employ, was required to oil a press, for the purpose of testing his familiarity with it. This he satisfactorily performed, and was then set at work upon one. Upon this press and another he worked six or eight days, when he was placed at work on the press where he received the injury. The motive power of all the presses was steam, and they were all operated by means of a treadle pressed downward with the foot. The press upon which the injury occurred is known as a “No. 18 Bliss Adjustable Power Press,” and was used in defendant’s factory for making tin safety caps for oil cans. The machine worked with a punch or plunger. There was a large fly or driving wheel on the right of the machine, connected with a shaft by a belt. Inside the hub of this wheel there passed an axle, and the driving wheel revolved around without moving it. The treadle was connected with a small latch, and when pressure was put upon it the latch was drawn away from a spring connected with the axle, and immediately four sections in the part of the axle inside the driving wheel be-' came loosened, and dropped into a countersunk hole in the inside of the hub of the driving wheel, into which the sections fit, locking the wheel to the axle, and communicating motion to the plunger. These movable sections are called “clutch bolts,” and, as they wear, they protrude from the surface of the axle, the extent of the protrusion depending upon the extent of the wear. This protrusion of the clutch brings it in contact with the edge of the countersunk hole, and produces a clicking noise as the wheel revolves. It is claimed that the clicking indicates that the machine is wearing and is defective. A cut of the machine accompanies the record, and conveys more vivid knowledge of the machine’s character. This description is sufficient for our present purpose. In the performance of his work, plaintiff was required to place the cap upon top of a stationary die underneath the plunger, press his foot upon the treadle, which caused the plunger to descend, coming- in contact with the cap upon the die, and pressing the pieces of tin together. The plunger was hollow' for a space, and, when down, inclosed the •die to its shoulder. Plaintiff testifies that, when he was set at work on this machine, he was instructed by the foreman to so place the caps that his fingers would come directly between the plunger and the die, and that he knew no other way of doing it. This ~was denied by defendant, who claimed that he was instructed to place the caps on with his thumb and finger, in such manner as not to bring any part of his hand between the die and the plunger. It is clearly apparent that whatever the instruction, or with none, the caps could be easily placed in position in such manner as not to bring
PBATT, J., concurs.
Cases cited
- Webber v. Piper 109 N. Y. 496 p. 318
- Fuller v. Jewett 80 N. Y. 46 p. 318
- Bushby v. New York, Lake Erie & Western Railroad 107 N. Y. 374 p. 318
- Crown v. Orr 140 N. Y. 450 p. 321